Question about Washing Machines

1 Answer

Fault c 9 is flashing on my oko lavamat 86720

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

I FOUND OUT THAT C9 WAS SOMETHING WRONG IN THE MOTOR. CHECKED OUT MOTOR AND FOUND THAT THE BRUSHES WERE WORN OUT AND I REPLACED THEM. I THOUGHT THAT WAS MY PROBLEM SOLVED BUT IT WAS NOT THE LIGHTS WERE STILL FLASHING AND C 9 STILL THERE. I PHONED A FRIEND WHO FIXES APPLIANCES.. HE TOLD ME WHAT TO DO TO CONFIGURE IT. LEAVE THE MACHINE OFF AND PRESS THE PRE WASH AND SOAKING BUTTONS TOGETHER AND SWITCH ON. ALL LIGHTS WILL COME ON AND AND MACHINE WILL WORK IT DID BUT YOU MIGHT HAVE TO DO IT A COUPLE OF TIMES.

Posted on Nov 07, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Mijn AEG oko lavamat 72620 meld code 9


Hi from retired Englishman in SW France,

AEG code 9- tacho/motor fault ;-0(
Sorry,
John C

Mar 19, 2011 | AEG Washing Machines

1 Answer

Aeg oko lavamat 72600 update, ce error code showing any idea?


error code ce is a faulty water distributor fault . you have to replace the top part of the soap dispensor compartment. sometimes you can hear a clicking noise when its trying to operate

Jul 09, 2010 | AEG Lavamat 72640 Front Load Washer

2 Answers

What means error code "C9" ? AEG Lavamat 76669


Hi,

C9 Indicates Motor Fault. It seems that the Carbon Brushes have Worn out.

Replace it and more likely it would Fix the Problem.Once you replace that, you need to put the machine into Service Mode to Reset the Error.

Steps for Reset the Error Code

1. Press and Hold the Prewash and Soaking Buttons Together.
2. Whilst Holding them, Turn the Dial from Off one Click Anti Clockwise

Note - If problem persists, Check the motor plug for broken wires and check the state of the carbon brushes.

Let me know, if needed further assistance.

Hope i helped you.

Thanks for using ' Fixya ' and have a nice day!!

Feb 28, 2010 | AEG Lavamat 88840 Front Load Washer

2 Answers

AEG 72640 stopping mid-cycle no error code showing


I have the same problem with my Oko Lavamat 74639 Update. I've tried changing the vacuum sensor, but no luck.
Did you get your fixed?
Olafur

Oct 19, 2009 | AEG Lavamat 72640 Front Load Washer

6 Answers

Aeg oko_lavamat 508- not enough water


Have law level water problem in my clothes washing AEG Lavamant OKO 508.

Jun 01, 2008 | Kenmore Elite 45986 Front Load Washer

1 Answer

Aeg washing machine fault code


This error code means your water sensor has detected a leak. it will stop when the sensor is dry.
Try getting the water out of the trap door and letting the machine dry.

I would also unplug it for secirity reasons.

Basically your water pump is getting tired or the sensor is dirty. Try cleaning the sensor or else you may have to change the pump.

May 08, 2008 | AEG L86800 Front Load Washer

3 Answers

AEG Lavamat 86720 washing machine fault code C3 with buzzer and pre-wash and main wash lights flashing


Hello,
This means your water sensor has detected a leak. it will stop when the sensor is dry.
Try getting the water out of the trap door and letting the machine dry.

I would also unplug it for secirity reasons.

Basically your water pump is getting tired or the sensor is dirty. Try cleaning the sensor or else you may have to change the pump.

post further comment for more help......

May 05, 2008 | AEG L86800 Front Load Washer

Not finding what you are looking for?
Washing Machines Logo

Related Topics:

131 people viewed this question

Ask a Question

Usually answered in minutes!

Top Washing Machines Experts

Dan Webster
Dan Webster

Level 3 Expert

8147 Answers

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...