Question about Dell 922 All-In-One InkJet Printer

1 Answer

Refill cartridges - need to reset ink level monitors

I am trying cartridges from Cartridge World.  Dell of course does not like that and the printer will not recognize that the cartridges are full.  Is there any way to reset the monitors and read the cartridges?

Posted by on

  • buck4me Nov 09, 2008

    I have the same problem and I get my ink refilled at Walgreens. I haven't found a way to clear the ink levels any where.

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

    Sniper:

    An expert who has posted more than 50 answers, of which 90% or more were rated as helpful.

  • Expert
  • 69 Answers

I must tell you that Dell uses sensors in the ink cartridges and the printer. So one the ink cartridges is low on ink, sensor on ink cartridges will show as low and if you get it refilled, there is no way to reset the sensor to full since Dell does not want customers to use Refilled ink cartridges. However if you are looking for Low cost ink cartridges they I would suggest you to purchase Standard Capacity ink cartridges from www.dell.com/supplies. they are almost half the price for hi capacity ink cartridges.

Posted on Nov 06, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I replaced the K cartridge and i get this caution. I-Unit End Replace K


If "[Color name] Toner Empty. Replace with a new toner cartridge." is displayed and printing stops, replace with a new toner cartridge.
([Color name] indicates one of the following: C or Cyan, M or Magenta, Y or Yellow, K or Black.)

Jan 10, 2017 | The Office Equipment & Supplies

1 Answer

My Dell 3115cn printer will not connect to the network (it still works on USB cable), hard to believe it's broken, so can the printer system be reset?


Try turning off the printer and disconnecting power plug from wall. Hold power on button for about a minute. Then replug unit and turn power on - it should then attempt to hook up to your existing network.

If no go, try reinstalling the software that initially came with printer and was used to set up the network

Jan 10, 2017 | Dell Office Equipment & Supplies

1 Answer

My sharp color copier Mx 3100n is indicating F2-73 after using 88-1 how do I restore it


Hello Tijjani,
The error code that you are experiencing is as follows;
F2 73 IMPROPER TONER CARTRIDGE DETECTION (YELLOW)
You need to replace the yellow cartridge with the proper part # Item Number: MX 31NTYA, MX31NTYA.

Good Luck!
Rich Lilja

Jan 08, 2017 | SHARP MX-3100N

1 Answer

My printer brother dcp7065dn disply 71 and72 error


This is codes for the ink cartridge. The code means there is a problem with the cartridge. Change them both and restart the machine.

Jan 13, 2015 | Office Equipment & Supplies

1 Answer

Why is print quality poor after inserting new ink. Copies are faint and have lines


the cartridge is clogged with ink that has dried and reduced the slit. you need to replace the cartridge with a new one. it happens usually if you recharge the cartridge 3 or 4 times with compatible ink.

May 07, 2014 | Office Equipment & Supplies

1 Answer

How to clean ink absorber for canon mp237


First of all open the ink cartridge of your printer.
When the ink cartridge would move all the way over, then disconnect the power cord of your printer.
Now pull the frame of rubber from the printer and remove ink pads.
To clean ink pads you may place them in a bowl having warm water and start rubbing and squeezing them to clean it from ink.
After removal of ink, keep the pads separate for dry.
When the pads get dry completely, place them back in rubber frame.
Reinstall the rubber frame in your printer.
For deep guide and support refer to-
Canon Pixma Mp237 Manual

Oct 07, 2013 | Canon PIXMA MP230 Multifunction color...

6 Answers

Printer won't recognize cartridge


I had the same problem. I'm not sure but I think I replaced the cartridges when the printer was on because I turned the printer off and removed one of the cartridges. When I turned the printer back on it recognized that cartridge but not the others. I turned the printer off again, rmoved all cartiridges and put them back in when the printer was still off. When I turned the printer on again I had no problems. So...try turning off the printer, rmove all cartridges, then put them back in and restart printer. Hope this works for you .

Nov 28, 2007 | Epson Stylus 2200 InkJet Photo Printer

Not finding what you are looking for?
Dell 922 All-In-One InkJet Printer Logo

1,176 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dell Office Equipment & Supplies Experts

Prashant  Sharma
Prashant Sharma

Level 3 Expert

1127 Answers

The Knight
The Knight

Level 3 Expert

69878 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6445 Answers

Are you a Dell Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...