Question about VistaQuest VQ-5010 Digital Camera

1 Answer

Still nothin'! Thank you so much for trying to help me. I know you must be a littletired of me. I may just be a long lost cause. This is what is going on.I have downloaded the driver. The driver shows up on my desktop.The battery and memory card are in the camera. I turn the camera on andinsert the usb cord, nothing. The camera is set up exactly like how thebook says. The VistaQuest picture comes on and stays in and so does thegreenlight. Once this comes on the camera's screen, you can hit any buttonyou want and the VQ picture will not leave the screen. I have gone toMy Computer and I don't see anything stating memory card. I have all ofthese pictures on my camera and I can't get them off. When I plug thecord to the camera, I don't get the plug-in pop up from Windows either.Should I just take the camera to the local Rite Aid and have the,remove the pictures?

Posted by on

  • Tamiya Nov 06, 2008

    I'm sorry, but I don't get any of that. When I try to open the XQ driver that is on my desktop, it it starts to open up, but then is stops and says that there is some type of error and terminates. the error message is Incompatible version of the RPC stub....yeah. I give up. Thanks so much for trying. Rite Aid...here i come!



  • Anonymous Mar 16, 2014

    I put brand new batteries in it and turned the camera on but there's no image on the screen even though the light to say the camera is on is working, the camera won't take pictures or go to the menu or anything. It won't even shut off, you have to take the batteries out to get it to turn off.
    It has not been dropped, or gotten wet and I never leave batteries in it for extended period of time. I can take pictures off that were already on the camera. How do I fix this.

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 1,141 Answers

Hey there
Let try this before you go to Rite Aid
this I took from the camera manual, so make sure you flow the steps
For Windows 98/me customers:
Please install camera drive before connecting.
1. Turn the camera and computer on, then connect the camera to the computer with the
included USB cable, and then slide the Function switch to ► (Playback Function). (I think this is very importent make sure you put the playback function)
2. “USB Mass Storage drive” appears on the computer screen.(if it doesn't pop up, go to "my computer" and look for "USB mass storage drive"

Hope will help more and let me know what's happening
Tom



Posted on Nov 06, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Get zoom error when turning camera on, also lens will not retact when camera is turned off.


Hello

The problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the probability is that you will have to get it fixed by a professional.

Use these at own risk as it may further damage the camera.

Firstly , try connecting your ac adapter or usb cable.

Try holding the shutter button while switching on the camera.

Look at the lens , and if some of the lens 'circles' is misaligned or not concentric then try wiggling it (while holding camera lens down).

Try gently pushing or pulling the lens when it extends but this is risky as it may cause the lens barrel to slip out of its guidance system.

Another way to do this is to place the camera lens down on a hard surface and then power it up. Be sure to use a soft cloth or something similar as to not scratch your lens or casing. Let the lens push the camera up and down a few times and sometimes the little resistance provided by the camera is enough to get things going again.

Try hitting your camera near the lens on the body with the soft tissue on the palm of your hand.

Other than that , I would take the camera to a repair center for a evaluation to see if it would cost more to repair than to replace the camera.

If it is still under warranty I would suggest you take it in before trying any of these steps and remove any off-brand batteries or accessories as some stores are really fussy about warranty repairs on camera's with non-brand accessories.

You can also have a look at THIS link.

Hope the advise is useful. please do not hesitate to let me know if you need any further assistance. Also, please be so kind to let me know if you found this helpful.

Regards
Andrea

Sep 27, 2010 | Fuji FinePix J12 Digital Camera

1 Answer

I have lost the disc i got with the camera to enable me


Hello, I Will Try My Best With The Best Of My Ability to help you solve your problems.....

1=Click on This Link And Go to the middle of the page http://www.nodevice.com/driver/download.html

2= Enter the correct verification code and Click "Download"

Enjoy!

Apr 18, 2009 | Canon PowerShot SD400 / IXUS 50 Digital...

1 Answer

Lost lens cap


http://www.bitssite.com/canon-powershot-pro-1/2827/rear-lens-cap/accessory.html
That should be the cap your looking for if not let me know. Please take a moment to rate my solution fixya if it helps.
Thank you,
Lee

Jan 04, 2009 | Canon PowerShot Pro1 Digital Camera

2 Answers

Lost c-370 olympus cam driver


go To www.olympusamerica.com click on link for software downloads and then click the link to get the free download for Olympus Master 2. This is the new version of the photo editing software that will support your camera.

Dec 11, 2008 | Olympus Camedia D-370 Digital Camera

1 Answer

Vivicam pc connection problem


buy another camra copy the sofwere cd an then return tha camra

Feb 06, 2008 | Vivitar ViviCam 55 Digital Camera

1 Answer

Memory Card for digital Camera


After inserting the card, go to my computer and see if it shows the memory card inserted. If so, click it and then when it opens, click copy to location and you choose the location, easiest, my documents and then my pictures.

Dec 26, 2007 | Cameras

1 Answer

I have lost my software for my camera, it's full and I can't figure out.


first, go to http://www.zdnet.com/ or similar shareware site and search and download a freeware photo viewer program. then, connect your camera to the PC by USB cable (the camera most likely has a mini-USB port). then open "My computer" and look for your newly-connected camera that may appear as a drive. double-click the drive to see your pic files. select one and open it with the freeware and print it to HP

May 27, 2007 | Largan Chameleon XP Digital Camera

Not finding what you are looking for?
VistaQuest VQ-5010 Digital Camera Logo

70 people viewed this question

Ask a Question

Usually answered in minutes!

Top VistaQuest Cameras Experts

kakima

Level 3 Expert

98792 Answers

sonic boom...
sonic boom...

Level 3 Expert

1557 Answers

Starnley Johnwells
Starnley Johnwells

Level 3 Expert

1029 Answers

Are you a VistaQuest Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...