Question about Bassett Mission Crib
Please help !
SOURCE: Bassett Crib
Call Bassett 1-276-629-6000 to obtain instructions and a parts list for model # 5926-0504 (look on the inside headboard - not the gold label).
Parts can be ordered from Products America 1-800-772-1041
Posted on Aug 03, 2008
SOURCE: bassett crib model no. 5068-1512
Try emailing the manufacturer directly for a manual at email@example.com or call
1-877-525-7070. Ask them to email it and maybe you can open the picture so it is not teeny tiny. Or ask them to mail you one. Faxing never seems to come through clearly.
The manufacturer should be able to assist you with any questions you have to put this crib together.
One helpful tip that I have - Put it together IN the baby's Room! Many 1st time parents like to put it together in the comfort of their livingrooms. It WILL NOT fit through doorways. This is a lesson you DO NOT want to learn the hard way. =)
Good Luck! from Moms Just Know
Posted on Oct 24, 2008
THE DIRECTIONS FOR BASSETT SOUTHHAMPTON CONVERTIBLE CRIB (model 5925-0521) ARE LOCATED *INSIDE* THE WARNING LABEL ON THE WIRE CRIB BASE. The warning label is an envelope that holds the direction packet. I was confused, too--I thought they hadn't included them with my crib! Hope that helps!
Posted on Jul 06, 2009
We have this crib as well. We bought it from Babys R' Us in 2005.
We also purchased the rails to convert it to a full sized bed. It did not come with instructions but I can explain to you how to put it together.
The rail conversion set should come with 2 pieces of wood that act as the bed frame. You do not need to purchase the extended frame. The set should also come with 4 long screws, the hex tool to tighten it and 4 metal pieces. You might also have some wood nail cover plugs.
Once you've taken apart your crib, the only pieces that you will need are the 2 longer pieces of the crib...the headboard and the footboard. The 2 shorter side pieces which served as a headboard and footboard as a crib and the metal grate to hold up the mattress can be put into storage.
On the sides of each of the new wood rails, you will see a circle indent on each end with a hole. You will insert one of the long screws into each and then insert it into the head board. You must use the special tool to screw/ tighten it in. The metal flat pieces can be inserted into it the circle befor eyou are done tightning so that it does not strip or damage the end of the circle. You do this with the other rail on the other end and then add the footboard using the same process. If you would like, I can send you a copy of what this looks like close up. ( the cricle indent with screws. The bed is extremely strong. We've all napt in it as a family along with our 2 large dogs. I highly recommend ordering the extra long/ tall bed rails from OneStepAhead for security because my son has rolled out of the bed and it is super tall!
Posted on Jul 18, 2009
Tips for a great answer:
Sep 03, 2008 | Childesigns Madison Crib
Apr 11, 2011 | Baby Gear
Aug 03, 2010 | Simmons Mattress Baby Gear
Nov 08, 2009 | Simplicity for Children 4 in 1 Ellis Honey...
Apr 24, 2009 | Simplicity for Children Lancaster 4 in 1...
Jan 11, 2009 | Delta Luv Delta - Baby Products 5-in-1...
Oct 30, 2008 | Bassett Parson Ridge Crib
Apr 18, 2008 | Simplicity for Children 4-in-1 Convertible...
405 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: