Question about Kenmore 24032\24036 Top Load Washer

1 Answer

Agitate/Spin Issues (again)

My Kenmore 70 series was not agitating or spinning and, as suggested, I replaced the motor coupler. That did the trick for a month, up until now. Tonight it is barely agitating and not spinning at all. Is it time for a new machine?

Posted by on

  • marionharley Nov 08, 2008

    i have the same problem

  • jaydeegee413 Mar 23, 2009

    My Kenmore Elite Top Load Washer 110-20592-992 had a bad motor coupling and was replaced about a month ago. Now the machine fails to agitate, doesn't spin but drains, and when I shut the top of the machine, I hear a loud thud. The sound resembles a metal ball dropping. Any help would be appreciated.

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 63 Answers

If your coupler is good change your agitator dogs that will fix slow wash and clutch on top of transmission or lid switch for no spin

Posted on Nov 12, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have an Kenmore 70 series washer. It would not Spin or Agiate so after looking to the internent for help I found it may be the washer coupling. I replaced this part, but now it won't spin, agitate or...


This assumes that you have a basic Kenmore / Whirlpool top load, direct drive, neutral drain (it doesn't spin until the pump removes most of the water) machine.

First, see the Sears parts site for your washer:

http://www.searspartsdirect.com/partsdirect/index.action

Enter your model number (###.########) and you'll see a list of major sub-components with diagrams and parts.

Also see the Whirlpool / Kenmore Service manual for top load, direct drive washers:

https://secured.whirlpool.com/Service/SrvTechAdm.nsf/2cd44500d572193285256a45004fd9d6/f7e2147fa98b28cf85257122007475cb/$FILE/L-55.pdf

Are you sure that you plugged the Lid Switch back in when you put the cabinet back on??

If the switch is connected, I'd also pull the cabinet again and make sure that the Motor coupler is installed correctly. If it isn't, it could be broken again and the washer wouldn't agitate or spin.

Are you sure you connected the motor?

Jan 19, 2011 | Kenmore Washing Machines

2 Answers

Kenmore series 70 washer will only fill with water.


I recently had this problem. It was found that the main drive belt broke and the washer would fill but not spin, agitate or drain. I replaced the belt and everything worked again. A defective or disconnected cover switch would also cause the same problem.

Jun 30, 2009 | Kenmore Washing Machines

2 Answers

Won't spin won't agitate


http://www.repairclinic.com/Appliance-Parts?s=t-110.24722300-%3d%3d

This is a link showing the part I suspect needs replacing in your washer. It's the motor coupler -- when it breaks, nothing turns but the motor itself.

May 06, 2009 | Washing Machines

2 Answers

Kenmore 28731 top load washer


You will need to replace the motor coupling. Here is a video to show you how to do it.

Oct 24, 2008 | Kenmore 23822 Top Load Washer

1 Answer

Series 70 Kenmore Washer Won't Agitate or Spin


baseball, sounds like a broken coupler, check out this post and post back, Catriver http://www.fixya.com/support/t144580-kenmore_8series_washer

Apr 26, 2007 | Kenmore 22422 Top Load Washer

Not finding what you are looking for?
Kenmore 24032\24036 Top Load Washer Logo

305 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenmore Washing Machines Experts

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Jesus  Colon
Jesus Colon

Level 1 Expert

12 Answers

Fred Sops

Level 2 Expert

271 Answers

Are you a Kenmore Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...