I put in the wrong password (3 times) while trying to login to the CDE on a mitel 200ML. Now the modem answers but I cannot get a prompt (or any response for that matter). The last time this happened, I had to reboot the system. It seems line there should be a way to re-enable this without a reboot. Any sugestions? Thanks!
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Depends on what type of phone switch you have the phone connected to. The 3300 and 200 have a feature code you can program. On the 200 I believe the default code was ###. So what model phone system do you have?
Are you referring to the auto attendant greetings? Depends on your phone system and extension digits... On the Mitel 200 and 3300 mailbox 999 for 3 digit extensions and 9999 for four digit extensions... So if your extensions are 201,202,203... Try 999...and default is 8642. If I remember correctly.
You will need your system administrator to change the call reroute assignment of your phone, or you have call forwarding active to a location the system can not route a call to. Either scenario your phone administrator can resolve quite easily.