Question about Sewing Machines

1 Answer

Singer model ce100 does not sew with pedal

Machine was bought new and never has sewn. tried to make it sew by calling singer to no avail. they have no support for this model in puerto rico.
checked sewing thread path and followed instructions in detail. machine does reverse but does not sew forward. lights indicate normal. could be pedal but replaced with other same model still does not sew. electrical is 120 volts. I was wondering if there is a problem with this model. have not tried to sew with computer since it does not sew at all.

Posted by on

  • hawaiilily Jan 04, 2009

    I have the same problem. I belive it is the pedal as well. Anyone have a solution or should I ship it to Singer?

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 110 Answers

Check your feed dogs. On the front, left at the bottom is a manaul switch. If you push it to the right it drops the feed dogs, for embroidery and when you push it left it lift the feed dogs. Just remember to turn the handwheel towards you after switching it to the left, until you hear a clicking sound and the feed dogs engage. Hope this solves your problem.

Posted on Nov 06, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

Broken electrical cord connector on singer ce100


Cecelia try going to this site http://www.singeronline.com/ I looked up the item you mentioned for the model you noted. Below is what I get for it. Shipping is Free so pretty good deal. Hope this helps!

http://www.singeronline.com/ce100.html
http://www.singeronline.com/sipoco81.html

Feb 05, 2015 | Singer CE-100 Futura Computerized Sewing...

1 Answer

My Singer Futura CE100 software will not work on my new computer with Windows 8. Singer does not have update yet. Any ideas on how I can get it to work. Thanks


My suggestion for now, have the earlier window version that you have been using for your CE100 also installed in your new computer.

Oct 13, 2013 | Singer CE-100 Futura Computerized Sewing...

1 Answer

Singer Futura CE100 will not work with windows 8. Singer has no solutions. Any ideas?


Suggest to also install the earlier windows version that can recognize your CE100 software into your computer.

Oct 13, 2013 | Singer CE-100 Futura Computerized Sewing...

1 Answer

Need foot pedal control for singer 766


try calling or email these sites and ask them about the part
sewvacdoctor.com
a1sewingmachines.com

Feb 10, 2013 | Singer Sewing Machines

1 Answer

Machine will not work on windows 7 64 bit computer will not load singer discs bought new computer old system was X P


First, there's a Windows 7 update available atwww.Futura-support.com. Click on the lefthand side, then on CE100/150/250/350,etc, etc. Follow the directions CAREFULLY. First, be sure the uninstall ALLFutura software you've attempted to install and reboot your PC.

If for some reason this doesn't solve you're problem, I've posted a set ofinstructions athttp://www.fixya.com/support/r8955271-use_machine_windows_7_or_vista that willallow you to run the software under XP on your Windows 7 machine. This is a bitmore complicated a solution, but if you follow the instructions carefully, youshould be fine. Try the Futura update first, though.

I hope this solves you're problem. Happy embroidery!

Apr 26, 2011 | Singer CE-100 Futura Computerized Sewing...

1 Answer

Singer futura ce200 software problem


You may ask your Singer supplier about Futura 2.5, this version of the software supports old machine models ce100/200, contains more features like the software for newer machine models and works under new OS including Windows 7.

Mar 22, 2010 | Singer CE-200 Quantum Futura Computerized...

1 Answer

I have the same problem, new machine, and I haven't sewn a stich.


Machines should be bought from local dealer who actually has a clue how to show someone to us it. Sorry for your problems but commonly they are operator error

Oct 14, 2008 | Singer 2732 Mechanical Sewing Machine

Not finding what you are looking for?
Sewing Machines Logo

Related Topics:

80 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sewing Machines Experts

Irene Tulloch

Level 2 Expert

458 Answers

yadayada
yadayada

Level 3 Expert

70347 Answers

kakima

Level 3 Expert

102366 Answers

Are you a Sewing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...