Question about Computers & Internet

1 Answer

Toshiba a210 will not turn on, f2 f12 do nothing, my granddaughter has done something, it has not been on for a month and the purple line is not full can you help

Posted by on

  • 2 more comments 
  • vandao Nov 05, 2008

    if i am paying for this i'm very disappointed

  • vandao Nov 05, 2008

    it is a lap top, i get as far as Toshiba page f2 f12, and no further i did say this the power is on, i have removed battery and replaced it but just the same



    vanda

  • vandao Nov 05, 2008

    sorry inapropiate because i have a lap top & i payed £9 to someone

    vanda

  • vandao Nov 05, 2008

    i payed £9 pound, but probabley you dont get it sorry

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,124 Answers

Hit the button power located on the cpu tower

Posted on Nov 05, 2008

  • 1 more comment 
  • Pablo Csaky
    Pablo Csaky Nov 05, 2008

    You said that your computer is not Turn it ON and after that you said that you are hitting F12.

    Hitting F12 will NOT turn your computer ON.
    You must hit POWER

    If after that your computer is not working the problem could be related to a power supply.
    Check on the back of your computer is the fan is working, also check inside if the cpu fan is working.
    If not you have to replace your power supply.

    Why are you rating my help as innapropiate since I'm trying to help you for free?
    Please explain or change my rate

    Thank you

  • Pablo Csaky
    Pablo Csaky Nov 05, 2008

    You are not paying to me for this help!!!

  • Pablo Csaky
    Pablo Csaky Nov 05, 2008

    First of all you put the question like a Desktop instead a Laptop (that's is not my fault)



    to get into your BIOS on Toshiba do this



    Toshiba Laptops: - Toshiba Utility
    Toshiba: - Press Esc during boot
    Toshiba, Phoenix, late model PS/1 Value Point and 330s: - Press F1 during boot



    PLEASE REMOVE THE INNAPROPIATE RATE!

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

HOW TO CONNECT BACK TO THE INTERNET


click my computer/ control panel/ performance and maintenance/ system restore top left/ next/ pick day on calender/ next/ yes, except, whatever will restore to previous date no work lost. very good to get rid of viruses too. hope this works for you.

Mar 20, 2013 | Computers & Internet

2 Answers

Hello, I went into my bios settings and did something wrong now when I start up my computer it takes me to the mi bios megatrend screen at the bottom of the screen says driver bad press f2 to resume f1...


go back into the BIOS by pressing F12 and look for the set BIOS to default values or something along those line. save those settings and reboot..

Please give feedback...

Dec 18, 2012 | Lenovo Computers & Internet

1 Answer

System won't boot up window XP


HI Joe. It's likely you have a virus. Or could be just a corrupted section of the hard drive. The F8 is what gets you to the black screen with the differnt boot options. F2 or Del button gets you in the the BIOS or start up instrutions for the PC. F 12 will get you boot device options. The F12 or F2 needs to be pressed before it ever gets to try starting windows. So when you first power on, immediately start tapping the F12 about once a second. This should bring up a menu of which items/ device, to start from. [If you get a stuck key message just clear it and continue tapping F12 or start over] I would suggest you use the windos CD and choose the CD device to boot from, then it will recognize the CD drive. You could follow the CD start up options to peform a repair of windows. If you do a repair, then you should also perform a virus scan immediately after. If after all that, you still have issues, then it's likely the hard drive itself is bad or going bad and you should look at replaceing it. Good luck.

Dec 05, 2012 | Dell Dimension 8200 PC Desktop

1 Answer

I have a dell 3100 when I turn it on all it says is setup press f2 and boot disc prees f12 but nothing happens when i press f2 or f12


your windows is corrupted. please install your windows again. an if you don't want to loose your personal data,then only format the "c" drive of your computer. remember only local drive 'c'.
THANK YOU

Oct 11, 2009 | Dell Dimension 3100 PC Desktop

2 Answers

I have a toshiba p205d-s7436 when you turn the laptop on a black sceen reads toshiba leading innovation i tryed putting recovery discs in will not reboot tryed f12 and f2 it will not boot up PLEASE ANY...


The first step is to check the BIOS to see if your hard drive is listed. If so, is it set to be the first boot device. To enter the BIOS, use the F2 option when prompted.

If the hard drive is not present, it's either come loose, or the drive's controller has failed.

Also, if you can use the F12 option to boot to a CD/DVD drive, use another computer to download the Ultimate Boot CD iso from http://ultimatebootcd.com, and then burn it to a CD. This will create a bootable diagnostic CD that you can use to run diagnostics of your hard drive.

Let me know how this works for you.

Sincerely,
James O'Brien

Oct 04, 2009 | Toshiba Computers & Internet

1 Answer

My laptop freezes on the main start screen


enter to bios set up then disable the f1 and f2

May 01, 2009 | Computers & Internet

1 Answer

Grey screen with white line on my laptop


I took the battery out then put it back in and it works fine now.

Apr 28, 2009 | Computers & Internet

2 Answers

Windows XP won't boot


sorry for my bad english

the problem may be your hardisk data cable.change your hardisk data cable.and also try this, remove ram memory and clean it and restore.  

Dec 16, 2008 | Dell Dimension 3100 PC Desktop

1 Answer

I have a toshiba a135-s2376 laptop i first booted this computer 45 mins ago it would not i waited and then f2 f12,at lower left hand corner appeared it just sat did nothing so i hit f2 it took awhile for...


press F12 , F2 or DEL key for enter in bios setup.
detect your harddisk .if not then try to disable sata and save settings then start the pc.
also u can try to put awa CMOS cell for 15 minutes to reset your bios settings it is in back side of your laptop.

Oct 14, 2008 | Computers & Internet

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

109 people viewed this question

Ask a Question

Usually answered in minutes!

Top Computers & Internet Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

kakima

Level 3 Expert

98879 Answers

David Payne
David Payne

Level 3 Expert

14089 Answers

Are you a Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...