Question about Rohl R77V3SPN Country Pull-Out Bar Faucet with Short Handspray - Polished N...

2 Answers

Problem taking the top cover off the Rohl R77V3SPN one handle faucet

I know I could fix my leak if I could only get the top cover off to expose the cartridge. I read the other generic way of taking the cover off but it doesn't seem to apply to this faucet. Am I missing something? The handle seems to be attached to the cover. Oh, the problem is the hot water leaking through the cartridge and onto the sink.

Thank you!

Posted by on

  • jtreibman Feb 01, 2009

    I have nearly the same model and basically the same problem. Can't figure out how to get into this assembly from the top. The Rolh website lists "easy service from above" as a feature and there is an exploded parts view that makes it clear that I should be pulling it apart from the top, but no explantion of how.

  • Anonymous May 02, 2009

    R77V3 leaks from halfway up the faucet. Can't seem to take the top cover off for repair.

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

With a small flat blade screwdriver, carefully remove the red and white plastic button on the front of the faucet. Turn off the water supply. Then, raise the handle like you're turning on the water and move the handle slowly left and right until you can see an Allen screw through the hole where the button was. With the correct size Allen driver, remove the screw and the handle will come off the faucet.

Posted on Aug 29, 2009

  • ctoensing Aug 29, 2009

    I typed too fast - remove the red and BLUE button.

  • justin tracy Mar 22, 2011

    Correct Allen Key is 3mm

×

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 9 Answers

Most single handle faucets have a plate on the underside of the sink that secures the faucet. It is generally secured from the threaded line for the pull out spout. Once you remove the line for the spout it requires a deep socket to loosen the plate. Usually a 15mm or 9/16 socket should fit. There should have been a plastic tool included with the faucet when purchased to install and disassemble this. Once this plate is removed the faucet will pull up through the sink for repair.

Good Luck

Posted on Dec 04, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The handle on my rohl kitchen faucet won't hold its position, how do you adjust or tighten the handle?


under the counter there is a nut that needs tightened . usually need a swivel head faucet wrench to get them tight .

Feb 14, 2015 | Rohl A3608LMPN Single Lever Country...

2 Answers

Would it be cartridge or something else


Not the cartridge. There are O Rings around the spout that wear out. These need replacing. Call Rohl for replacement parts

www.rohlhome.com/warranty.aspx

Jul 07, 2014 | Rohl R77V3SPN Country Pull-Out Bar Faucet...

1 Answer

How do I replace the hose on a rohl 3810 faucet pullout pray head faucet


contact ROHL customer Service, request a new hose (part number R45158), detach the end on the underside with a wrench and pull it out. Insert new hose through the topside guide neck and reconnect on the bottom connection.

Nov 02, 2013 | Rohl R77V3SPN Country Pull-Out Bar Faucet...

1 Answer

Guide to Replacing Cartridge on Rohl R77V3


Look carefully at all the prongs and receiving slots in the body of the faucet into which the cartridge goes to insure proper match.

Mar 03, 2012 | Rohl R77V3SPN Country Pull-Out Bar Faucet...

1 Answer

How do you take the cap off of a Rohl R3810STN Single handle faucet??


Under the handle is a small cap/cover remove it and the handle set screw in right there.

Feb 13, 2011 | Rohl R3830-APC de Lux Pull Out Kitchen...

1 Answer

I have a Rohl R77V3STN Pull Out Faucet, and the handle to turn on the water is becoming increasingly stiffer as I turn on the water. I see a post that says to clean and grease the seals every 2-3 years....


Call customer service right away. 1 800 777 9762
Mine is now stuck, and she said if I had called when it was still moving, they could send a free part. The only other option would be that they send a refurb faucet for a $50 charge. I said no thanks, I'm not paying another cent for this faucet--there's a lifetime warranty! The warranty states replacement of product or parts free of charge.
I'll try the part. as the faucet will move if I force it. (I used a little wd40).
Apparently mine was made in New Zealand, where the water doesn't have as much chlorine.

If the part doesn't work, I'm calling them back and raising the roof!!

Sep 26, 2010 | Rohl R77V3SPN Country Pull-Out Bar Faucet...

1 Answer

Water leaking from the faucet onto the countertop.


http://docs.homeclick.com/PE-Links/Rohl/Rohl-A3608-specs.pdf

Check out this web site and it looks like it should be a o ring at the base, anyway I hope this will be helpful.
It has a breakdown of faucet internal parts.

Jun 04, 2010 | Rohl A3608LMPN Single Lever Country...

1 Answer

I'm going tobe replacing the cartridge in my Rohl


It is highly suggested to use the grease. The purpose of the grease is for (break-in Period). Without the grease, gaskets and seals rub dry and hard against the metal surfaces and could distort or wear uneven and fail prematurely. The grease helps ease the initial wear and give a better life. Also, it isrecommended toopen a faucet and clean and grease seals and gaskets before they are bad;sort of a preventive maintainance every 2 to 3 years. Good luck, Macgivor

Jan 16, 2010 | Rohl R77V3SPN Country Pull-Out Bar Faucet...

2 Answers

Rohl 3810 kitchen pullout faucet leaks under the sink


ouch sadly im sure it was pricy to have him out  so my suggestion would be to call him back and have him take off the price of what he charged you or have him fix it for no charge could be just need some plumbers putty around the faucet to stop a little water that may seep threw under the faucet good luck 

Mar 26, 2009 | Rohl R77V3SPN Country Pull-Out Bar Faucet...

Not finding what you are looking for?
Rohl R77V3SPN Country Pull-Out Bar Faucet with Short Handspray - Polished N... Logo

1,446 people viewed this question

Ask a Question

Usually answered in minutes!

Top Rohl Plumbing Experts

Donni Steen

Level 3 Expert

659 Answers

john h

Level 3 Expert

8286 Answers

Andrew Taylor
Andrew Taylor

Level 3 Expert

13763 Answers

Are you a Rohl Plumbing Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...