Question about Sony KP-46WT510 46" Rear Projection HDTV

1 Answer

Convergence issues I was hoping to get the parts list to repair the ICS on the KP-46WT510 projection TV. Thanks in advance for your help.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 42 Answers

The full downloadable service manual located Here! will have a list of all parts.
Below are a few remedies for convergence:

Subject

Poor convergence, IC8002

Symptoms / Customer Description
Customer hear a popping noise.
[Primary Symptom Code: 1436 ]

Solution

Found IC8002, IC8003, and fuse PS8006 defective on the D Board.

If you need repair assistance, go HERE!

Posted on Nov 16, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My sony tv model # KP-46WT510 the picture bows to the middle i tried fixing the convergence and it does nothing what else should i try


If the convergence feature did not fix the issue then you will need to install a convergence repair kit. Your model uses the Sony type 1 convergence repair kit which is available from www.tvrepairworld.com and includes the parts and the CD with instructions.

Aug 28, 2011 | Sony KP-46WT510 46" Rear Projection HDTV

3 Answers

Double photo


Replace both of your STK ICs STK392-110s use 150s Mats has Them 1-800-628-1118

Jun 02, 2010 | Sony KP-46WT510 46" Rear Projection HDTV

1 Answer

Problems with Sony KP-46WT510 46 in. Rear Projection HDTV. The Colors are not lined up correctly (Good in the middle of the TV and 2" off on the sides, top and bottom). What do I need to do to fix it?


Ur convergence is dead.U must know how to solders?Must replaced 2 convergnence ICS,and some or all it resistors.Tries Websites Tv repair World.com,Trepairkits.com to buy a convergence to repair it ur self.The shop will cost u $300 for parts and labors.

Mar 06, 2010 | Sony KP-46WT510 46" Rear Projection HDTV

2 Answers

I have a red shadow in 3d on sony KP-46WT510 TV.


Ur convergence is dead.Problems:Are 3D colors,colors misaligns,and colors out of focus.Know how to solders?Must change 2 convergence ICS,and some or all the resistors.Tries Websites Tv repair World.com,Tvrepairkits.com to buy a convergence kit to repair it ur self.The shop will cost u $300 for parts and labors.

Feb 17, 2010 | Sony KP-46WT510 46" Rear Projection HDTV

2 Answers

Where is the convergence chip located


Convergence out ICsare located on D Board of Sony KP-46WT510
These are 2 big ICs of black color mounted on silver heat sink.
Check out location of D board in TV in below exploded view...

a6eb8c9.jpg

Aug 03, 2009 | Sony KP-46WT510 46" Rear Projection HDTV

1 Answer

Convergence problem


you need to replace the convergence ICs, pico fusses and possibly a couple of the feed resistors. you can get the kit for your model at the following link which contains the parts and instructions.
http://servicemanuals.vstore.ca/product_info.php/pName/sony-kp46wt510-convergence-repair-kit/cName/convergence-repair-kits

Jan 28, 2009 | Sony KP-46WT510 46" Rear Projection HDTV

1 Answer

Sony KP-46wt510 convergence issue


you can get the repair manual at the following link under their sony category page two. They also have the Convergence ICs there are two of them both STK392-560 and you will also need about 4 of the 3.5 amp pico fuses, They also include free installation instructions with pictures for the ICs and free online tech support in case you need additional help during the repair. Heres the link.
http://servicemanuals.vstore.ca/

Oct 06, 2008 | Sony KP-46WT510 46" Rear Projection HDTV

1 Answer

Sony KP-46WT510 46 in. ic problem


If you can solder it should be an easy fix for about 50.00 You need two Convergence ICs STK392-560 the link I am posting has replacement ICs and provide free tech support by instant messageing as well as instalation instructions with pics on how to change the ICs. A repair shop will charge between 4 and 6 hundred to do the job which is about an hour. I would also suggest getting about 6 of the 4.7ohm 1/2watt resistors also as sony will sometimes blow a couple with the ICs but the repair tech will help you find the open one if there are any. Heres the link to the site.
http://servicemanuals.vstore.ca/

May 23, 2008 | Sony KP-46WT510 46" Rear Projection HDTV

2 Answers

Kp-46wt510


you need to replace both convergence ICs they are easy to install. You need two STK392-560 ICs you can get them at the following link and they provide free installation instructions as well as free online messaging with a repair tech while youre donig the repair. It takes about 45 minutes to do the repair and you will save about 400.00 by doing it yourself. Heres the link I am one of thier repair/support techs. This is a very easy repair.
http://servicemanuals.vstore.ca/
just click on the convergence IC catagory and you will see the STK numbers that you need.

Apr 11, 2008 | Sony KP-46WT510 46" Rear Projection HDTV

7 Answers

The red convergence is off


replace the convergence ICs post your model and I will post a link where you can get the parts and they include step by step instructions with pictures so you can do the repair yourself takes an hour and will save you about a 400 dollar repair bill.

Mar 30, 2008 | Sony KP-46WT510 46" Rear Projection HDTV

Not finding what you are looking for?
Sony KP-46WT510 46" Rear Projection HDTV Logo

Related Topics:

90 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sony Projection Televisions Experts

Steve Sweetleaf
Steve Sweetleaf

Level 3 Expert

1128 Answers

Ap12
Ap12

Level 2 Expert

103 Answers

Jason Harris
Jason Harris

Level 2 Expert

256 Answers

Are you a Sony Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...