Question about Lexmark T520 Laser Printer
Sensor on the Left hand side, as paper feeds into the guide from the cassette . sensor gets kocked out of position.
Posted on Nov 13, 2008
Tips for a great answer:
Aug 03, 2015 | Epson PictureMate 500 InkJet Photo Printer
Mar 05, 2011 | Kyocera Fs-1300d Printer
Nov 03, 2010 | Canon Pixma Mp250 Allinone Inkjet Photo...
Note Be careful to not force the print head to move.
If the print head is positioned at the far right hand side, you cannot move it. Please contact Brother Customer Service from "Contact Us".
Note Use a flashlight if necessary to check thoroughly.
Oct 26, 2010 | Brother Printers & Copiers
1 Switch off the printer and disconnect the power
supply. Allow any residual charge to fade away before putting your hands or
metal tools inside the chassis.
Step 2 Pin down the exact location of the jam. The
three hot spots for a jam are the paper tray, anywhere between the feed tray
and the print carriage, or between the print carriage and the output tray.
Step 3 Take off the front paper tray if the sheet got
stuck while it was still in the front area of the printer. If the sheet jammed
here, you should be able to see most of the paper.
Step 4 Pull on the sheet with both hands and steady
pressure. Do not tug as you might rip the paper, leaving a chunk of it deeper
in the machine.
Step 5 Open the back panel to reach paper jammed
between the feed tray area and the print carriage of the all-in-one printer.
Carefully remove the jammed paper from the machine.
Step 6 Use the carriage access door to reach a jam
further inside the all-in-one printer. You may need to move the print carriage
out of your way to clear the jam.
7. Step 7 Return any access panels to their closed and locked positions. Plug your printer back in and flip the power switch.
Oct 21, 2010 | HP PSC 750 All-In-One InkJet Printer
May 28, 2010 | HP LaserJet 2420 Printer
Feb 14, 2010 | OKI C5500n Printer
Feb 04, 2010 | HP Printers & Copiers
Aug 15, 2009 | Brother Printers & Copiers
Apr 19, 2009 | HP LaserJet 4 plus Printer
86 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: