Question about Whirlpool Washing Machines

1 Answer

Hi, i have front load washer AMW5080,near to the end of its cycle it doesnt take the softner it remains full when the cycle is finished. i cleaned the filter at the bottom. Thankyou Christine

Posted by on

  • beautycme Nov 05, 2008

    So the solenoid,what can i do to repair it?



    Thanks



    Christine

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 958 Answers

Hi christine,

you could have a problem with the solenoid that dispense the softener. it wont open up to let water flow to that cavity in order to go out to the tub.

tnx 4 using fixya,

drcool

Posted on Nov 05, 2008

  • francis rivero Nov 05, 2008

    it can not be repaired. it should be replaced. but you have to be sure first if it is the solenoid before you replace it. do the test...

    tnx again,


    drcool



×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My washer will not complete a full cycle.. when on rinse does not finish beeps as though it done but is still on rinse..also fabric softner does not drain into machine. machine will spin if I manually set...


my washer does not finish a full cycle ;but is still on rinse and its a bosch and i was wondering
were is the fuses kept in the machine,

sandra read

sandrarread@yahoo .co uk

Jan 22, 2011 | Bosch Nexxt 100 Series WFMC1001UC Front...

1 Answer

Fabric softner tray is left full of murchy water after wash cycle has finished. Machine is brand new and only been used once. Its a Hotpoint Ultima WDD960 washer dryer.


is the machine got good water pressure cus somtimes little water gets in the fabric soften tay and it dosent flush all the softner out. hope this helps.

Sep 02, 2008 | Hotpoint Ultima WD72 Front Load...

2 Answers

NEPTUNE WASHER


"downy ball" is designed to open at the end of first spin that is the way to go without stopping machine. works very well and costs just a few dollars

Feb 07, 2008 | Maytag Neptune MAH5500B Front Load Washer

1 Answer

Water remains in fabric softner compartment


Is the softener entering the machine; that is at the appropriate time? You can take a peep at this time, if possible. If it is water it is okay; this is just the remaining water. The softener is dissolved with water and flushed into the machine.

Dec 05, 2007 | Bosch WFMC 3200 Front Load Washer

2 Answers

GE front loading washer softener dispenser does not dispense


After you put your normal softener into the dispenser, top it with water. The remaining water the machine will pour in. You can even try cleaning it with a toothbrush first.

Nov 29, 2007 | GE WSXH208A Front Load Washer

1 Answer

Softner remaining


Try diluting the softener, some softener are too thick. But first clean out the softenre tray, by pulling it out, or with a tooth brush. Do look into your user manual. Does water enter the soft tray, check this too.

Sep 08, 2007 | Zanussi FJS1225W Front Load Washer

2 Answers

Whirlpool duet fabric softner problem


It obviously is backed up or splashed in from the wash. And if it is just water why worry about it.

Aug 07, 2007 | Whirlpool Duet GHW9150P Front Load Washer

Not finding what you are looking for?
Washing Machines Logo

Related Topics:

51 people viewed this question

Ask a Question

Usually answered in minutes!

Top Whirlpool Washing Machines Experts

Dan Webster
Dan Webster

Level 3 Expert

8205 Answers

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Mike Cairns
Mike Cairns

Level 3 Expert

3053 Answers

Are you a Whirlpool Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...