Question about GE 29267GE3 Corded Phone

1 Answer

Programming a 2 line ge phone

Need a manual or instructions to program emergency dial numbers

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 5 Answers

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i program your 20200-1 hand set telephone. it has 13 number memory. that i wold like to program?


To program one of the three emergency buttons:
1) lift the handset and wait for dialtone
2) press the STORE button
3) dial the phone number
4) press the STORE button
5) press one of the three emergency buttons
6) replace the handset in the cradle
To use; lift handset and press an emergency button, the phone dials the number stored for that button

To program one of the ten memory locations:
1) lift the handset and wait for dialtone
2) press the STORE button
3) dial the phone number
4) press the STORE button
5) dial a one digit number(0-9) to store the number in that location
6) replace the handset in the cradle
To use: lift the handset, press the MEMORY button, dial the memory location digit(0-9), the phone dials the number stored in that memory location


Here is a link to download the manual.
http://www.retrevo.com/search/v2/jsp/mytrevo/myTrevo.jsp?page=man

Feb 11, 2011 | Phones

1 Answer

Use only for intercom that is why we need to block the out going


There are a couple of things that make this a difficult answer. First of all, Panasonic made 2 different TA-308's, one for the U.S. market and one for the rest of the world. The U.S. 308 is non-expandable.

Pretty much, the TA-s have a similar program, so this specifically applies to the U.S. version, but it should also work for the other. This also assumes that you know how to get into system programming and are familiar with the 3 digit programming of a Panasonic system.

Do you need to allow for emergency dialing? In some areas, you cannot block it. If you don't have to worry about 911, then you can restrict access to outside lines by programming 405-407 for no line access. If you have to allow for 911 or other emergency numbers, then you have to use Toll Restriction and Class of Service.
Programs 601-603 set the COS and the manual has TRS examples, but it basically means you set the COS to something other than 1, like 5, then go into 305 and put all digits into the denied digits (using PAUSE as the wildcard). 911 will override by 309's emergency dial number set.
In passing, program 306 lets you store 80 exception codes to COS restrictions.

Carl

May 12, 2010 | Panasonic KX-TA308 Phone

2 Answers

Need help programming autodial feature on my ge-27923-ge cordless phone


how do you change GE Model 27923 2.4 GHz cordless phone from pulse dial to touch phone dial? I lost my instruction manual Thanks

Apr 15, 2009 | Phones

1 Answer

Programming one-touch dialing


I'll try my instructions and see if those are the ones you used.

Press Program 99 the button to program, dial 2+9 or whatever you use to get an outside line, and the number STORE.

Program exits programming.

Now, just press the button and it will automatically dial or you can pick up the handset and press the button.

Carl

Mar 25, 2009 | Panasonic KX-T7431 Corded Phone

2 Answers

Instruction manual for older style corded GE speaker phone


Here are the quick instructions on how to program the phone numbers.

You can also download a copy of the User's Guide from: http://www.retrevo.com/search/v2/jsp/downloadPage.jsp?doc=c96e9c823d0df43989039e5385bef04a&q=GE+29322GE1

Just enter the 4 digit captcha code and you will be able to download the User's Guide.

Please let me know if yo have any questions.

Good Luck!
++++++++

STORING A NUMBER IN MEMORY
To program priority keys:
1. Make sure the telephone is properly installed. Pick up the
handset and listen for the dial tone. If you don’t hear the
dial tone, recheck or repeat the installation steps.
2. Press the SPEAKER button or pick up the handset.
3. Press the store button.
4. Dial the number to be stored.
5. Press the store button again.
6. Press the A, B or C button.
7. Press the SPEAKER button or hang up the handset.
To program frequently called numbers:
1. Press the SPEAKER button or pick up the handset.
2. Press the store button.
3. Dial the number to be stored.
4. Press the store button again.
5. Press one of the 10 memory location buttons 0-9.
6. Press the SPEAKER button or hang up the handset.

Aug 11, 2008 | GE 29322GE1 Corded Phone

1 Answer

NorStar T7316E Corded Phone Manual


1 you can but it must be done via log on to switch with lap top (you may use handset but very tricky)
2 use feature *4

Speed dial -
using
FEATURE 0
Dial an external telephone number using a two- or three-digit code. There
are two types of speed dial codes: system (01-70 or 001 to 255) and
personal (71 to 94). System speed dial codes can be used from any
display telephone in the system. System speed dial codes are assigned by
your System Administrator.
Personal speed dial codes are used exclusively at your telephone.
To make a call using a speed dial code:
1. Press FEATURE 0.
2. Enter the two- or three-digit code for the number.
Speed dial -
programming
To program personal speed dial numbers:
1. Press FEATURE *4.
2. Enter a two-digit code from 71 to 94.
3. Specify the external line by pressing a line button, a line pool button, or
the intercom button. If you do not specify the external line, the system
automatically chooses a line for the call.
4. Dial the telephone number you want to program (up to 24 digits).
5. Press HOLD.
6. Record the code and number you have just programmed.
Note: You cannot program personal speed dial numbers while another
user is programming your system.

May 15, 2008 | NorStar T7316E Corded Phone

4 Answers

Programming instructions for used phone


Program Thomson Consumer Electronics (GE?) 2-9316A Speaker Phone (what we found works)
To program:
1. press speaker or lift handset.
2. press STORE
3. dial the number to be stored
4. press MEMORY DIAL
5. press location (0-9 on keypad or 1 of the 3 emergency quick dial)
6. press speaker or hangup.
To dial emergency numbers:
1. press speaker or lift handset.
2. press any of 3 emergency quick dial
To dial stored numbers:
1. press speaker or lift handset.
2. press MEMORY DIAL
3. press location (0-9 on keypad)
Does anyone know how to add PAUSE in a stored dial string?

Aug 27, 2007 | GE Corded Speakerphone with 2 Cordless...

1 Answer

Clear speed dial/one touch settings


There is no way to clear the settings you would have to re-program the correct setting. Did you program one touch speed dial on the line buttons? I do not see how programming a speed dial could effect accessing the CO lines unless you re-programmed the CO line buttons by mistake. If so, you would need to re-program those soft keys to line buttons. The manual you have may not cover this? The phone you have can work on a few different Panasonic phone systems. If you need a more detailed manual you will first need to know which Panasonic phone system you have. The phone part number WILL NOT help you determine which phone system you have. There is a main control unit somewhere (basement, utility closet, etc..)

Aug 13, 2007 | Panasonic KX-T7431 Corded Phone

1 Answer

Programming


MEMORY

Store as many as 12 numbers in memory for easy dialing. Three can be stored in the Emergency Quick Dial locations, and nine additional numbers can be stored in the numbered keys (1-9).

STORING A NUMBER IN MEMORY

1. Press SPEAKER (or pick up the handset).
2. Press STORE.
3. Dial the number to be stored (up to 16 digits).
4. Press STORE button.

5. Press a Memory Location (1-9 on the keypad), or an EMERGENCY QUICK DIAL button.
6. Press SPEAKER (or hang up the handset).
7. Record the phone number on the memory directory (located under the plastic cover).

ADDING A PAUSE TO THE DIALING SEQUENCE


Use the REDIAL button to insert a delay in the dialing
sequence when storing a number, for example, when you need to dial 9 to get an outside line. Press REDIAL at the point in the dialing sequence in which a pause is required.

CHANGING A STORED NUMBER


Change a stored number by replacing it with a different
number.

DIALING A NUMBER FROM MEMORY


You can dial numbers from memory when using the handset or speakerphone. When you get a dial tone, press the MEMORY DIAL button followed by the memory location (1-9) for the number you want to dial.

Apr 27, 2007 | GE 29318GE1 Corded Phone

Not finding what you are looking for?
GE 29267GE3 Corded Phone Logo

Related Topics:

154 people viewed this question

Ask a Question

Usually answered in minutes!

Top GE Phones Experts

kakima

Level 3 Expert

96664 Answers

Cindy Wells

Level 3 Expert

4759 Answers

yadayada
yadayada

Level 3 Expert

61203 Answers

Are you a GE Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...