Question about Grandstream GXP-2000 IP Phone

1 Answer

Grandstream budget tone 200

I need to unlock the settings
so I can connect to sip provider
how do i do this
ie cannnot transmit sip paswords tc

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 3 Answers

Go to internet
Type your the ip phone address
type admin as password if you never changed it
That's it

Posted on Nov 16, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Factory Reset Grandstream GXP 2000 w/o using the menu?


From the Granstream User Manual (Page 44):
Restore Factory Default Setting
WARNING: Restoring the Factory Default Setting will delete all configuration information of the phone.
Please backup or print all the settings before you restoring factory default settings. Grandstream is not
responsible for restoring lost parameters and cannot connect your device to your VoIP service provider.
INSTRUCTIONS FOR RESTORATION:
Step 1: Press "OK" button to bring up the keypad configuration menu, select "Config", press "OK" to
enter submenu, select "Factory Reset" (Please refer to Table 5-1 of keypad flow chart)
Step 2: Enter the MAC address printed on the bottom of the sticker. Please use the following mapping:
0-9: 0-9
A: 22 (press the "2" key twice, "A" will show on the LCD)
B: 222
C: 2222
D: 33 (press the "3" key twice, "D" will show on the LCD)
E: 333
F: 3333
Example: if the MAC address is 000b8200e395, it should be key in as "0002228200333
395".
NOTE: If there are digits like "22" in the MAC, you need to type "2" then press "->" right arrow key to
move the cursor or wait for 4 seconds to continue to key in another "2".
Step 3: Press the "OK" button to move the cursor to "OK". Press "OK" button again to confirm. If the
MAC address is correct, the phone will reboot. Otherwise, it will exit to previous keypad menu interface.

https://www.grandstream.com/products/gxp_series/general/documents/gxp_usermanual_english.pdf

Apr 03, 2014 | Grandstream GXP-2000 IP Phone

1 Answer

Does grandstream gxp 280 support vonage


Hi,
Yes it supports.

SIP Account Name: Vonage
Phone Number: xxxxxxxxxx (enter your Vonage phone number)
Authentication ID: xxxxxxxxxx (enter your Vonage phone number)
Authentication Password: xxxxxxxx (enter your Vonage Authentication Password, this can be Provided to you by Vonage. Please remember that the password is case sensitive.)
SIP Domain: leave blank
Proxy Address: sphone.vopr.vonage.net
Port: 5061
Outbound Proxy: sphone.vopr.vonage.net
Port: 5061
Local Port: 5061
Register Timer: 3600
Codec: Auto
Pkt. Time: Default
Out of Band DTMF: On

-Karthik.

Sep 25, 2012 | Grandstream GXP-280 IP Phone

2 Answers

I have the GXV-3000 IP Video phone, there is a RJ11 jack on the back. How do I use the interface? Connect to my phone line from ATT or connect to a regular phone (as an extention?)? Thanks.


A copy of the user manual for your IP phone is found here: http://www.grandstream.com/user_manuals/GXV3000_User_Manual.pdf

I have browsed through and found no mention of an RJ-11 port on the back, only two RJ-45 Network ports, one for connecting to a PC in switch mode and one for ethernet mode.

If your phone is different and DOES have an RJ-11 port (as some IP phones do), I can only assume it is to connect to a landline to offer landline services as well as IP services.

Under those circumstances of course DO NOT attempt to plug in your landline RJ-11 into an RJ-45, it will not work and you risk shorting something out.

May 03, 2011 | Grandstream GXV-3000 IP Video Phone

1 Answer

Call forward will not turn off, have tried *74 & *73 , have rebooted and turned off then on, call divert symbol still on and phone calls still diverted.


To set Unconditional Call Forward ON Dial "*72" for a dial tone. Dial the forwarding number followed by "#". Wait for dial tone. LCD will display "Call FWD Activated"
To Cancel Unconditional Call Forward: dial "*73" and get the dial tone, then hang up. LCD will display "Call FWD Activated

but, since you have tried those two, it could be that there might still be a different type of call forward option that is still ON, on your phone like Busy Call Forward and Delayed Call Forward 1. To Cancel Busy Call Forward: dial "*91". Wait for dial tone. Hang up.
2.To Cancel Delayed Call Forward: Dial "*93" for a dial tone, then hang up.

Let me provide you a link to the website which I used as a reference for your future reference.
http://www.grandstream.com/user_manuals/GXP_User_Manual.pdf

Apr 27, 2011 | Grandstream GXP-2000 IP Phone

1 Answer

I get a dialling tone on my Soundpoint Pro but just the numbers keys sound and it wont actaully make teh call


I'm assuming you already have a voip account set up. sounds like you've not set the dtmf tones to the correct setting, usually set to rfc2833 and/or sip info - set in audio to no.

Apr 14, 2011 | Polycom SoundPoint Pro SE-225

1 Answer

Does the system has music on hold and sip trunk


I guess you're new to this. The phone may have music on hold, it depends on the model but is generally something you have when using a pbx.
No phone has a sip trunk, that is what you connect to with your voip provider. You need to setup a sip account with a voip supplier and program your phone with the settings provided by them.

Apr 03, 2011 | IP Phones

1 Answer

I have polycom SoindPoint 301 and i would like to use as SIP to one of the VoIP providers. I dont have asterisk in my network and i would like to connect it directly to the VoIP provider. So there is no...


1st. Get the IP address of the phone. and type that into browser.
*- default user: Polycom / password: 456

*- Under menu SIP, type in your voip provider
*-Under menu LINES type in user info and "secret" should be your password.

Make sure your ports are open (SIP is usually 5060) you can change it in that same config screen.

Mar 28, 2011 | Polycom SOUNDPOINT IP 301 SIP

4 Answers

Polycom Soundpoint IP 501 - URL call is disabled


This in it's most basic description means that the phone is unable to register with the SIP server, most likely for lack of internet connectivity or a firewall blocking the packets.

If you've verified connectivity and opened the proper ports and the phone fails to initialize and still getting “URL Call Disabled” or all of the above parameters are correct, update the firmware for the router. This can usually be done within the router configuration. Then reboot in order, the cable modem or DSL, the router or switch, then the phone. This may solve the problem.

If still having the same issue, confirm in the router configuration for settings such as SIP proxy, gateway, or application layer or any configuration setting for SIP or VOIP. If any of these do exist, make sure they are turned off as these may only confuse or adversely affect many implementations.

Jan 08, 2008 | Polycom SoundPoint IP 501 IP Phone

Not finding what you are looking for?
Grandstream GXP-2000 IP Phone Logo

Related Topics:

296 people viewed this question

Ask a Question

Usually answered in minutes!

Top Grandstream IP Phones Experts

yadayada
yadayada

Level 3 Expert

60792 Answers

David Payne
David Payne

Level 3 Expert

13437 Answers

kakima

Level 3 Expert

96417 Answers

Are you a Grandstream IP Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...