HP Photosmart C3150 compatability with print server
Does anyone know of a print server that is compatible with the HP C3150? I have tried to get it to work with the Linksys PSUS4 and it is not going to happen. I have 2 laptops in the house using my wireless network and want to be able to print from them.
An expert who has achieved level 2 by getting 100 points
An expert that got 5 achievements.
An expert who has written 50 answers of more than 400 characters.
An expert whose answer got voted for 20 times.
Re: HP Photosmart C3150 compatability with print server
I have a same print server but it works with my Epson printer. Well most print server manufacturers claim that their device should work but in reality they are still subjected to hardware compatibilities some printers will not work, I suggest you just try the same manufacturer as your printer, it may be a bit expensive than universal print servers but atleast your guaranteed that they will work and if it doesn't you have one company to deal with instead of you getting a run around by both companies on who'se fault is it why and why it's not working as they claim.
Anyways here's a link for HP's "wired" printservers.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
it is the version of software that was released to be compatible with win 7. the copy feature was removed. you can try running the original install disk in a compatibility mode
right click on the setup.exe
left click on properties
click on the compatibility tab
check the box for compatibility mode, and choose Vista Service Pack 2
check the "run as administrator" box
right click the setup.exe and use "run as administrator" (yes, this may seem redundant)
ok ill tell you what call in to hp at 1800-474-6836 and tell them about your issue we just need to regionalize the printer. absolutely nothing else . when you call in you will be directed to an agent ask him to regionalize the printer
You asked for any advice. If you want to use a server, you must already have at least a home network set up (it could be wireless or hard-wired). Yes, stand-alone "print servers" are notorious for only supporting certain printers. If you don't know this before you buy, you may find yourself returning your print server to the store. However, instead of a standalone print server, have you considered setting up one of the computers in your network as a "print server"? That's the way it used to be done. That's the way my own network is set up. You would set up your multifunction printer as connected directly to one of the computers in your network. Enable "printer sharing" on that computer. Then do the following on all other computers in the network for which you desire access to the printer: Add a network printer. If asked for drivers, get them off the printer's installation CD.