Question about HP Computers & Internet

1 Answer

I have just fitted a new image fuser kit to our HP 4650 laser printer. However, the error message "replace fuser kit" reappeared on switching the printer back on. Any ideas. Have taken it out and re-seated it, but to no avail.

Posted by on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert whose answer got voted for 500 times.

  • HP Master
  • 1,314 Answers

To reset the fuser count, do the following:
1 Press to enter the MENUS.
2 Press to highlight CONFIGURE DEVICE.
3 Press to select CONFIGURE DEVICE.
4 Press to highlight RESETS.
5 Press to select RESETS.
6 Press to highlight RESET SUPPLIES.
7 Press to select RESET SUPPLIES.
8 Press to highlight NEW FUSER KIT.
9 Press to select NEW FUSER KIT.
10 Press to highlight YES.
11 Press to reset the fuser count.

Thanks and please take a moment to rate as fixya.

Posted on Nov 06, 2008


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

How to reset fuser error for hp color laser jet 4650

First make sure it is the correct fuser for that printer. Turnthe printer off. Now turn the printer on and when the memory starts to count inthe display, hold and keep holding the green check mark button on the rightuntil all three lights come on solid. Release and use the down arrow to scrollto New Maintenance Kit and hit the check mark button. Hope this will help you.

Oct 21, 2011 | Office Equipment & Supplies

1 Answer

How to reset fuser error in hp color laserjet 4650

Fuser faulty,we cannot reset the error message in til replacing the fuser..

Oct 21, 2011 | HP LaserJet 4650 Color Printer

1 Answer

I keep getting a "replace fuser kit" message on my

If you replaced with new fuser even getting same error, then check,
>Check the fuser connector (J5001). If
it is broken or damaged, replace it.
>. Check the connector (J1025) on the
DC controller PCB.
>. Replace the DC controller PCB.

Oct 07, 2011 | HP LaserJet 4700 Printer

1 Answer

I just replaced the Fuser Kit on the Office''s HP 5500 laser color printer but the error is still there and as in the instructions I never received the question: "Is this a new fuser...

Here is the instructions to reset the fuser maintenance count:

HP Color LaserJet 5500/5550 Maintenance Code Reset Instructions
  1. Press the ? button until the display reads "CONFIGURE DEVICE" and press ?.
  2. Press the ? button until the display reads "RESETS" and press ?.
  3. Press the ? button until the display reads "RESET SUPPLIES" and press ?.
  4. Press the ? button until the display reads "FUSER" and press ?
This should reset your printer and clear the error message.

I hope this helps, if so please rate my solution,


May 09, 2011 | HP LaserJet 5550 Printer

1 Answer

I just replaced the Fuser Kit on the Office''s HP 5500 laser color printer but the error is still there and as in the instructions I never received the question: "Is this a new fuser...

To reset fuser status, on the printer:

1. Press the "Menu" button
2. Navigate to "Configure Device"
3. Select "Reset Supplies"
3. Select "New Fuser Kit"

After doing so, the printer will reset the count on the fuser.

May 09, 2011 | HP LaserJet 5550 Printer

2 Answers

How to replace image fuser kit for hp laserjet 4700n

turn off the machine. open upper front cover. remove the old fuser and insert the new one. turn on the machine and enjoy your printer with new fuser kit.

Jan 20, 2010 | HP LaserJet 4700 Printer

3 Answers

Black vertical lines on laserjet 4650 print out

99% of the time, this is the imaging drum or fuser.

Pull the imaging unit (same as imaging drum - they are interchangable) and examine the greenish glass tube. Does it have black streaks along the same lines that are on the paper? If so, then it needs cleaning / replacing. Don't touch the glass!! Use Q-tips and rubbing alcohol to gently clean the lines off. Air dry and replace into the machine.

If the imaging unit doesn't have lines, then it's the fuser. This can be replaced as part of a maintenance kit. If you've been using the printer regularly for more than 9-12 months, It's probably time for a Maintenance Kit for the machine anyway, which includes a fuser. I recommend Parts Now ( for replacement kits, which have instructions on how to install with them.

Jun 22, 2009 | HP LaserJet 4650 Color Printer

3 Answers

Hp 4650 n - New Fuser Kit

Under the menu>Configure Device>Resets>Reset Supplies>New Fuser Kit

Oct 28, 2008 | HP LaserJet 4650n Printer

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

163 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Computers & Internet Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18417 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers


Level 3 Expert

538 Answers

Are you a HP Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides