Question about iRiver T30 MP3 Player

1 Answer

T30 always comes up with record-ready display screen

How do I get T30 to start a fresh display screen in record-ready? Always shows half black bar and minutes, seconds, etc from last save. Can not seem to refresh memory or screen even with resetting tools.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

T30 defaults to an opening display screen based on where you were when you last used the device. When leaving from the record folder and record mode, you will always open with the record-ready screen. If you left your T30 while in the music folder playing a music file, you will be returned to that.

This record-ready display screen has a numeric and bar time line. The numeric values of the line are in hrs:min:seconds. This line is also split: the right half of the line indicates the total amount of available recording time, while the left half indicates your time as you record. If you compare the values of the right and left sides of the numeric bar while you are recording, you will see that the right side is diminishing as the left side increases in numeric value. When you complete your recording and save your track, the right side will now indicate the new total time (the amount your screen first displayed LESS the time value of the track just recorded).

When you are playing a music file, if you watch the time display, you will see the numeric information changing in the same way. The left side indicates how may hrs:min:seconds your track has played while the right side indicates the total time value for that file and will be correspondingly decreasing while you play your music file.

So in the short, you don't need to worry much about your display screen unless you open in the wrong folder or you need more recording time than is available. Then it has a message for you.

Posted on Nov 07, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

LCD screen displays always "LOADING" when connected to PC USB


This is a Battery Issue as the Player is only Turning On when its Connected to the Computer!

Dec 29, 2011 | Audio Players & Recorders

2 Answers

I have an Iriver T30 and I have lost my manual?


Hello,

A manual for the T30 can be acquired going to next link:
http://www.iriverinc.com/lounge/loungeList.asp
In the bar "select a product" select your player and click GO on the right side. All support for this player will be viewed.
T30 English manual link will show up in the list. On the next page you can download the zip file for either iRiver Plus2 or Windows Media Player.

Not sure if the T30 will work with Windows 7.
It depends on the firmware you have in the player.
Normally Windows Media Player should detect the T30 in MTP mode.
When having firmware that only detects the player in MSC mode, seeing the player as a removable disk: there are MSC drivers available under software&driver ( T30umd.inf ), not sure if they'll work on Windows 7.

Feb 23, 2010 | iRiver T30 MP3 Player

2 Answers

Tried to do a restore on my 40 gig Ipod A1059. It started the restore and then it went to a screen showing a wall adapter. I always charge via USB and don't have a wall adapter. Help!?!


Tried to do a restore on my 40 gig Ipod A1059. It started the restore and then it went to a screen showing a wall adapter. I always charge via USB and don't have a wall adapter. Help!?!

Sep 22, 2009 | Apple iPod MP3 Player

1 Answer

RCA


Depends on your exact model # - these instructions are for the 1100 series: rest is on p.14 of manual
1. To start voice recording, press M twice to
access the Home menu.
2. Press or to highlight “Voice
Recording". Then press to advance.
3. Press or to highlight “Record”.
Then press to access voice recording
mode.
4. Press when the display shows “Ready” to
start voice recording.
5. Press to pause record. Press again to
resume recording.

Jun 25, 2008 | RCA TH1101 MP3 Player

1 Answer

Recording


p.14 of manual

1. To start voice recording, press M twice to
access the Home menu.
2. Press or to highlight “Voice
Recording". Then press to advance.
3. Press or to highlight “Record”.
Then press to access voice recording
mode.
4. Press when the display shows “Ready” to
start voice recording.
5. Press to pause record. Press again to
resume recording.

Jun 25, 2008 | RCA TH1101 MP3 Player

1 Answer

Recording


p.14 of manual

1. To start voice recording, press M twice to
access the Home menu.
2. Press or to highlight “Voice
Recording". Then press to advance.
3. Press or to highlight “Record”.
Then press to access voice recording
mode.
4. Press when the display shows “Ready” to
start voice recording.
5. Press to pause record. Press again to
resume recording.

Jun 23, 2008 | RCA TH1101 MP3 Player

3 Answers

Iriver T30MX


If running Windows XP, install Media Player 10 and it will recognize it.

Jeb

Jan 18, 2008 | iRiver T30 MP3 Player

2 Answers

Cannot transfer files


go to http://www.iriver.com/support/down_view.asp?searchProductIdx=73&searchCategoryIdx=1&searchString=new+firmware&page=1&idx=844&tmpSearchProductIdx=&tmpSearchCategoryIdx=&tmpSearchString=

download the updater. unzip the file and run the installation program. after you have install the iriver firmware updater, run the program. it will automatically detect what you need. follow the instructions. if the updater stops at 50% don't worry. wait bout a min or 2 then unplug your T30 and it will update by itself

Dec 07, 2007 | iRiver T30 MP3 Player

2 Answers

I cant find the songs to delete and it the refresh database fails everytime


If you cant see it in MTP mode, the MTP drivers may not be installed on your computer.

Its easier to do this than explain the other solution.

Follow these instructions and you will be back in business.

Run the recovery tool from the SanDisk website. Make sure you select "format" when prompted.

http://www.sandisk.com/Assets/File/Downloads/firmware/e200fw01.00.12.exe

You need to put the device into "recovery mode" before you run the tool.

- Turn the device off (hold power for 20 seconds)
- Slide the hold switch into "hold" position.
- Press and hold the "record" button while connecting it to your computer. Keep holding the "record" button until you see the "new hardware found" on your computer.

Then run the recovery tool. Select format when prompted.




Best of Luck.

Oct 14, 2007 | SanDisk Sansa e250 MP3 Player

2 Answers

My sansa always do restart it is not get in the main menu always do restart what to do ??


This Should fix it! Thank you for contacting SanDisk Technical Support. We should be able to fix your player. Disconnect the player from the computer if it is connected. Please copy and paste the following link into your web browser address bar, and then click Go or hit your Enter key. When prompted, choose the option to Save the file to your Desktop. http://www.sandisk.com/Assets/File/Downloads/firmware/e200fw01.00.12.exe Once you have downloaded the file, please follow these instructions. 1) Double click on My Computer so that you can see it on your screen. 2) Turn the player off. 3) On the top of the player is a Hold switch, move it to the right (toward the headphone jack) so you see Orange. 4) On the left hand side of the player is a Record button, press and hold it while connecting the player to the computer. Continue holding the Record button until you see a new icon under My Computer called 16MB FORMAT. Once you see that icon you may release the Record button. 5) Double click the file you downloaded earlier and run it. Follow all of the on-screen instructions, and when you get to the prompt where it asks you whether you would like to Format it, choose Yes. Once it is done, click Finish. 6) Disconnect the player and look at the screen. Several things will be displayed, and when you see Key Lock, System Shutdown, move the Hold switch on the top back to the left. 7) Turn the player on and watch the screen. If you see a Refresh Database Fail error, you will need to follow steps 1-7 again until you do not get the error. If it does not work the first time, it could take up to 3 times for it to work. It should be fine Welcome!!!

Aug 15, 2006 | SanDisk Sansa e250 MP3 Player

Not finding what you are looking for?
iRiver T30 MP3 Player Logo

Related Topics:

113 people viewed this question

Ask a Question

Usually answered in minutes!

Top iRiver Audio Players & Recorders Experts

kakima

Level 3 Expert

98879 Answers

Steven Wander
Steven Wander

Level 3 Expert

579 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you an iRiver Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...