Question about Computers & Internet

Open Question

Good morning,I have just brought an LG internal super multi DVD rewriter securdisc with lightscribe but did not get the solution cd with it, is there anything you can do? Jason keogh jason.keogh1@hotmail.com

Posted by on

5 Suggested Answers

agnelkj
  • 210 Answers

SOURCE: Computer won't recognize new GSA-H55L

hi,

try this...

> click on start--> run
> type in devmgmt.msc
> expand dvd or cd rom drives
> check whether your dvd rom is listed
> if so right click on that and select properties.
> check whether it is enabled or not.
> if that is ok, close everything
> open control panel--> add/remove hardware
> search for your dvd rom

let me know what is the result

thanks and regards
agnel

Posted on Mar 17, 2008

ithana
  • 185 Answers

SOURCE: lg 20x external super multi dvd rewriter

hi check the port and then connect it



dnt forget to rate me

Posted on Apr 21, 2009

  • 400 Answers

SOURCE: i need software external super multi dvd rewriter GSA-E50L , can you help me please?

What is the software for?
If you want to record CDs and DVDs then you need Nero or Sonic record now.
windowsXP has a built in CD recording program butnot for DVDs
Windows Vista can record CDs and DVDs but neither operating systems program can copy CDs.

Posted on May 06, 2009

SOURCE: lightscribe dvd/cd super multi drive electing all by itself.

It may be a hardware problem. If it starts ejecting as soon as you switch on the system i.e. before booting into the operating system then it is definitely a hardware problem. Take the drive to the service centre and get it fixed. Or if it happens when you are using windows then it might be a prank program or a virus. Check your running processes and make sure all are right. (You can google the process name and check the results)

Posted on May 20, 2009

  • 3940 Answers

SOURCE: how do i hook up lg/gh22 super multi dvd rewriter

The drive you are installing is a SATA drive. The system came with a PARALLEL ATA or PATA optical drive, The motherboard has a SATA controller and the HDD is a SATA drive. So you need a SATA data cable and connect it to the SATA 1 port on the motherboard. There should be a SATA power connection inside the chassis that is not being used, that you can connect to the drive. Then go to system setup (F2 at boot) enable the SATA 1 controller and disable the PATA controller
http://support.dell.com/support/edocs/systems/dim3100/en/sm/parts0.htm#wp1043338

Posted on Oct 05, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Install LG 22x DVD internal Super Multi DVD Rewriter. Dell says no provision for writer, use external hard drive. LG says compatiable. May not be updating system. May not be putting jumpers on correctly.


Change the jumper to either cable or slave if not on a separate cable if it is separate you can use the master jumper. It will read secondary master. Or it will read secondary slave. Check that out make sure if on the same cable of the hard drive it needs to be a slave. Please post a comment if this assisted you. Thanks for using FixYa! John

Feb 21, 2011 | Dell Dimension 3000 PC Desktop

2 Answers

I have upgraded from windows Vista to windows 7 and now it will not recoginze my Internal/GH 22 super Multi DVD rewriter 22X? So I cannot play cds or dvds at all.


Do you have a drivers disk for the DVD player that has windows 7 drivers on it or is that version of windows 64 bit and the is no driver for that DVD player.

Feb 05, 2011 | Acer Computers & Internet

1 Answer

CD/DVD Drive will not read cd cd/rw or dvd/rw's


Goto the web site of the company that makes the writer and reinstall or update the internal Firmware for that model of writer.

Jul 02, 2009 | Computers & Internet

1 Answer

Lightscribe dvd/cd super multi drive electing all by itself.


It may be a hardware problem. If it starts ejecting as soon as you switch on the system i.e. before booting into the operating system then it is definitely a hardware problem. Take the drive to the service centre and get it fixed. Or if it happens when you are using windows then it might be a prank program or a virus. Check your running processes and make sure all are right. (You can google the process name and check the results)

May 18, 2009 | HP Computers & Internet

1 Answer

Lg 20x external super multi dvd rewriter


hi check the port and then connect it



dnt forget to rate me

Apr 21, 2009 | Computers & Internet

1 Answer

Problem with new dvd rewriter


Buy another IDE cable(if you didnt get one with the drive) and keeping the rewriter on master plug it in the secondary IDE channel on the motherboard.

So the config should be like this:
Primary IDE connector on the mobo (useually blue/black) connected to hdd set to master at the cable end
Secondary IDE connector on the mobo connected with a seperate cable (80 pin cable for high speed preferrably) to the rewritable set to master at cable end

Cheers
rate if its fixed

Feb 18, 2009 | Compaq Computers & Internet

1 Answer

LG super multi drive identified as CDROM by Windows XP


First, thank you for the excellent description. I wish more FixYa clients would provide complete information like that.

Unless you are having problems, I wouldn't worry about the product designation in XP since it's LG drive that is identifying it as such during XP's device discovery routine. Your new LG drive can handle all of the different DVD rewritable formats - i.e. DVD-RAM, DVD+RW, and DVD-RW - so it appears that it is just using the first as its designator.

In my laptop, my LG DVD writer is designated as follows in Device Manager:

HL-DT-ST DVDRAM GSA-T10N ATA Device


LG describes it as a "Slim DVD Super-Multi Drive". I've had no problems with it, and it has worked flawlessly to burn CDs and DVDs.

Jul 19, 2008 | Computers & Internet

1 Answer

I can't read CD on my computer anymore so I can't instal my LG 18x Externall Super Multi DVD Rewriter


first turn off your pc then you sec your cdrom power cable is plug in or data cableare properly conected to the mainboard ide socket if eaverything is parfectly then you power on your pc and sec cd rom eaject batton push it if tray open then you put your instollation disk and close it. if the cd rom not reading instollation disk then you seour that your cd rom pickup or lans is bad or damage. replace your cd rom or put your instollation disk other computer and copy your assential file in to a usb pen drive and transfer your pc.

Jul 16, 2008 | Computers & Internet

1 Answer

NEED HELP LIGHTSCRIBE


go to the lightscribe website and read up on how to use
www.lightscribe.com

Terry

Mar 26, 2008 | Computers & Internet

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

40 people viewed this question

Ask a Question

Usually answered in minutes!

Top Computers & Internet Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

kakima

Level 3 Expert

98868 Answers

David Payne
David Payne

Level 3 Expert

14088 Answers

Are you a Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...