Question about Kenmore 63763 Microwave Oven

1 Answer

Stainless Steel Kenmore Elite 36 in. 2.0 cu. ft. Microhood Combination Model 63763

Stainless Steel w Kenmore Elite 36 in. 2.0 cu. ft. Microhood Combination Model 63763 Have had this since 10/04 love it! But just today when I went to use it to warm up my tea for a minute it stopped at 53 seconds (I've done this many times over!) always stops at 53 seconds! weird for some reason! Then on display panel it shows F-9. Any ideas let me know ASAP ! Thanks!

Posted by on

  • 2 more comments 
  • Anonymous Jan 04, 2008

    f9 code

  • ninzo Jan 27, 2008

    Microwave runs for 12 seconds...then stops and displays F-9 error code. A clicking noise can be heard directly behind the keypad during the 12 second run time. From what I have read here it sounds like the control board. Has anyone ever replaced one?

  • warrenray Dec 01, 2008

    O.K. Sorry I misinformed you. I opened up the microwave and found a tech sheet. F9 indicates inverter failure. 1. unplug the oven for at least 40 seconds, check to see if this solves the problem. 2. check the resistance of thermostat. it should be close to 0 ohm. 3. check wiring to inverter and control system. 4. replace inverter module. 5. if problem persist replace control system asembly. This is what it has listed.

  • Anonymous Mar 27, 2014

    ONLY BEEPS AND SHOWS"E 12" IN DISPLAY,MODEL #79080329310

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Kenmore Master
  • 9,098 Answers

Generally the F9 code indicates a problem with the door latch (usually upper) or with the control board. You can do a Google search for my text file "doorsw.txt" to help you diagnose and repair door switch trouble. BUT - since it always stops at 53 seconds, that leads me to think you have trouble with the control unit (circuit board / controller assembly). Once you read and digest the info on door switches, please feel free to do an updated post and I'll be happy to help you further. It may be corrupted ROM in the control unit. But let us know what you find out. - online they call me "William E. Miller, AS-EET"

Posted on Oct 15, 2006

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I turn off the sound on my new Kenmore Elite microwave?


I Believe this model has an options button with codes by numbers which are 1 thru 6 I believe. Either 1 or 2 are sound. So hit the options button and hit the number 1 it should say (sound), Then you will hit 1 again a.k.a. mute, and no more beep beep beep. If 1 is not sound then you may have accidently created a small but deadly emp, so hit stop and you must hit options and then hit 2.

Dec 11, 2014 | Kenmore EM262A5E Elite Stainless Steel...

1 Answer

Frigidaire microwave


Check fuse inside microwave oven (usually 8-10-12 A) on power supply board or main board, depending on model.

Dado

24927659-yz4y41jl0hlv0zh3a1frmczo-4-0.jpg

Aug 10, 2014 | Electrolux Frigidaire Gallery 30" 1.7 cu....

1 Answer

Whirlpool recall


Hi,

I just check and didn't find any posted for this model, are you having issue? What issue are you having? More information please. Thnaks

I’m happy to help further over the phone at https://www.6ya.com/expert/gere_bf68e6055dd61249

Aug 02, 2014 | Whirlpool Stainless Steel 1.9 Cu. Ft....

1 Answer

I need vent dimension for Kenmore Microhood combination model #8162. Is the vent at the back 3x10 or 3x12?


A full Sears/Kenmore model number has 3 digits, a dot, then 8 more digits, such as ###.########

Just enter your full model number at the Sears parts site.

On the resulting page, look to the right for the blue "View Manuals" button.

c9043d4.jpg

That Sears-related site has many free manuals. While the manuals they list there are all free, they will ask you to register.

Many times, the owner's manual will have the installation instructions inside. This is where you will find that information.

If yours is not listed there for free, you would have to order it through the
Sears parts site.

We're happy to help you with free advice and we'd appreciate your thoughtful rating of our answer.

Dec 16, 2008 | Kenmore 63763 Microwave Oven

1 Answer

Kenmore elite ultrawave microhood combination error code F9


F9 is normally a bad door switch or door switch mount.

If you or someone you know decide to look into it, we have critical safety information, info on door switch diagnosis and replacement, and disassembly information at our site, and our link is at our listing here on FixYa.

You can probably find exploded views and order parts by entering your model number here at the Sears parts site.

There should also be a "mini-manual" hidden inside the unit behind the control panel or hidden on the left side behind the grille, which is very helpful when troubleshooting & testing.

We're happy to help you with free advice and we'd appreciate your thoughtful rating of our answer.

Aug 22, 2008 | Kenmore Microwave Ovens

2 Answers

Amama 2.0 Cu ft. Radarange Microwave model# UXA3036BAB


This model does not list Stainless Steel as a feature. Stainless Steel is used in the interior (CAVITY) of a Microwave if it is a Combination Convection/Microwave Oven. The Convection Oven can reach temperatures of 400+ degreesF. This Temperature would MELT the paint off a painted interior.
Stainless Steel can be tested with a Magnet. It will not be attracted or "Stick" to Stainless.
Hope this answers your concerns!
Thanks!

Feb 05, 2008 | Amana ACM2160A Microwave Oven

3 Answers

Kenmore microhood model 721.80833500


our tray that goes around and back and forth jumps the tracks and stops and turns the other way I can put it back on track before it makes a round it jumps the tracks again and starts going the other way is there a part that need replaced

Jan 13, 2008 | Kenmore 80809 Microwave Oven

1 Answer

Microhood turntable not working


You can find an exploded view of your microwave at http://www3.sears.com (yes, the 3 is there). Ref # 3009 on the drawing is the turntable motor. I would grab it by the shaft and gently try to turn it. If it's locked up or grinding, that's a sign it's bad. It runs $24.49 plus shipping: Part Description: Quantity: Part Number: Model Number: Price: TT MOTOR 6549W1S013D 721.64663300 $ 24.49 $ 24.49 Be sure to unplug the oven before you work on it. Hope this helps!

Dec 01, 2006 | Kenmore 63763 Microwave Oven

Not finding what you are looking for?
Kenmore 63763 Microwave Oven Logo

1,081 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenmore Microwave Ovens Experts

William Miller
William Miller

Level 3 Expert

9098 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Chuck

Level 2 Expert

228 Answers

Are you a Kenmore Microwave Oven Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...