Question about Lite On LVC9006 DVD Player/VCR

1 Answer

I need a remote code for a lite-on LVC9006 so I can control my TV and my VCR -DVD combo with my satellite receiver remote. Any ideas ?

Posted by on

1 Answer

Re: I need a remote code for a lite-on LVC9006 so I can...

I've got a Lite-On DVD recorder and needed a code to sync it with my ARCHOS system. I found that the only code that corresponded with the 'ilo' products worked...

Posted on Dec 19, 2007

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

What is the code for a Panasonic tv/dvd/vhs combo.....

New 3 digit codes for DVD/VCR, DVR/SAT, TV/VCR, TV ...
DVD/VCR, DVR/SAT, TV/VCR, TV/DVD, DVR/CABLE and DVR/DVD combo codes for GE/Jasco three digit universal remote controls purchased after ... 3 digit codes for GE Universal remotes purchased after August 2002 ... PANASONIC, 437.

[PDF]Manufacture Code List

AT&TDVD VCR COMBO. VCR. HTIB. REC TUN. AMPLIFIER. TV. Abex 1098. Admiral ....Panasonic 1003, 1010, 1049, 1053, 1096, 1123, 1152, 1231, 1289,. 1292 ...

Remote Control Program Codes - FTC -

Jan 01, 2016 | Panasonic DVD & Blu-Ray Players

1 Answer

Need codes for Go.Video remote control

Go video remote for dvd/vcr recorder combo; you program TV by 2 digit codes. press TV power down when TV is powered on; and input 11 for JVC TV, or 03 for GE TV. You can experiment any two digit codes until TV shut down, then you have just finished programing n150b remote. This also work for all LG dvd/vcr combo recorder remote such as 6711RN203A..

Mar 08, 2010 | GoVideo Go Video DVD/VCR Combo

2 Answers

Is there a remote control code for model zv427mg9?

For my direct tv remote, 20675 worked for me :) magnavox zv427mg9 combo vcr, dvd

Sep 27, 2009 | Philips Magnavox MWR20V6 DVD Recorder/VCR

2 Answers

Would like to record from my tv to my magnavox dvd/vcr combo box

If I understand your request right, You do not have cable or satellite box.
You can not record from your TV. You use the TV as a monitor from the dvd/vcr combo box. What the box receives is what shows on the TV. So you will have to have a digital convertor hooked to the (antenna in) dvd/vcr combo box, (antenna out to the tv antenna in) Depending on the antenna you are using that is on the other end of your cable-in coax connection this will hook to your antenna in on the digital convertor box. If your cable is hooked up and operating correctly and directly to the tv that is digital ready you probabbly have a good picture. When the vhf/uhf signal was transmitted you could go from the dvd/vcr to the tv with no problem. But now that the signal is digital and the tv is set for digital the dvd/vcr will not pass a digital signal to the tv. Best suggestion, you have to get a digital dvd/vcr receiver. If you have more question please contact me.


Jul 25, 2009 | Philips Magnavox DVD/VCR Dual Player

1 Answer

I need the codes to ste the remote control; dish for a Panasonic TVCR Combination TV Ser

i need the code to program a panasonic tv/vcr combo using a dish remote control.

Aug 30, 2008 | Panasonic DMRES30V DVD Recorder/VCR Combo

1 Answer

Dish Pro record code for Mag combo

ZNREL, I've done this with Dish Pro before. Setup the Dish remote to control the Mag combo in the VCR position. Press the SAT button and select the guide. Go to the program in the guide and select it. The "record this program" routine should pop up, set it up. Here's the key, make sure the Dish remote has the VCR button selected and that the remote is placed where it can "see" the Mag combo. At the set time, the Dish remote will change the DishPro to the proper channel and then issue s "record" command via infrared to the Mag combo to start recording. DishNet has all of the device codes to their remotes downloadable from their site.

Mar 05, 2008 | Philips Magnavox DVD/VCR Dual Player

3 Answers

Lost remote, need to know what code number is

A universal will not allow you to do all the things the unit does,it will let turn on and off but the menu and settings might only be accesed with the original remote.Try this

Sep 24, 2006 | Lite On LVC9006 DVD Player/VCR

Not finding what you are looking for?
Lite On LVC9006 DVD Player/VCR Logo

Related Topics:

184 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lite On DVD & Blu-Ray Players Experts

Jaime Hernandez

Level 3 Expert

2267 Answers

The Knight
The Knight

Level 3 Expert

66644 Answers

Jazz Boyce
Jazz Boyce

Level 1 Expert

728 Answers

Are you a Lite On DVD and Blu-Ray Player Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides