Question about PC Desktops

1 Answer

Cannot load or install any programs when computer crashes during software update of MAC OS 10.4.7 error message Version: 2.1.0 (86.1) Build Version: 36 Project Name: Installer Source Version: 860100 PID: 314 Thread: Unknown Link (dyld) error: Symbol not found: __ZN3KJS9ObjectImpC1Ev Referenced from: /System/Library/PrivateFrameworks/JavaScriptGlue.framework/Versions/A/JavaScriptGlue Expected in: /System/Library/Frameworks/WebKit.framework/Versions/A/Frameworks/JavaScriptCore.framework/Versions/A/JavaScriptCore Model: PowerMac4,2, BootROM 4.3.4f2, 1 processors, PowerPC G4 (2.1), 700 MHz, 256 MB Graphics: NVIDIA GeForce2 MX, GeForce2 MX, AGP, 32 MB Memory Module: DIMM1/J13, 256 MB, SDRAM, PC133-333 Modem: Dash2, Euro, V.92, 1.0F, APPLE VERSION 2.6.6 Network Service: Built-in Ethernet, Ethernet, en0 Parallel ATA Device: Maxtor 4D040H2, 38.16 GB Parallel ATA Device: HL-DT-ST RW/DVD GCC-4120B, USB Device: Hub in Apple Pro Keyboard, Mitsumi Electric, Up to 12 Mb/sec, 500 mA USB Device: USB Phone, BeyondTel, Up to 12 Mb/sec, 100 mA USB Device: Microsoft Wireless Optical MouseĀ® 1.0A, Microsoft, Up to 1.5 Mb/sec, 100 mA USB Device: Apple Pro Keyboard, Mitsumi Electric, Up to 12 Mb/sec, 250 mA

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Cheetah:

    An expert who has answered 20 or more questions within one hour.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 84 Answers

It seems this update for mac has caused lots of problems. go to http://discussions.apple.com
See if you can search for a solution.

Posted on Nov 06, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Is there any driver, program or software fix that will allow me to load my "Intel Create & Share Software on my Windows 7 Dell Inspiron 530?


The Intel Create & Share was written for Windows 2K and XP and not updated. The workaround is to use a computer (second machine, dual boot or virtual) with XP installed.

If you have Windows 7 Pro or Ultimate or update to one of those versions, you may be able to run a virtual XP computer for free. Download from Microsoft and install in order the Virtual PC program and the XP mode software. Install the Intel Create & Share program in XP mode as if it is your only OS. (Note: you can't have hardware installed on the virtual and real computer at the same time. To share files you will need to save them to external media (USB or optical disc).)

Other virtual computer programs are VMWare and Parallels. For the other options, you will need a licensed version of the older Windows OS.

I hope this helps.

Cindy Wells

Oct 09, 2011 | Dell PC Desktops

1 Answer

Error during capture error code 800706f8


The very first step is of course to check your webcam connection. Most webcams use the USB port to connect to the PC, so check if your USB cable is properly plugged. For build-in webcams this steps does of course not apply. Many new laptops have a build-in webcam. Also try connecting your webcam directly to your PC instead of through a USB hub (if you are using one).
The next thing is to do is to check your Windows Device Manager and see if the hardware is recognized and installed properly.
It might be that the hardware is recognized as a camera, but the right drivers are not installed. The yellow explanation mark will indicate a problem.
windows-xp-other-device.jpg If the device is not recognized in Windows XP, it will be listed under Other Devices.
windows-vista-device-error.jpg In either case you can try to update the drivers. Right-click the device, and in the popup menu select Update Driver Software. Then follow the instructions on screen, but make sure you allow Windows to search the web for updated drivers.
In case no driver for the webcam can be found, you can try a third party driver finding program that scans your PC for installed hardware and allows you to install missing drivers.
If this fails, the next step would be to uninstall the software that came with your webcam. Use the Add or Remove Programs feature in the Control Panel. If that does not work you can use a third party uninstaller.
After uninstalling the software, restart your PC and then reinstall the webcam software. In most cases this will solve the problems. Depending on the software, you might need to unplug your webcam during the software installation.
If the drivers and webcam software are correctly installed, and you still cannot see any video, there can be a problem with the program settings. Most chat and meeting software have a configuration option to select the video source for the webcam feature. If you have multiple devices that qualify for video, you might need to select your webcam device as the source for the webcam feature in that program.
Some webcams and programs require additional software, although that should be installed with the webcam if things are right. But is does not harm to check if your Java, Flash and Quicktime software are installed and up to date. But certainly check your DirectX software, since all video applications, including webcams, use DirectX for video processing. Try downloading the latest DirectX version and install it (Windows XP: DirectX 9.0c - Windows Vista: DirectX 10).
Lastly, if your webcam's image is not sharp, check to see if it has a focus ring. A blurry image can sometimes simply mean the webcam is not in focus. Adjusting the focus through the ring can solve that problem.
Other picture quality problems with webcams can be addressed by changing the video capture properties for the webcam. Most programs that can use a webcam will have an option to access the properties of the video source, which will bring up the video capture properties window.
video-capture-properties.jpg Do keep in mind that not all settings will be enabled depending on the webcam and the webcam driver installed on your computer. In the example you can see that some settings are disabled. The example shows the video capture properties for an Acer Crystal Eye webcam.
What else to try: download missing webcam drivers! If you are using your webcam for instant messaging with one of the popular chat programs, have a look at EatCam, which allows you to record your webcam chats from MSN, YM, ICQ, Skype, AIM and a few more!

Mar 05, 2011 | PC Desktops

1 Answer

How do you reset an apple macbook laptop


Don't worry just follow the below steps and you will be able to fix your problem
1
Back up your information to an external medium such as an external hard drive or a flash drive. The install process allows you to transfer current files to a fresh operating system (OS) install, but it is always best to be prepared with a backup of your files in case something goes wrong.

2
Insert the first install CD or DVD of the operating system software.

3
Restart your Mac Book or Mac Book Pro. Immediately hold down the "C" key as the computer reboots. This will cause your Mac Book to boot from the CD or DVD you inserted.

4
See the "Welcome" dialog that asks you to pick a language. It may also ask you to agree to the terms and conditions of the software install. Depending upon which OS version you are using, you might see the software perform several checks on your system. If you do not see this, do not worry.

5
Choose where to install the OS. You're most likely going to select your primary hard drive. If you have one or more partitions on your hard drive, you can select any of them as long as they are large enough.

6
Choose your install. You'll be presented with three options: "Upgrade," "Archive and Install," and "Erase and Install."
Choose "Update" to simply update the current OS install on your Mac Book. All your data, files and programs will remain intact.
Choose "Archive and Install" if you need to back up all the data on your system and import it into a fresh install of the software. You will need to reinstall much of your non-Apple software if you choose this option.
Pick "Erase and Install" if you want to erase everything on your hard drive and install a fresh version of the OS. None of your data will remain if you pick this option. This is effectively a factory reset of your Mac Book, as none of your personal settings or data will remain.

7
Choose the right setting. If you choose "Archive and Install," be sure to check the box to preserve your user and network settings. This will ensure your previous profile data is installed in the new software installation. Once you've chosen an option, select it. Click "OK."

8
Relax. The Apple OS install will take care of everything from this point. You may be prompted along the way with a few questions, but the install should be mostly automatic. When the install is complete, your Mac Book will restart.

9
Restore your data. If you chose "Upgrade" or "Archive and Install," the software will prompt you to migrate your old data to the new system. Follow the instructions to ensure your old settings and programs are transferred to the fresh install of the software.

Thanks.
Have a great day

Sep 17, 2010 | PC Desktops

1 Answer

Error Message 'F:\ setup.exe is not a valid win32 application'


This issue can be caused by any of the below possibilities.
  1. File is corrupt, bad, or missing.
  2. File is not designed for your version of Windows.
  3. File is a virus, worm, or other malware file.
  4. Hardware incompatibility.
Answer: File is corrupt, bad, or missing
If the file or program you're attempting to run is corrupt or missing, Windows will be unable to execute the file properly and sometimes generate this error message.
Download files
If you downloaded this file and verified it is complete and compatible with your version of Windows, delete the file and try downloading and running it again. It's possible during the download that the file became corrupted.
Finally, if the second download does not work, try downloading the file from a different webpage. It is possible that the person or company maintaining the website mistakenly uploaded a corrupt version of the file you're attempting download.
Installing a program from a CD or other disk
If you're attempting to install a program and are getting this error, verify that the CD is clean. If the CD is dirty or bad, you could get this error during the install and/or get this error after the program has been installed because it was not copied properly onto the computer.
  • Additional information about cleaning a CD can be found on our cleaning page.
Running a program from the computer
If you're running the program from a shortcut on the computer, verify that the program is still on the computer. In some cases if the program is no longer installed on the computer you may get this error.
If the hard disk drive is corrupted or bad it can also cause working programs to fail either because not all the data can be read from the hard disk drive or because the program has become corrupted while on the drive. Run scandisk and defrag on the hard disk drive to check for any potential errors.
Long file name issue
Make sure the program or file you're attempting to run does not contain the same name as the long file name directory it is contained in. For example, executing a file named "program" in the "program files" directory can cause errors in some versions of Windows.
Additionally, if you're attempting to install a program and after the install the program does not work, you may also want to try installing the program in a different directory.
Bad file
Any file can be changed or renamed to be a .exe file. If you're downloading the file, make sure the file is supposed to be a .exe file and that it's not being changed. If you're attempting to create a .exe, file make sure you're compiling the file for Windows and never just rename a file to a .exe file. For example, renaming a .bat file to a .exe file will not make the file an executable file. For a file to become an executable file it needs to either be compiled or converted through a software program designed to convert the file.
File is not designed for your version of Windows
If you're trying to run a program that is not designed for your version of Windows you may get this error. Although many older programs designed to work in older versions of Windows will work with new versions of Windows, unfortunately, not all programs will work.
  • If the program is an older MS-DOS program or early Windows program you may get this error.
  • If the program is designed for a 64-bit version of Windows and you're running it in a 32-bit version of Windows, it will not work and generate this error.

Mar 18, 2009 | PC Desktops

1 Answer

"-36" error message using Acomdata External Hard Drive


Have you tried taking the files off of the drive and repartitioning and reformatting the drive?
How is the drive formatted? Fat? Fat32 or HPFS? What version of Mac OS are you running? It is possible, depending on the version of the OS and the driver for the OS that it can have problems with drives that have partitions larger than 128 GB. It is also a bios limitation with older systems.
Look to see if there is an updated driver for the OS X version you are running.
Also check in the Disk Utility to see how the drive is partitioned and formatted. If it is going to be a Mac only drive, partition and format it as HPFS. If it is a drive that you will use in Windows as well, use Fat 32 and limit the partitions to 128 GB or less.

You could also try a newer version of OS X like Tiger or Leopard. They are both more stable than older versions and have better support for devices.

Cheers and good luck.

Best

Dec 27, 2008 | PC Desktops

1 Answer

Pinnacle Studio Plus version 10 Keeps Crashing


If you are getting any type of error message or warning message (except a fatal crash message), then , click here to see the FAQ titled "Studio Launch error/warning messages" to resolve these issues. For a fatal crash or any type of lockup/freezing while launching, continue with this FAQ, below.
If Studio was launching for some period of time and then it stopped launching, it is best to try to determine what changes have been made to the computer recently and undo the changes to see if it has an affect on the problem. Here's a short list of what could affect Studio's ability to launch:
  • A Studio patch was applied but it didn't install properly
  • The graphics driver was updated
  • Hardware was installed
We recommend using Windows XP System Restore. You can obtain more information on how System Restore works from the Microsoft web site at:
http://www.microsoft.com/windowsxp/using/helpandsupport/learnmore/systemrestore.mspx
Troubleshooting steps for Studio hangs or crashing while launching (starting)
1. RESTART THE COMPUTER. Try restarting the computer
2. WAIT A FEW MINUTES: If Studio still won't launch, wait a few minutes to let it finish launching. We have noticed on some computers that it may take a little while for Studio to completely launch. Studio 10 users click here to see the FAQ on this.
3. LATEST VERSION OF STUDIO. There was a launch problems in previous versions of Studio 10 that are now fixed in the latest version. When troubleshooting any problem, it is always best to be on the latest version of the software.
If you have Studio version 12, download the latest version here.

If you have Studio version 11, download the latest version here.

If you have Studio version 10, download the latest version here .

Note: Studio 11 patches will only patch a previous install of Studio 11. Studio 10 patches will only patch a previous install of Studio 10. Etc.

If you have an older version of Studio (Studio 9 or 10, etc), it is advised for you to update to the current Studio software. The current version is Studio 12. Click Here to go to the Studio 12 Upgrade page.

How to download and install a patch:
  • When downloading the patch make a note of where it is being saved to. We recommend saving the patch to the desktop.
  • Before installing the patch, make sure that you do not have any other programs running. Studio must not be running.
  • Once it is fully downloaded, double-click on the patch to begin the installation.
  • Follow any on-screen prompts to complete the installation. Reboot the computer after applying the patch.

4. SAFE MODE: Try launching Studio in Safe mode. In Safe mode, many device drivers and applications do not load. If Studio will launch in safe mode, then the issue is most likely a configuration problem with your computer. NOTE: We do not recommend using Studio in Safe Mode. This step is for testing purposes only. To start in Safe mode:
  • Shut down the computer
  • When you turn it back on, tap the F8 key every couple seconds until a menu pops up. (If the XP splash screen appears, the F8 keys was pressed too late so restart the computer and try this step again)
  • On the menu, choose Safe Mode, and then press the Enter key
  • Launch Studio
If you need help starting in Safe mode, you can click here to get information on Microsoft's web site
If Studio won't launch in Safe mode, then Studio many not be installed properly or the install may be corrupt. We recommend uninstalling and reinstalling Studio.

Click here to see the FAQ on how to uninstall, then reinstall Studio 10.

Oct 22, 2008 | Pinnacle PC Desktops

1 Answer

I purchased the Norton 360 Version 2.0 yesterday, and am trying to load it onto my machine. After checking for an updated version, I get an error message saying that the updated version will not load onto...


If you are having problems installing security software, and have 1500 documented problems, you may have a severe MALWARE infection. MALWARE (Virus, Spyware, adware etc.) often attack, disable or prevent the installation of security software.

Depending on the severity and how deeply imbedded the walware infection is determines the final resolve. UNfortunately, the final answer often is a complete reformat and reinstall of the operating system.

Things you can try:

If you can, download and run SPYBOT Search and Destroy from www.download.com

Other applications you may try to attack the problem are:

AVG antivirus from free.avg.com
ccleaner and Smitfraud fix from http://www.gur.in/download/

Often, it is just too much work to get rid of a massive infection and mort effective to format and start with a clean drive and install the security software before re-connecting to the internet.

Sep 03, 2008 | PC Desktops

1 Answer

Got Mac OS 10.5.4. Downloading Safari 3.1.1. Get message: <<You cannot install Safari on this volume. This update requires Mac OS X 10.5.2 or newer.>> Insane?


You need to update to 10.5.5. The installer apparently checks  your OS X version a few versions higher than 10.5.2, although it says otherwise.

Jul 17, 2008 | PC Desktops

2 Answers

Acer computer error number 10 when loading software


what software were you trying to install?, as a code10 error refers to hardware not software, so if it's a driver you are trying to install, the peice of hardware it refers to may be faulty.

Nov 27, 2007 | PC Desktops

Not finding what you are looking for?
PC Desktops Logo

Related Topics:

108 people viewed this question

Ask a Question

Usually answered in minutes!

Top PC Desktops Experts

joecoolvette
joecoolvette

Level 3 Expert

5660 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18304 Answers

Are you a PC Desktop Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...