Question about GE 2-9450C Corded Phone

Open Question

GE Model 2-9450 Telephone

Busy/Redial button flashing. Unplugged phone & removed battery. Still cannot get light to stop flashing or reprogram station number. Is there any to reset these phones to factory default settings?

Thanks Joe

Posted by on

6 Suggested Answers

  • 3 Answers

SOURCE: New Voice Mail flashing light

What worked for me was to call my phone from another phone and leave myself a voicemail. I then went in and retrieved and deleted that voicemail. Once I hung up from my voicemail service my handsets reset about 10 seconds later.

I hope this helps!

Posted on Jun 05, 2008

Fixe_You
  • 1800 Answers

SOURCE: Resetting phones and restoring to full factory default.

okay i will fix the prob but i need model name
and fix ya rate after giving the solution okay??

Posted on Aug 19, 2008

  • 1 Answer

SOURCE: GE PHONE/ANSWERING MACHINE MODEL 25952EE3-A

I am getting a "new voice mail " message on the receiver. I can't access it. I have had the phone for 6 months and never saw that before. I did however just get Verizon Vios installed.

Posted on Sep 28, 2008

cnavarro
  • 2460 Answers

SOURCE: How to enter phone numbers into the memory/speed dial?

The manual from the GE web site is here:

http://www.home-electronics.net/ge/pc/IB/29267GE3_IB.pdf

It's a pretty straightforward process, Pick up the handset press STORE a location (0-9) STORE dial the number STORE

With only 10 storable numbers it's pretty thin, but you also have the last 50 CID numbers to dial. If you live in an area with more than one local area code (overlays) and mixed 10 digit dialing, it looks like you may have some programming to do to make it dial CID numbers properly.

Carl

Posted on Apr 21, 2009

  • 22 Answers

SOURCE: New Voice Mail flashing light

press "mute" key to access menu, press the up or down arrow key labeled "caller ID- volume" until you get to "handset setup", press the "mute" key again, press the down or up arrow until you have "defaultsetting" selected, press "mute" key, press "1", then press "mute" once more. At this point your handset will reset clearing the indicator for all the handsets. I've had to do this twice on my phones and it worked every time.

Posted on Feb 11, 2010

hmerchant110
  • 7191 Answers

SOURCE: I need an instruction book for multi memory GE

Hi,

You can download and print the instruction manual in PDF format by clicking this link:

http://www.home-electronics.net/ge/pc/IB/29385GE1_IB.pdf

You'll require Adobe PDF Reader installed on your computer to view the manual. If it is not already installed on your computer, download it free from: http://get.adobe.com/reader/

Hope this solves your problem. Thanks for using FixYa.

Posted on Aug 29, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My LCD Prostar 816 shows the Speaker light flashing rapidly. When I click on it, it takes me to an Internal Page screen. I can clear out of that, but I get the flashing Speaker light again. This happened...


Aflashinf speaker key indicates that the phone is fowarded.It's either call foward all calls or call foward on busy.
To cancel call forward all calls, press #11 (with the handset in the cradle), then press your own dss button or dial you own extension number (21-36), and press #.
Canceling call foward on busy uses the same steps but uses #12 instead of #11 for the first step.

May 03, 2010 | Samsung Prostar 816 Phone

1 Answer

Automatic redial malfunction


It's been a long time since I have used Panasonic analog phones, but the redial function in them used to be mechanical. It dialed 15 times with a 45 second pause between attempts. The key was, it expected you to pick up the handset, cancelling the redial if you got an answer.
If you got an answer and didn't do anything, it hung up and redialed again until you picked up the handset!

Could that be what your system is doing?

Carl

Sep 14, 2009 | Panasonic Phones

1 Answer

How do you set the timeand date on a toshiba dkt


Hi there,

Please try this..

  1. From main console phone (lowest extension number i.e. x100) pick up handset and dial following codes:
  2. For Date: 651 YYMMDD Redial ----(YY=year, MM=month, DD=day)
  3. For Time: 652 HHMMSS Redial ----(HH=hours in 24hr clock, MM=minutes, SS=seconds)
  4. For Day of Week: 653 X Redial ----(X=day of week 1=sunday, 2=monday....etc.)
If won't work, try this

From Extension port 00 (usualy station 200)
  1. Lift Handset Dial #652
  2. Enter Correct Time HH MM SS
  3. Press Redial
  4. Replace Handset
Regards,
Jeep Brainy

Aug 10, 2009 | Toshiba DKT-2020-SD telephone

2 Answers

When I redial a number outside of my area code, how do I set up my phone to redial an automatic 1 before the number I want to dial? I have a GE cordles 28111 model


I can't redial.. How do I set up my phone to redial an automatic 1 before the number I want to dial? i have a GE digital 5-8

May 07, 2009 | Uniden Cordless Phone

1 Answer

The caller id on my vtech cordless phone stopped coming in clearly, why?


Try unplugging your base station (where the power and the telephone cable plugs into) leaving it unplugged, get your telephone set and take out the battery.

Put the battery back in your phone and power up your phone.
When the phone is back up and running, plug everything back into the base station... and test your caller id.

The telephone's base station sometimes needs a reboot. There are power spikes on the telephone line every-so-often and can do funny things to your telephone set.

I hope this helps.

May 02, 2009 | Phones

1 Answer

Answering machine is flashing F and then 00


check battery and let get a full charge FULL

Apr 02, 2009 | Phones

1 Answer

Flashing CL


Find the button for day,and set the day, find the hour button, set the hour, and find the minute button and set the minute, then the phone will not flash CL

Feb 03, 2009 | GE Telephone pr521w

1 Answer

SPEED DIAL


station speed dial:
redial, speed dial 10-49
telephone number
redial
info@ameritelnj.com
Tony

Jan 22, 2009 | Toshiba DKT2010SD Phone

5 Answers

My intercom button flashed red to green. When I push a line button, I get a two-tone beep but no dial tone. I changed the internal 9 v battery. I unplugged the phone and waited, then plugged it back in....


Each telephone must be connected to line 1 and line 2 for
proper operation. The remaining lines 3 and 4 may — or may not —
be connected to each station as you desire. First plug in the battery, then the phone lines (1 & 2 are mandatory), and third the power cord. If your intercome LED is blinking red and green, then press: STORE IN, followed by "INTERCOM" followed by a free intercom# (i.e., any of the memory buttons 1 through 16 not already assigned to another telephone set). Then wait for the phone to go through its initiation sequence during which it searches each of the four possible lines. After that concludes, you should get dial tone on your active lines. :-) Marco

Aug 29, 2007 | GE 2-9450C Corded Phone

1 Answer

Line 2 continually flashes on GE 29490GE2 Corded Phone


Does it flash when you try to fax? (Or) Does it flash and when you try to fax it shows busy? Your phone most likely has a line in use detection circuit so when a line is being used by another phone (or device) you will know to choose the other line. These detection circuits can sometimes be fooled, confused or even cause problems with other telepones.

Jul 06, 2007 | GE 29490GE2 Corded Phone

Not finding what you are looking for?
Phones Logo

Related Topics:

140 people viewed this question

Ask a Question

Usually answered in minutes!

Top GE Phones Experts

kakima

Level 3 Expert

96683 Answers

Cindy Wells

Level 3 Expert

4761 Answers

yadayada
yadayada

Level 3 Expert

61249 Answers

Are you a GE Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...