- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
To reset the password you need to first restore this unit to factory defaults. Then you can use the default code "0000" or have the old code and change it to a different code entering the old code first.
To restore to factory defaults follow these steps -
Use the ^ v arrows to select "erase all channels" or "factory default."
Now press the OK button.
There will be a warning display then just press "OK" again.
The receiver is now restored to factory defaults.
Now the code should be set to factory "0000."
Please not that this is the only way to do this unless you have the original code.
contact directv at 800-531-5000 to have them reset your passcode. it can only be done through them. if you have access to your account by website, you may be able to unlock the passcode there. easiest is to call them to have it unlocked
If you only get level signal on the traxis 1500, it means that you may have a defective LM317 IC or a TIP42C. This part is mounted on a heatsink.
Try checking the LNB frecuency as well and make sure you have the same settings as your Pansat.