Question about Projection Televisions

2 Answers

Westinghouse LCD 42" flat panel. The picture will not come on even after I unplug the TV. I get the Westinghouse insignia and then the TV shuts down.

Posted by on

  • syamamoto Nov 06, 2008

    There is no audio. You can see the blue/white light in the back of the tv, but that's about all.

  • syamamoto Nov 06, 2008

    Thanks.

×

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 899 Answers

You will need to call a repair shop to get this fixed

Posted on Nov 06, 2008

  • jason Nov 06, 2008

    sorry but that cannot be fixed here , really sorry but you will have to call your local repair shop to get this problem fixed. if you have a warranty then use it to get your tv repaired or if its bad enough they should give you a replacement

×

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Projection T... Master
  • 3,614 Answers

How about the audio? did you get any audio coming from the set/?

and also what is the status on the panel led..?

Posted on Nov 06, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I replace control board?


RCA/Westinghouse HV320WXC1007061 T-Con Boards ...

? 4:35
https://www.youtube.com/watch?v=5jO_TZfplR0
Jan 21, 2013 - Uploaded by ShopJimmy.com
RCA TV Repair Westinghouse TV Repair T Con Board Tutorial & No Picture ... Top Common LCD TV problems for bad TimingControl T-Con Boards: .... VR-3215 with no picture no sound but the power LED is solid green, any ...

RCA 276046 Power Supply Unit (PSU) Boards ... - YouTube




Nov 24, 2015 | RCA P52927 52" Rear Projection TV

2 Answers

Dark picture on wega lcd


Yes, if this TV has a bulb it is likely to be the bulb.

I am not familiar with this exact model, but other LCD Projection TV will show dim picture after some time. Expected life of the lamps is about 2yrs. After 2yrs the picture will become dim. After 5yrs I am suprised it is even working.

Dirt doesn't cause this problem unless your are a smoker or have the unit "literally" outside. DO NOT try to clean it or let someone tell you to do it because it will cause more problems than it fixes.

May 07, 2009 | Sony Grand WEGA KF-42SX300 42" LCD TV

2 Answers

LCD TV Problem


Hi,
Replace Lamp in TV and lamp replacement procedure would be written in Instruction Manual of TV.

Always buy Sony Original Lamp for smooth picture result and avoid aftermarket/ cheap lamps.

Let me know exact model number of TV if you need more help.

Apr 22, 2009 | Sony Grand WEGA KF-42SX300 42" LCD TV

1 Answer

Green picture


this is a projection television not LCD , but the problem with it being green is most likely some resistors that control the conversion IC's , and you may also have to have the IC's replaced
it will need to be tested to determine exactly what has failed , if it is a resistor then replacing the conversion IC's would be very advisable

electech

Oct 29, 2008 | Sony Grand WEGA KDF-42WE655 42" Rear...

1 Answer

Broken tv


Good Day, valkaufman;

Well, let me think???? About $300.00 or $1,200.00, again let me think?????? The new LCD FLAT PANEL's are nice! Less maintenance, but less contrtast (darkness). If you do decide to buy another....

Good Luck, big IRISH.

Jul 27, 2008 | Hitachi UltraVision CineForm 55VG825 55"...

1 Answer

Our newly purchased Toshiba - REGZA 42" 1080p Flat-Panel LCD HDTV has a fuzzy "snowy" picture. Direct TV is our satelite provider.


First check if this happens in other external video source as well, like DVD/CD/VCR, etc. If it does, get the set replaced under warranty.

If it happens only with the Direct TV setup, try unplugging the set top box from both power supply and TV. Wait about a minute and reconnect. If the problem is rectified, the issue is with the setop box. Call Direct TV in this case.

May 19, 2008 | Toshiba Projection Televisions

1 Answer

Is it repairable?


Hi Andrea,

The store selling this TV should be ashamed. It would require a least one of the circuit boards replaced to cure this type of problem. The cost of these circuit boards are very high and sometimes they are not available. In addition, Westinghouse TVs are not a good brand anymore. Try to stick with Hitachi, Sony, Toshiba, and Panasonic.

Best Regards,

MyTvGuy

P.S. Thanks in advance for rating me!

Mar 14, 2008 | Projection Televisions

1 Answer

I have a Insignia LCD (ns-lcd19)flat panel TV. I turn it on and the power comes on but I get no picture.


Check unit by shining a flash light into screen to check for image.It sounds like you have a bad inverter board.

Mar 02, 2008 | Projection Televisions

Not finding what you are looking for?
Projection Televisions Logo

Related Topics:

17 people viewed this question

Ask a Question

Usually answered in minutes!

Top Projection Televisions Experts

Jaime Hernandez

Level 3 Expert

2267 Answers

matt martin
matt martin

Level 3 Expert

1191 Answers

yadayada
yadayada

Level 3 Expert

60541 Answers

Are you a Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...