Question about Flat Panel Televisions

1 Answer

Pioneer Elite Pro 1000 HD

I have this TV, suddenly there was a spark on the top and it stopped working, no power nothing. What could be the possible cause? Can this be repaired?

Posted by on

  • 1 more comment 
  • PlasmaHelp Nov 05, 2008

    Great, thanks a lot for your help! I will try all what you have suggested, I have already changed the wire but did not help.

  • PlasmaHelp Nov 05, 2008


    Hello mmechanics

    Do you have any idea who should i call, I mean BestBuy, circuitCity or should I use the YellowBook..any help will be appreciated.

  • wpkuhn Mar 11, 2009

    I have a 42 inch elite pro plasma about three years old. The video starting blacking out a couple months ago, when I switched to Verizon Fios, and now is completely out. I get once second of video, then a green screen for a second and then black. I changed from HDMI cables to component cables with no result. Any suggestions?

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

  • Expert
  • 196 Answers

Yes it can be definately repaired as this spark could be due to extra voltage passed throgh the tv circuit board from the electric outlet you r using.and the tv board was not able to handle that current and it sparked.
or it could also happen due to moisture collected on the board of the tv and the two electric components on the board got in contact due to the moisture and it gor sparked.
to locate the fault first check out the power cord wire is proper or got burned .if it is burned you will not get power.if it is proper then further check the fuse in the tv if it blows there will be no power.on the main power supply board there will be minute electrical components if they r burned or blown off this could be the problem.
if u dont habve any technical knowledge.call a technician and get irt repaired as the reparing will not be too costly.
this r common problem faced by many customers and get it easily repaired.

if this solution helps you.
please rate this solution.
thanks/.

Posted on Nov 05, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Pioneer elite pro 1000hd plasma


Have you checked on eBay , there are some good deals on there ???

Dec 01, 2013 | Flat Panel Televisions

1 Answer

Hdmi picture sound pioneer elite pro r04u


disconect video cable from the box and if you see color video bars on the screen the problems is the box.if you dont see anything you problem is in the display

Nov 10, 2013 | Pioneer Flat Panel Televisions

1 Answer

Pioneer Elite Burn in; possibilty for repair?...


No,it is the Plasma screen panel itself must be replaced.Not possible,because by replacing the Plasma screen panel for the replacement,will cost the same as a new tv.So sorry no,u have to live with it.

Dec 06, 2010 | Pioneer PureVision Pro-1000HD 50 in....

1 Answer

Have pioneer pro-950 hd plasma tv. Has been working great. turned on this evening and got a display saying Plasma Display - starting up. please wait. nothing happens? can't find anything in the manual...


Tries unplug,replug both tv and cable box an hour later.Let the tv reset it self back to the factory setting.The cable box to upgrade it softwares.The tv now should,work again.

Oct 20, 2010 | Pioneer Elite PRO-950HD 42 in. Plasma...

1 Answer

My Pioneer Elite PRO-111FD just shut off on it's own, and now won't turn back on. No green or red indicator light... nothing. Any suggestions?


Check your power source (electrical outlet) and the power cable. If electrical outlet is ok, try using a different power cable (the cable that you plug on to the electrical outlet going to your TV set). If everything is ok but still no indicator light, call your technician there might be a problem with the TV power supply.

Sep 08, 2010 | Pioneer Elite PRO-111FD 50 in. Plasma TV

1 Answer

Just bought a Pioneer elite PRO101, pioneer elite 25SC receiver and a pioneer elite BDP23 blu ray. I just got a new HD 612 receiver from dishnetwork. I have my HDMI out from the dish receiver to the 25sc....


Check what in the HD 612 receiver what year it was made and the software,frameware version it in the programing.Do the same with the tv might not have compatible version of softwares.

Jun 22, 2010 | Pioneer Elite® PRO-101FD TV

1 Answer

We had a electrical storm and beleive that our house was hit by lightning. It looks like the TV was not plugged into a power surge protector. The TV does not have sound or a picture, but we can use the...


Hi there! If you have a decoder and this was plugged in on the panel it may have damaged the input board. Alternatively have the decoder checked first or try another TV on the same decoder. Lightning can hit the dish and run down through the line into the decoder and/or into the TV. Best Wishes and Good Luck, JUS004

Aug 22, 2009 | Pioneer Elite PRO-1140HD 50 in. Plasma...

1 Answer

Connecting my comcast hd cable to my pioneer elite hd 1130


you will need the other cables. Hd tv won't work with the old school hookups. rca jacks' can sort out those frequencies

Jan 28, 2009 | Pioneer Elite PRO-1140HD 50 in. Plasma...

1 Answer

Pioneer 60"hd plasama wallmount


If you have H/D one of your cables might be loose i would suspect the red one

Oct 22, 2007 | Pioneer Elite PRO-1540HD 60 in. Plasma...

Not finding what you are looking for?
Flat Panel Televisions Logo

Related Topics:

152 people viewed this question

Ask a Question

Usually answered in minutes!

Top Flat Panel Televisions Experts

The Knight
The Knight

Level 3 Expert

68197 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Jaime Hernandez

Level 3 Expert

2267 Answers

Are you a Flat Panel Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...