Question about StarTech.com StarView SV211K 2-port KVM Switch
I cannot get any channels on my starveiw box super 3
press 1570. this takes you into secret menu
Hit ok on nagravision
and change both keys 0, and key 1
Make sure your cable provider is listed at top N** or t******t ect
To change between the 2 keys
highlight key number press right and left
When key changed hit ok (To store) after each one..
(YOU MUST SAVE EACH KEY INDIVIDUALLY - I.E. AFTER CHANGING KEY 00 MAKE SURE YOU STORE BEFORE CHANGING KEY 01 (TO STORE PRESS OK)
3F 32 37 03 D0 73 84 84
C6 64 1D EF 47 5A 0E EF
the latest keys 1/12/2008
If done full factory reset/scan dont forget to turn on EMU
>> DO NOT PRESS SET DEFAULT KEY OR WILL RESET KEY CHANGE ABOVE <<
Now exit and all channels ok
On the starview remote:
Pause button = Letter A
Audio button(next to pause!) = B
Red(sub) button = C
Green(next to Red!) = D
Yellow = E
Blue = F
To enter numbers use the numbers on the remote 0-9.
To move left or right use the navigation buttons left and right.
To confirm press ok.
Posted on Dec 01, 2008
Has any one got any information for putting codes in starview 3 super
Posted on Nov 29, 2008
SOURCE: STARVEIW 3, BOX SUPER. REBOOTS.
I've checked around a bit and apparently this is a manufacturing defect.
You can contact StarTech at www.startech.com/support/ or
Posted on Jun 15, 2008
Tips for a great answer:
Sep 16, 2010 | StarTech.com StarView SV211K 2-port KVM...
Feb 23, 2010 | StarTech.com StarView SV431USB 4-port KVM...
May 05, 2009 | StarTech.com StarView SV211K 2-port KVM...
Dec 03, 2008 | StarTech.com StarView SV211K 2-port KVM...
366 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: