Question about Maytag 24 in. MDB8600AW Jetclean II Built-in Dishwasher

1 Answer

Maytag dishwasher shuts off during cycles

Maytag washer shuts off during cycles - must reclose door in order for washer to start up again - happens most often during wash cycle. Model # is DWU9202AAE - could it be the switch associated with the door when closed to start cycle?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Maytag Master
  • 2,651 Answers

Thats what it soundslike to me here aoart number which is the entire assy w/both switches included 99002254 retails for about $25

Posted on Nov 05, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Maytag mdb6759aws3


check with a volt meter if you are getting power to the machine where the wire hooks up to the washer. it that's ok then I would check the door latch if it is not closing like it should you may have a problem with the latch switch. I had an whirlpool that happen to and I replace the latch and it worked with no more problem

May 26, 2014 | Whirlpool 24 in. DU900PCD Built-in...

1 Answer

Dishwasher shuts off during cycle


Since the troubleshooting and repair process is too lengthy to include here, please go to the following link: http://www.appliance411.com/service/repairmanual.shtml
to open [or download] the service / repair manual. It is free.

Scroll about half way down the page, in the left column, under Maytag products, select the Maytag / Jenn Air / Jet Clean II "Tall Tub" Dishwasher repair manual... it covers your model dishwasher..

It includes a troubleshooting guide as well repairing instructions

Best wishes on your project.

Dec 01, 2013 | Maytag MDB9600A Jetclean II Built-in...

1 Answer

Service number kuds301xbl2


I would find the electrical breaker for this unit and shut it off for a minute, then re set the breaker thus resetting your unit.

Apr 28, 2013 | Maytag MDBH975AWS Stainless Steel...

1 Answer

After the dishes are done washing, you cannot shut off the washer by pushing on the drain off button on the touchpad.The touchpad is all cracked in front of the button


Warn out close sensor arm. Locate it on door and put a small sticky pad on it to push sensor switch a bit farther. If that works, the adjusting the sensor switch position may be necessary.

Jan 05, 2012 | Maytag MDB7100AWB Dishwasher

1 Answer

Im having trouble with my maytag neptune tl washer it wont finish the spin cycle


Please see the following Whirlpool / Maytag service manual for Neptune washers.
https://secured.whirlpool.com/Service/SrvTechAdm.nsf/2cd44500d572193285256a45004fd9d6/dc59d905140253e18525729c005765f4/$FILE/Maytag_Neptune_Washer.pdf

On page 3-1 the manual explains that if the washer shuts off during the spin cycle, the problem points to a weak spring in the door lock mechanism.

"Shuts OFF In The Middle Of The Spin Cycle:
During the spin cycle, the machine control
monitors the door lock mechanism to ensure
the door is locked. This is done through the
door lock enable switch. During "lock mode,"
the shaft of the door lock mechanism is
pressed forward by the door lock wax motor,
and the shaft presses in the button of the door
lock enable switch. If the machine control
board sees the switch OPEN during the spin
cycle, the machine control board will automatically
shut the washer OFF. This is caused
by a weak spring in the door lock wax motor.
Replace the complete door lock mechanism.



Oct 25, 2009 | Washing Machines

1 Answer

Maytag Neptune Leaking From the Door


possibly door lock not latching could be a bad wax mtr (within door lock asm) or control board

Dec 12, 2008 | Maytag Neptune MAH5500B Front Load Washer

2 Answers

Neptune washer not starting


open panel at rear of control panel usning phillips head and 5/16 the board attached to that panel will probably have a burnt r14 r1 or r21 resistor. this has been an ongoing problem with this model even a class action lawsuit.(lawsuit expired 9/2005) you can change the board but this will eventually happen again maytag directs you to do a full conversion kit rebuild about $400.

Feb 17, 2008 | Maytag Neptune MAH5500B Front Load Washer

4 Answers

Diswasher motor making noise during wash cycle


It could be the impeller on the motor. The impeller fits over the shaft of the motor and might have split/broken up. That funny noise is probably the shaft spinning inside the damage impeller. Fortunately the impeler is fairly inexpensive and easy to replace. I believe there are one or two parts/covers to remove that are held in by a roughly half dozen torx screws.

Jan 04, 2008 | Maytag 24 in. MDB8600AW Jetclean II...

Not finding what you are looking for?
Maytag 24 in. MDB8600AW Jetclean II Built-in Dishwasher Logo

Related Topics:

273 people viewed this question

Ask a Question

Usually answered in minutes!

Top Maytag Dishwashers Experts

Mike Cairns
Mike Cairns

Level 3 Expert

3053 Answers

Mike

Level 3 Expert

4332 Answers

yadayada
yadayada

Level 3 Expert

67800 Answers

Are you a Maytag Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...