Question about Jenn-Air JJW8530C Expressions Collection Dual Single Oven

1 Answer

Jenn Air JJW8530C stopped working

The oven light still works and I checked the circuit breaker and it is ok. The clock on the control panel started fading and now is unreadable. Nothing turns on.

Posted by on

  • secraigyork Nov 05, 2008

    There are no audible tones at all and no response to anything I touch on the control panel, the oven will not turn on and you can't read anything in the clock display. I am thinking it is the electronic control panel that needs to be replaced since I read many complaints on line about that malfunctioning on this and other Jen Air models. I want to replace it myself, but I don't know what I need to order. Parts I see on line are the electronic control panel and then a separate clock display. Both are around $170. Do I need both of these or just the electronic control panel. I appreciate any advise you have.

  • Anonymous Dec 26, 2008

    Did you get your range fixed?

    I have the same problem, of sorts. My display started to dim a while ago, then went to completely unreadable.

    The stove works just fine, no tones & no display, but heats up just fine. The problem is that it won't turn off. So I go to the main circuit breaker, turn it off. If I wait just a few moments, flip the breaker, the stove stays off until I use it again.

    Did you get yours fixed, what did you buy, how was the job?

    Thanks, Joe


×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Jenn-Air Master
  • 2,651 Answers

Can you hear audible tones form the machine when trying to set?? and just hte display has dimmed( amore normal complaint). all functions are working just the clock/display has dimmed to non readable state. if thats the issue youll need to replace the display part number 71003424 retails for about $165

Posted on Nov 05, 2008

  • Ron Coons
    Ron Coons Nov 05, 2008

    i dont have complete model number of your oven , but ther werea few choices diagrams tell me you have a touch panel( part you press for function), a relay board that controls the functions, adn the clock is is really just a display of your choice, i would want to say without seeing for myself you have a bad touch panel($175) for lack of response. and the fading issue relates to the clock$170 and the relay board is about $125

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Jenn air svd46800 not working


I'd be on the hunt for a burned fuse I could replace, on those two circuit panels. If no fuse(s) can be found, I would be sad to think the circuit board itself got fried, and new ones can be goofy expensive, so here's to you finding a burned fuse!!

Jan 14, 2014 | Jenn-Air Ovens

1 Answer

Jenn-air SVD48600P oven will not work / F3 error . I recently replace the expense control / clock unit on my oven because it would not heat. This was advice from repair person. Once replaced the over...


Hi jmhostetler9,

This F3 that keeps flashing on your oven is caused by a shorted or open oven temperature sensor (RTD). To fix this problem check sensor harness and harness connection between oven sensor and oven control. Replace oven temperature sensor (RTD) if wiring is ok.You may contact Sears for the replacement part at 1-800-252-1698; M-F 6:30 AM-10:30 PM - Sat 7:00 AM-9:30 PM - Sun 7:30 AM-9:30 PM - All times Central. Just get your model # ready when you call.

Hope this helps.

Thank you for using FixYa.

Dec 22, 2009 | Jenn-Air JJW8530C Expressions Collection...

1 Answer

I HAVE A JENN AIR WALL OVEN AND WAS CLEANING AND MY JENN AIR MICROWAVE STOP WORKING DO YOU HAVE ANY IDEA'S


Check for a tripped breaker or blown fuse in your fuse box. Assuming they are separate units there is no common connection other then the power source.
Good Luck,
Gilshultz

Dec 03, 2009 | Jenn-Air JJW8530C Expressions Collection...

2 Answers

Oven digital lighted display is dim


You need to replace the C3 capacitor on the control board

http://fixitnow.com/wp/2009/01/28/cheap-fix-for-a-dim-display-on-an-oven-control-panel/

You can replace only the C3 - it is 68uF / 35V and you can go to Radio Shack and get their part # 272-1028 - 100uF/35V one. It takes all but 10 minutes to re-solder the new one in place

May 31, 2009 | Jenn-Air JJW8530C Expressions Collection...

1 Answer

Jenn-Air JMC7000 Microwave Stopped working


take the trim off of the microwave and on the top of the oven on the right side all the way in the back there should be a reset button just like a surge protector.

Dec 01, 2008 | Ovens

1 Answer

No display, No beeps, No heat


I was able to fix my problem by pushing the setup button and holding for about 10 sec.No where in the manual is this described. I call Jenn air and all they could suggest is that I checked the power supply!

Jul 15, 2008 | Jenn-Air JJW8530C Expressions Collection...

1 Answer

Jenn-Air Gas Range SEG196 NO CLOCK/DISPLAY


THE ONLY SOLUTION FOR THE BAD DISPLAY IS TO REPLACE THE CLOCK. I HAVE A JENN AIR OVEN TODAY AS A WORK ORDER TO REPLACE THE CLOCK FOR A FAILED DISPLAY.

FOR THE JGW8130DDB WITH NO POWER ANYWHERE, IT SOUNDS LIKE YOU HAVE A SUPPLY PROBLEM. MAKE SURE THE WIRING IS HOOKED UP WITH THE RED AND WHITE WIRES RECEIVING 240 VOLTS AND THE WHITE WIRE ATTACHED TO NEUTRAL / GROUND.IF THE OVEN HAS A BARE COPPER WIRE AND THE HOUSEHOLD WIRING ONLY HAS THREE WIRES, COMBINE THE WHITE WIRE AND THE COPPER WIRE TOGETHER AND ATTACH TO THE HOUSEHOLD NEUTRAL / GROUND .
UNLESS YOU ARE SURE ABOUT THE HOOKUP IN THE BREAKER/FUSE BOX, DO NOT GO SIMPLY BY THE COLOR OF THE WIRES.

Apr 10, 2008 | Jenn-Air JGW8130A Electric Single Oven

1 Answer

Jenn-air expressions 27" convection wall oven model wm27460 won't heat


reset your breaker reprogram the clock try again what happend last time it was working self clean broiling etc

Dec 27, 2007 | Jenn-Air JJW8530C Expressions Collection...

3 Answers

Jenn-Air WW30430W double oven flashing F7 and beeping


It seems you have a stuck button. Here is a list of fault codes:

JENN AIR
Range/Stove/Oven Fault Codes
Failure
Code
Condition Check/Repair F1 Defective touch pad or membrane Replace touch pad or membrane (this problem is usually the touch pad) F1 Watchdog on board Replace touch pad or clock assembly (also called the ERC) F2 Oven too hot Replace relay board (if present) or oven temperature sensor F3 or F4 Open or shorted oven temperature sensor Replace oven temperature sensor F5 Hardware and watchdog circuits disagree Replace clock assembly (also called the ERC) F6 Missing AC signal Check for proper voltage F7 Function key shorted or stuck button Replace touch pad or clock assembly (also called the ERC) or attempt to un-stick button F8 Analog/Digital supervisory Replace clock assembly (also called the ERC) F9 Door latch supervisory Check door lock circuit or replace clock assembly (also called the ERC) F0 Function key stuck Replace touch pad or clock assembly (also called the ERC)

Dec 09, 2007 | Jenn-Air JJW8530C Expressions Collection...

Not finding what you are looking for?
Jenn-Air JJW8530C Expressions Collection Dual Single Oven Logo

329 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jenn-Air Ovens Experts

Mike Cairns
Mike Cairns

Level 3 Expert

3053 Answers

 Fix Your Board
Fix Your Board

Level 3 Expert

310 Answers

Dan Webster
Dan Webster

Level 3 Expert

8205 Answers

Are you a Jenn-Air Oven Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...