Question about Belkin 802.11g Wireless Desktop Network Card [ F5D7000 Wireless ] (109061)

1 Answer

Reply thanks for your help. but i'm going to take it back when i tried to install it i lost my internet connection completley and i had to restore my conputer to a previous time. it also made the computer work very slowly. had enough so returning it. but thanks again

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 113 Answers

Don worry kelly everything ll be alright, ur always welcome
partha

Posted on Nov 05, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Acquiring network address xp


You must have at least the date right and the time otherwise you get this response. Set the time and date on your computer to solve this issue. Let me know if this works.

Dec 05, 2013 | Belkin (F5D7000) 802.11g/b Wireless...

1 Answer

Hi, I am trying to install D-Link router WBR-1310 but getting the error code 101 IP address not maching. What do you suggest?


Use the PING command to test the communication between the computer and the gateway.

Goto Start > Run and enter COMMAND.
From the Command Prompt, enter PING 192.168.0.1.
The gateway should reply.

Verify that the residential gateway is getting power. With the broadband modem connected to the WAN port on the gateway, you should have a soild WAN link light. You should use the same cable that connected the modem to the PC to connect the modem to the WAN port on the gateway. Any port on the gateway that has a computer connected to it should have the corresponding LAN link light lit. If you do not get the appropriate link lights, try using different cables.

onfigure browser/Internet Options
Step 1 Go to Start > Settings > Control Panel.

Step 2 Double-click the Internet Options icon.

Step 3 On the Security tab click Restore the default security level.

Step 4 Click the Connection tab and set the dial-up option to Never Dial a Connection.

Step 5 Click LAN Settings. Nothing should be checked. If anything is checked, uncheck it. Click OK.

Step 6 Click the Advanced tab and then click Restore these settings to their defaults.

Step 7 Click OK.

Step 1 Turn the Cable/DSL modem off.

Step 2 Turn the D-Link router off.

Step 3 Wait 60 seconds.

Step 4 Turn the cable/DSL modem back on and wait until all the lights are steady.

Step 5 Turn the D-Link router on.

Most routers and modems do not have an on/off switch. Simply unplug the power. Unplugging the power will not reset (reset back to default settings) the unit.

Nov 09, 2010 | D-Link 802.11g Wireless Router WBR-1310...

1 Answer

Belkin adapter f6d4050 not connecting to internet


| |the belkin adapter connects to the airport express router | | sounds like the adapter driver has installed all OK if you have connection to the router. Therefore something is blocking access on your PC - the most common thing is a firewall. to test if you do have access to the internet can you do the following:-------start>run{vista/7 search box}>CMD>ping google.com ----- see if you get a reply message sent 4 times - if you do then you do have access to internet - if you do not get a reply do this ping 209.191.93.53 ------ if you get a reply from this number BUT not from the name then its a DNS issue. ------------ assuming that you get a reply from both , then I suspect its a firewall blocking, disable the firewall, now firewalls such as Norton, Mcafee etc can cause issues even if you think you have removed them in the past , or a subscription has expired. to remove these firewalls i would suggest you use a removal tool which is available at most of the manufacturers website - if you reply with a comment on what you have I can post the link now if its a dns issue try the following ---------- start>run{vista/7 search box}>CMD>ipconfig /dnsflush -------- if that does not work - then you could try a public DNS like google public DNS here http://code.google.com/speed/public-dns/ the link also shows you how to configure your PC - if that works then post a comment back and we can see if we can get it working on the correct dns servers from your isp

Mar 15, 2010 | Network & Wireless Adapters

1 Answer

Lost internet service on laptop


First, are you wired or wirelessly connected to the router? Is there any computer that is connected to the router aside from the problem one?

If you are wired connected to the router, try connecting the Ethernet cable into different LAN port of the router.

If you are wirelessly connected to the router, try disabling and re-enabling the WiFi of your laptop and try connecting again.

If there's another computer that's connected to the router and it can get online, then the problem is in your computer. Checked the Network properties of the problem computer and make sure that you are getting a valid IP address.

If you have two computers and both of them are not getting online, try connecting first one of the computers directly to the modem. If same problem occur, then contact your ISP.

If you can get online while directly connected to the modem, then turn the Netgear router OFF for about a minute and turn it back on and try again.

Hope this helps and have a good day!

Nov 29, 2009 | Network & Wireless Adapters

1 Answer

Trendnet TEW-423PI wireless PCI adater


Hi Martin,
with all what you say, it looks like that your hardware is ok. That's a good start.
There are several possibilities what can be wrong: either your modem is not configured correctly, or some of the setting in your computer are not right.
Let's start with the computer:
1. open a command prompt (WindowsKey+R), type "cmd" and hit "Enter".
2. In the following window type "ipconfig /all" (there is a space before the "/").
3. Your output should look similar to mine:

Ethernet adapter Wireless Network Connection:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Intel(R) PRO/Wireless 3945ABG Network Connection
Physical Address. . . . . . . . . : XX-XX-XX-XX-XX
Dhcp Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . : Yes
IP Address. . . . . . . . . . . . : 192.168.2.xxx
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.2.1
DHCP Server . . . . . . . . . . . : 192.168.2.1
DNS Servers . . . . . . . . . . . : 192.168.2.1
Lease Obtained. . . . . . . . . . : Friday, August 07, 2009 17:32:33
Lease Expires . . . . . . . . . . : Saturday, August 08, 2009 17:32:33


Since the default IP address of your modem is 192.168.2.1, you IP address has to be in that range: 192.168.2.2-254.
If your IP address starts with 169.xxx.xxx.xxx or is 0.0.0.0, you have a connectivity problem. (Let me know and post your output here, if that's the case.)

Now type in that command prompt "ping 192.168.2.1" and hit "Enter" - replace the numbers with what you see under your Default Gateway.
My result looks like this:

Pinging 192.168.2.1 with 32 bytes of data:

Reply from 192.168.2.1: bytes=32 time<1ms TTL=64
Reply from 192.168.2.1: bytes=32 time<1ms TTL=64
Reply from 192.168.2.1: bytes=32 time<1ms TTL=64
Reply from 192.168.2.1: bytes=32 time<1ms TTL=64

Ping statistics for 192.168.2.1:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 0ms, Maximum = 0ms, Average = 0ms


This shows that you can connect to your modem. If you get a "Request timed out." reply, then your computer can not connect to your modem. Also, let me know if that's the case.

Now go back to the command prompt and type "ping www.google.com" and hit "Enter". My result looks like this:

Pinging www.l.google.com [74.125.65.99] with 32 bytes of data:

Reply from 74.125.65.99: bytes=32 time=87ms TTL=50
Reply from 74.125.65.99: bytes=32 time=85ms TTL=50
Reply from 74.125.65.99: bytes=32 time=87ms TTL=50
Reply from 74.125.65.99: bytes=32 time=87ms TTL=50

Ping statistics for 74.125.65.99:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 85ms, Maximum = 87ms, Average = 86ms


This shows two things:
  1. You can get to the outside world
  2. DNS is working properly
Now copy the IP address returned by this command (74.125.65.99 in my case) and copy it into the URL bar of your browser. If google shows up, then you have a DNS problem. What that means is that the translation from web addresses (www.google.com) to IP address (74.125.65.99) is not working. Go back and check you entry for DNS servers in ipconfig / all. Is that number identical to your Default Gateway?

How to set up DNS manually:

  1. Click on start
  2. Go to control panel
  3. If your control panel is in classic view click on Network Connections
  4. Right click on your Wireless network icon
  5. Click Properties
  6. Select Internet Protocol(TCP/IP)
  7. Click on the Properties button
  8. Now select the following option: "Use the following DNS server address"
  9. Under "Preferred DNS server address" enter 208.67.222.222
  10. Under "Alternate DNS address" enter 208.67.220.220
  11. Click on OK until all windows are closed
Some points on your modem:
  1. If you don't have a manual, you can get it here.
  2. Make sure you have entered your user credentials for Bell (see page 11 in the manual)
Ok - sorry for the long post, but I tried to catch all culprits. If there is anything you don' t understand or it is still not working, let me know - I'm happy to help. If the outputs form the command prompt look very different from mine, copy them and post them here.

Easy way to do that? - Go back to your command prompt.
  1. Type ipconfig /all > C: ixya.txt (hit ENTER)
  2. Type ping 192.168.2.1 >> C: ixya.txt (hit ENTER)
  3. Type ping www.google.com >> C: ixya.txt (hit ENTER)
  4. Open My Computer, go to your C: drive and you will find a text file called fixya or fixya.txt, which contains all the information.
  5. Come back here and paste the information in a comment.
Let me know if this was helpful and what you found out!

Dante

Aug 08, 2009 | Trendware TRENDNET TEW-423PI Wireless...

1 Answer

Cannot connect to wireless internet


go to run and type cmd.When a screen pops up type " ping www.google.com" , omiting these quotes and press enter.If you get something back which says things like ttl etc..then you have an internet connection..If you get a negative reply then you know you definitely have no connection.Try to reset your wireless connection and check if your firewall is stoping you..Also try on cmd prompt " ipconfig/all "..Check the results on google and maybe this could be helpful as well, on cmd prompt, type " ipconfig / iprenew" and press enter..Then when you are back at a blinking cursor then type " ipconfig / iprelease...Try these and if does not help then you should also consider rebooting the pc and restarting windows wireless configuration..(Google it and you will be fine)

Jun 14, 2009 | Toshiba (PA3064U-1PCC) 802.11b Wireless...

1 Answer

USB wireless internet adapter disconnecting


Sounds like the usb ports are sharing an I/O channel. So when you unplug one usb device the CPU is being told that the USB port is not being used.....Maybe..... To test this, hardwire into a data cable and plug in different devices, next unplug a devise and see what happens. If you stay connected you may have found your answer. Unfortunately I don’t think a reimage or restore will fix the problem. If you get the same result try a reimage of your OS. Good luck.

Again sound like a mother board issue.

Questions to ask, When did I notice the problem (Maybe able to restore to the point the problem started.) and did I install new software or hardware when this happened?


Good Luck

Apr 05, 2009 | NetGear WPN111 RangeMax Wireless USB 2.0...

1 Answer

I need passphrase and WEP Key 1 for a Linksys Wireless-G Adapter model #WPC54G.


do one thing install the driver of the router card in ur note book by cd is give with the card.after install the driver card restart the notebook then you get the icon in taskbar wireless signal.then after go to linksys router first go the network place right cilk propersities after that u see the local area connection right cilk properties then go for tcp/ip protocol then properties after that u give the ip address 192.168.1.50 and subnet mask is 255.255.255.0 aND DEFAULT GATWAY IS 192.168.1.1 THEN GIVE OK OK OK. then go start >run>type ping 192.168.1.1 then enter after that u show the black screen in that given reply or request time out.if the reply is came then go to internet exlporer in address bar type 192.168.1.1 then enter asking user name and password then give usermane admin and password is admin after then go wireless cilk it then enable the wireless in that you can give the wep key also.

Jun 01, 2008 | Linksys WPC54G Wireless-G Notebook Adapter...

1 Answer

Linksys Wireless-N USB Network Adapter WUSB300N Drivers


Hello, Click start, right click my computer, click manage. From there click device manager. This will list all installed devices including sound. Right click sound device and Click Update driver. Follow instructions. Reboot computer. If this doesn't work, get manufacture and part numbers off sound card. Go to manufacture web site and do a search for card number and download driver. Hope this helps

Mar 23, 2008 | Network & Wireless Adapters

Not finding what you are looking for?
Belkin 802.11g Wireless Desktop Network Card [ F5D7000 Wireless ] (109061) Logo

Related Topics:

28 people viewed this question

Ask a Question

Usually answered in minutes!

Top Belkin Network & Wireless Adapters Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18299 Answers

Gareth Cockram
Gareth Cockram

Level 3 Expert

657 Answers

isaac johny
isaac johny

Level 3 Expert

796 Answers

Are you a Belkin Network and Wireless Adapter Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...