Question about Hotpoint Aquarius WD640 Front Load Washer/Dryer

1 Answer

Not drying hotpoint washer/dryer model wd440 TUMBLE DRYER NOT WORKING

Posted by on

  • 2 more comments 
  • tashmike Dec 08, 2008

    mine doesn't flash any anything it gets hot but not hot enough to dry its taking 6 hours to dry one vest for my baby

  • Anonymous Dec 28, 2008

    When dryer switched on, after a minute, on/off switch light starts flashing, then drying high heat, time saver and reduce creases buttons also start flashing. Drying programme stops.

  • jo_trinder Feb 07, 2009

    There is no heat, although the programme works. It is also not so silent anymore.

  • Barry Coates
    Barry Coates May 11, 2010

    Several reasons for this, does it show any flashing lights or error code numbers?

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Vice President:

    An expert whose answer gotĀ voted for 100 times.

    Sniper:

    An expert who has posted more than 50 answers, of which 90% or more were rated as helpful.

  • Expert
  • 100 Answers

The steam gets condensed back to water and pumped away so sometimes draining problems cause poor drying. is the machine plumbed in according to handbook?
also your dryer filter may be blocked but this is not accesable without the dryer box being stripped down.

Posted on Feb 06, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My Hotpoint Aquarius WD440 smells of hot rubber when it is on the M (drying) programme and the clothes come out smelling of rubber. Can you tell me why this is happening. Everything is working fine...


Hotp[oint Aquarius WD440 washer /dryer - Has a distinct smell from clothes when washed like stagnant water is lying somewhere in the machine, It has all benn stripped down but cannot find anything wrong. Whats the solution????

Aug 11, 2011 | Hotpoint Aquarius WD63 Front Load...

2 Answers

Hotpoint aquarius wd440. Flashing lights


press and hold on off button till the display panel lights up.Then press and hold the on/off button and the start /cancel button together.You will now reset the washing machine settings.And just pick your cycle again

Oct 04, 2009 | Hotpoint Aquarius WD63 Front Load...

1 Answer

Hotpoint washer dryer lights flashing


Check first the thermal fuse.

Test heating element to ensure is not grounded, and staying always on. Test the fan and ventilation system.

If you find no fault in there , then test the timer control board.

Enter the model number on one of two websites below to get parts and diagrams for your appliance:


Appliance Parts From PartSelect

Appliance Parts Pros

Apr 23, 2009 | Hotpoint Ariston Aquarius WD420 Front Load...

1 Answer

Hotpoint wd440 heating but not drying


yes, the dryer is pants im afraid. weve had ours going on 4 years & it has broke down every 6-10months - seriously! the dryer will leave clothes hot & steamy but when hung up for 1/4hr they r dry! _ Hotpoint advised us that he machine is esigned his way - but dont believe a word from their corporate b***hit mouths!

Aug 11, 2008 | Hotpoint Aquarius WD640 Front Load...

2 Answers

Hot point WD440 wash/dry :How to put tumble spin off.


i know this may sound stupid but did you follow the instructions on removing the Transit Braket? with tht un removed it will cause the machine to "Dance" around the room

Jan 09, 2008 | Hotpoint Aquarius WD640 Front Load...

2 Answers

Not drying


Is it still under warranty? I've read that these machines are better left at the retailer...

Dec 08, 2007 | Hotpoint Aquarius WD640 Front Load...

2 Answers

Not drying


if you hav'nt fixed it try the element in the dryer unit on the top of the drum check it for continuity have you any flashing lights

Nov 19, 2007 | Hotpoint Ultima WD72 Front Load...

1 Answer

WD440 programme m


This sounds like a faulty pcb and/or inlet valve. see links for prices.

meatballs77 - If you have warranty (the machine is less than 1 year old which yours is) or paid for extended cover then call hotpoint to replace... Hotpoint should be able to fix this - this should be free. call 0870 4422 510

Rememer parts are free up to five years - but there is a £90 callout fee after the first year.(unless you extend the full warranty)

Nov 07, 2007 | Hotpoint Aquarius WD63 Front Load...

Not finding what you are looking for?
Hotpoint Aquarius WD640 Front Load Washer/Dryer Logo

494 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hotpoint Washing Machines Experts

hungoverrr

Level 1 Expert

5 Answers

puggy666

Level 1 Expert

47 Answers

gbob59

Level 3 Expert

2963 Answers

Are you a Hotpoint Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...