Error#: 0x80040e37 Spysubtract

Kindly elaborate why cant you install it does an error message prompted when you try to the the .exe. I suggest you to download the appropriate applicaton installer for your Operating System and try to run the .exe If you are still not able to perform the installation kindly post the exact error message.

Try to run the repair.exe found in you WoW folder. ( C:\Users\Public\Games\World of Warcraft )

You also have Kasperkey ?
The error message 'CEC-MAIN.exe' is connected with the Camera Assistant Software,
You are unable to run the camera software because your KIS (Kasperkey Internet Security is blocking it by keeping "CEC-MAIN.exe" in the 'Untrusted File'.

Resolution:-

1) Launch your web browser

2) In the Notification Area (Down by your clock - Right click on the KIS icon and select "Pause Protection" > select "Resume manually"

3) In Notification Area: click on KIS icon elect "Applications under Control"

4) In the "Applications under Control" menu relocate "CEC-MAIN.exe" from the "Untrusted File" to the "Trusted File" - click "OK"

5) > Start > All Programs > CEC-MAIN icon to run your web camera program
Or My computer >> Local Disk (C) >> Program Files >> Camera Assistant Software Folder >> CEC-MAIN icon
Your webcam should now be running
Worth putting a shortcut on your Desktop at this stage .

6) With the webcam still running, then In notification Area - Right click on the KIS icon and select "Resume Protection"

7) Check the "CEC-MAIN.exe" in "Applications under Control" and confirm it is still in the "Trusted File"

8) Restart your computer

you probably tried to run google .exe.. from start ..run ..and cause this is not a windows execution it can not be run from there ...thats all....if you want to update the gmail or something like that you have to download a valid execution and run the installer..

try reading here and search for the 676.exe

http://www.exterminate-it.com/malpedia/remove-krunchy#howfiles

Well I do know that "most" 32bit software can be installed on a 64bit windows, unfortunately this one maybe be an exception. I searched all over the maker's websites and could not find a single hint of 64 bit support. One other thing you might try is to right click on setup.exe and run as an administrator , but considering the error you are recieving I don't think it will help. I don't think it is possible, sorry.

Hi there,

Check out the below link to know the error -

http://hubpages.com/hub/cmd-exe-application-error

post further comment for more help..

Good Luck!!

Thanks

Its your computer

Every time I try to run the scanner or open the imaging studio I either get a App4r.exe or Device Monitor application problem error message
Post Solution Work Queue --> Have the same problem? --> Have the same problem? Click Here
X This Problem has been added to the Share Your Expertise Page under "My Work Queue". OK

Hi, I got the same problem. The solution for me was: 1) RUN IMDATUpd.exe 2) Start SpySubtract 3) (Update needed so) Update defenition 4) Up-and-running again! Good luck and best regards, Garfied!