Question about Hotpoint RGB745 Gas Kitchen Range

1 Answer

Sound produced by the stove

There is a sound that the oven produces, I think! I have not benn able to identify the origin of the soundf! It sounds like a bang as if the door is being slammed! make sme fearful of an explosion!

Posted by on

  • mickcastillo Nov 05, 2008



    Dear Amelisdad,



    It happens when the oven is turned on! And there is no smell of gas! What would a bake igniter be? Is that equivalent to the pilot light on the stove?

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Sergeant:

    An expert that hasĀ over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 324 Answers

Is it when you are baking? A bad bake igniter will cause a noise like that.

Posted on Nov 04, 2008

  • yes it is simmilar to the pilot.

    if you take off the bottom pan of the oven you can see it it is cerimic. i replace them all the time evan if they seem good they can still be bad.

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The Whirlpool Gas Stove Super Capacity 465 sound like the Gas is on but the click click click that it makes when I turn on the burners is gone. The oven has no fire either...sound and smells the gas


Had a problem like this with mine..turned out to be electrical. The ignitors, that produce your clicking are controlled by electricity and circuit breaker (in power box) controlling the outlets on that area of kitchen was tripped. Hopefully your answer is this simple. Good luck!

Dec 10, 2014 | Whirlpool Kitchen Ranges

1 Answer

I have 36 in Imperial SS gas stove with constant pilot lights on .i believe its a commercial unit.I am unable to start pilot light for oven ,rather it starts and as soon as i release red button ,flame goes...


it sounds like the thermocouple which is heated by the flame is faulty its purpose is to hold the gas valve open so gas can flow but if the pilot goes out the thermocouple stops producing electricity and so the valve closes its there for safety reasons

Oct 13, 2014 | Kitchen Ranges

1 Answer

Igniters not working, no clicking sound. Cannot light stove with match.


Greetings
If none of you top burners produce clicking then it's most likely your ignition module. They can completely die. look for small box on back of range. @$60 Sears Parts Direct.

Easy Fix



Feedback Much appreciated

Aug 05, 2011 | Tappan TGF657 Gas Kitchen Range

1 Answer

The electric panel on my smooth top stove just went out with a popping sound rendering the oven unusable but the stove top burners are working.............what could have happened and is it worth it to get...


Electric gas igniters sometimes get stuck in one position causing a clicking sound. The clicking sound that you hear is the electric arc that is pulsing from the igniter conductor (wire) to ground (the gas burner). It receives power from the electrical outlet that the stove is plugged into.
Residue from food and sometimes cleaning products may be preventing the igniter from producing a spark (Arc) to the base of the burner. This is a common problem that occurs when the stove has been cleaned or food is allowed to build up. Make sure that the igniter and the burner base are clean and dry. This will help with proper operation. Oven cleaner and a small tooth brush may be used to accomplish this. Another problem with ignition may occur if you have too little (touching) or too much space between the igniter and the base of the burner; it will prevent the burner from igniting. You should only have a little more space than the thickness of a nickel between the burner base and the igniter. A good "blue" arc from the igniter to the burner base is optimal. If this doesn’t work, you may need to replace the electric igniter module. Good luck.

Jul 21, 2010 | Kenmore 95423 Stainless Steel Electric...

1 Answer

I have a magic chef oven model # 61S04PAW. the


Electric gas igniters sometimes get stuck in one position causing a clicking sound. The clicking sound that you hear is the electric arc that is pulsing from the igniter conductor (wire) to ground (the gas burner). It receives power from the electrical outlet that the stove is plugged into.
Residue from food and sometimes cleaning products may be preventing the igniter from producing a spark (Arc) to the base of the burner. This is a common problem that occurs when the stove has been cleaned or food is allowed to build up. Make sure that the igniter and the burner base are clean and dry. This will help with proper operation. Oven cleaner and a small tooth brush may be used to accomplish this. Another problem with ignition may occur if you have too little (touching) or too much space between the igniter and the base of the burner; it will prevent the burner from igniting. You should only have a little more space than the thickness of a nickel between the burner base and the igniter. A good “blue” arc from the igniter to the burner base is optimal. If this doesn’t work, you may need to replace the electric igniter module. Good luck.

Jul 07, 2010 | Magic Chef 31000 Gas Kitchen Range

1 Answer

Gas burners and stove electronic ignite not working


Electric gas igniters sometimes get stuck in one position causing a clicking sound. The clicking sound that you hear is the electric arc that is pulsing from the igniter conductor (wire) to ground (the gas burner). It receives power from the electrical outlet that the stove is plugged into.
Residue from food and sometimes cleaning products may be preventing the igniter from producing a spark (Arc) to the base of the burner. This is a common problem that occurs when the stove has been cleaned or food is allowed to build up. Make sure that the igniter and the burner base are clean and dry. This will help with proper operation. Oven cleaner and a small tooth brush may be used to accomplish this. Another problem with ignition may occur if you have too little (touching) or too much space between the igniter and the base of the burner; it will prevent the burner from igniting. You should only have a little more space than the thickness of a nickel between the burner base and the igniter. A good “blue” arc from the igniter to the burner base is optimal. If this doesn’t work, you may need to replace the electric igniter module. Good luck.

Jun 13, 2010 | Viking VGIC305-4B Gas Kitchen Range

1 Answer

The gas burners are not igniting when being turned on??? When the dial is turned the gas comes on but the burner does not lite - no clicking sound? Thanks for any help!


Electric gas igniters sometimes get stuck in one position causing a clicking sound. The clicking sound that you hear is the electric arc that is pulsing from the igniter conductor (wire) to ground (the gas burner). It receives power from the electrical outlet that the stove is plugged into.
Residue from food and sometimes cleaning products may be preventing the igniter from producing a spark (Arc) to the base of the burner. This is a common problem that occurs when the stove has been cleaned or food is allowed to build up. Make sure that the igniter and the burner base are clean and dry. This will help with proper operation. Oven cleaner and a small tooth brush may be used to accomplish this. Another problem with ignition may occur if you have too little (touching) or too much space between the igniter and the base of the burner; it will prevent the burner from igniting. You should only have a little more space than the thickness of a nickel between the burner base and the igniter. A good "blue" arc from the igniter to the burner base is optimal. If this doesn’t work, you may need to replace the electric igniter module. Good luck.

Feb 09, 2010 | Heartland 3635B Dual Fuel (Electric and...

1 Answer

I can't get one of my burners to light on my ge gas stove. It clicks and emits gas, but no flame.


Electric gas igniters sometimes get stuck in one position causing a clicking sound. The clicking sound that you hear is the electric arc that is pulsing from the igniter conductor (wire) to ground (the gas burner). It receives power from the electrical outlet that the stove is plugged into.
Residue from food and sometimes cleaning products may be preventing the igniter from producing a spark (Arc) to the base of the burner. This is a common problem that occurs when the stove has been cleaned or food is allowed to build up. Make sure that the igniter and the burner base are clean and dry. This will help with proper operation. Oven cleaner and a small tooth brush may be used to accomplish this. Another problem with ignition may occur if you have too little (touching) or too much space between the igniter and the base of the burner; it will prevent the burner from igniting. You should only have a little more space than the thickness of a nickel between the burner base and the igniter. A good “blue” arc from the igniter to the burner base is optimal. If this doesn’t work, you may need to replace the electric igniter module. Good luck.

Dec 17, 2009 | Avanti G20AW-1 Gas Kitchen Range

1 Answer

Gas burners/electronic ignition


Electric gas igniters sometimes get stuck in one position causing a clicking sound. The clicking sound that you hear is the electric arc that is pulsing from the igniter conductor (wire) to ground (the gas burner). It receives power from the electrical outlet that the stove is plugged into.
Residue from food and sometimes cleaning products may be preventing the igniter from producing a spark (Arc) to the base of the burner. This is a common problem that occurs when the stove has been cleaned or food is allowed to build up. Make sure that the igniter and the burner base are clean and dry. This will help with proper operation. Oven cleaner and a small tooth brush may be used to accomplish this. Another problem with ignition may occur if you have too little (touching) or too much space between the igniter and the base of the burner; it will prevent the burner from igniting. You should only have a little more space than the thickness of a nickel between the burner base and the igniter. A good “blue” arc from the igniter to the burner base is optimal. If this doesn’t work, you may need to replace the electric igniter module. Good luck.

Jan 26, 2009 | Tappan TGF657 Gas Kitchen Range

1 Answer

Oven makes an exploding sound when put on "bake" smell of gas


sounds like the oven valve is leaking slightly. just as a precaution i wouldn't use it till you can get a repair man out there.

Jan 02, 2009 | Tappan TGF320 Gas Kitchen Range

Not finding what you are looking for?
Hotpoint RGB745 Gas Kitchen Range Logo

179 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hotpoint Kitchen Ranges Experts

Dan Webster
Dan Webster

Level 3 Expert

8205 Answers

Ismael Rodriguez...

Level 2 Expert

162 Answers

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Are you a Hotpoint Kitchen Range Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...