Question about Microwave Ovens

1 Answer

Maytag Microwave Model#MMV4205BAB

Micro went dead, outlet is good, fuses are good, don't see anything abnormal to the eye on circuit board. No lights or background or anything on display.
Any ideas?

Posted by on

  • dhr111 Dec 12, 2008

    Only 3 months old, same symptoms. Dead Microwave. Fuses behind control panel check OK. Power outlet OK.

  • geshaniii Mar 04, 2009

    Microwave won't operate. Control panel doesn't light up. Appears dead. Unplugged, waited 10 plus seconds and replugged in. Nothing. Still dead.
    Any help???


×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

My LCD read is dead. can not read any numbers.

Posted on Nov 15, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Maytag MMV4205BAB Microwave oven is dead. I checked the fuses and they are not blown. Any suggestions?


Hi,


Here is a tip that will help you to figure out what is wrong with your Microwave Oven....

Basic
Microwave Oven Troubleshooting Tips

heatman101


][]\[

Mar 04, 2011 | Maytag MMV4205 Microwave Oven

1 Answer

Problem with the Microwave Ovens Maytag Microwave Model#MMV4205BABAds by GoogleMaytag Parts Online AppliancePartsPros.com/PartsGreat prices on Maytag appliance parts. Ships same day. Order now. Micro...


Hi,
Here is a tip that will help you to figure out what is wrong with yourMicrowave Oven....

Microwave Oven Basic Troubleshooting Tips

heatman101






...................

Nov 23, 2010 | Microwave Ovens

1 Answer

My Maytag MMV1153BA Over The Range Micro suddenly lost power.


problem is a blow fuse inside the microwave, you need to call a appliance repair tech

Jun 28, 2009 | Maytag MMV1153A Microwave Oven

1 Answer

Maytag umc5200aas Microwave is totally dead.


Be careful, a Microwave can be a death trap. Check outlet to make sure it's live. Could be a failed low voltage transformer. 

Apr 23, 2008 | Maytag MMV5000 Microwave Oven

2 Answers

Repair an Amana microwave


My amana micro just went dead. No lights nothing ,almost like a fuse blew.Its an over the stove model . The outlet works fine.#mvh210w

Dec 21, 2007 | Amana AMC6158B 1000 Watts Convection /...

2 Answers

OLD Kenmore Microwave Oven


A microwave can be dead for many reasons.

If it goes dead for a while during or after cooking then comes back on, the magnetron is probably overheating and causing the magnetron thermostat to open. Then when it cools, it closes the circuit and allows power through again.

If it's intermittent or random, it may be a bad connection, usually on the control board or a loose fuse holder.

If it went dead almost immediately after pressing the Start pad, that's usually a shorted high-voltage capacitor.

If it went dead a few seconds after pressing the Start pad, that's usually a failing high-voltage transformer.

If the fuse is good, it may be an open thermostat or thermal cutout on or near the magnetron or on top of the cavity / body of the oven.

If you or a friend decide to look into it, we have critical safety information and disassembly information at our site, and our link is at our listing here on FixYa: http://tinyurl.com/yzjozk
You can probably find an exploded view by entering your FULL model number here: http://www3.sears.com (the 3 is correct)

Dec 05, 2007 | Microwave Ovens

1 Answer

Microwave completely dead


A microwave can be dead for many reasons.

If it goes dead for a while during or after cooking then comes back on, the magnetron is probably overheating and causing the magnetron thermostat to open. Then when it cools, it closes the circuit and allows power through again.

If it's intermittent or random, it may be a bad connection, usually on the control board or a loose fuse holder.

If it went dead almost immediately after pressing the Start pad, that's usually a shorted high-voltage capacitor.

If it went dead a few seconds after pressing the Start pad, that's usually a failing high-voltage transformer.

If the fuse is good, it may be an open thermostat or thermal cutout on or near the magnetron or on top of the cavity / body of the oven.

If you or a friend decide to look into it, we have critical safety information and disassembly information at our site, and our link is at our listing here on FixYa: http://tinyurl.com/yzjozk

We're happy to help and we appreciate your thoughtful rating of our answer.

Dec 04, 2007 | Maytag MMV5165 Stainless Steel 1000 Watts...

2 Answers

Micro oven went dead while it was heating.


may be high voltage crcuit , magnetron, capacitor , high voltage diodes, control unit.ar mains fuse may be glow out. check the circuit,..

Sep 25, 2007 | Frigidaire PLMV168 Microwave Oven

3 Answers

Maytag microwave - mod# mmv5100aaw


CHECK MAGNETRON RELATED CIRCUIT, HIGH VOLTAGE CIRCUIT, CONTROL CIRCUIT,AFTER CHECK MAINS FUSE.

Aug 29, 2007 | Maytag MMV1153A Microwave Oven

Not finding what you are looking for?
Microwave Ovens Logo

Related Topics:

326 people viewed this question

Ask a Question

Usually answered in minutes!

Top Microwave Ovens Experts

William Miller
William Miller

Level 3 Expert

8820 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Devabhakthuni...
Devabhakthuni...

Level 2 Expert

224 Answers

Are you a Microwave Oven Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...