Question about Phones

Open Question

How do you change the time on the samsung idcs 18d phone?

Posted by on

4 Suggested Answers

SASSYBEAR
  • 148 Answers

SOURCE: Samsung iDCS 18D

http://www.telephonesystemsdirect.com/pdfs/iDCS_Keyset_User_Guide_10_2005.pdf

here is the user manual .. usually you would dial 9 to get an outside line .. or just push one of the open line buttons. No batteries are needed it gets its power from the phone line.

Posted on Mar 11, 2008

SOURCE: samsung idcs 18d

Wow thank you sooooo much! We were trying to figure this out at work, and Ramoth's suggestion worked perfect. Thanks again!

Posted on Nov 04, 2008

diodeic
  • 1622 Answers

SOURCE: Cannot set the time and

HI, i got the scoop on how to change the date and time. first while handset is on hook press TRSF then dial 200 Dial 1234 the display shows enable cus prog dial 1 to enable then press TRSF To change the date and time from here out press TRSF and dial 505 the display will show : (this is an example)
old: 6010104:0047

new:WMMDDYY:HHMM
Enter the new time and date using the above format and the system will return to step 2. Verify the time and date and re enter if necessary Press TRSF to store and exit. or press SPK to store and advance to the next program.

Hope it helped....

Good luck..

Posted on Mar 15, 2011

PhoneSystems
  • 213 Answers

SOURCE: Hi, I am looking to add an extension to a group,

The easiest way to Add an extension to a group is to follow the attached video, there are loads like this available at http://www.abbeytelecom.com

Posted on Mar 16, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Our office has a two line system on a idcs 18d our first line will ring throughout the office but the second line is silent and only lights up. How do we make it to where it rings as well?


Assuming you have the programming manual, you need to program trunk 702 to ring to the operator group 500 in MMC 406 in the software programming manual.

Feb 29, 2016 | Samsung Falcon iDCS 18D Display Phone with...

1 Answer

No longer displays any data, i.e. date, time, location on display screen. Does not change when there in an incoming call.


Try plugging it into a different jack. If there's no change, the phone is bad. If it works ok, the port in the phone system is bad. Switch it to a spare port, if available.

Oct 08, 2015 | Samsung Falcon iDCS 18D Display Phone with...

1 Answer

My Samsung iDCS 18D phone will not ring. The Line light flashes, and I can asnwer calls, but it won't ring. I have tried adjusting volume levels, etc- but it seems like the ringer is turned off.


First prove it is not a faulty handset. Find someone elses phone that is the same model as yours and rings then plug it into your line. If that phone rings your handset is faulty. If the borrowed phone will not ring but flashes then it is programming

Jul 06, 2015 | Samsung Falcon iDCS 18D Display Phone with...

1 Answer

Samsung iDCS 18D - no message indicator light when there are new voicemails. How do I fix this?


I would suggest the power supply in your phone system needs replacing as it is making the phone system do things it shouldnt

Mar 05, 2015 | Samsung Falcon iDCS 18D Display Phone with...

1 Answer

When in night mode, how do I make the samsung idcs 18d ring on every extension


if you know your password for your phone system do this. enter programming mode by pressing transfer key, type 800 enter your password then volume up key then speaker key. go to program 601 station groups find unused station group ie 510. make this group unconditional and under members add all thr extensions you want to ring then press speaker key. then go to program 406. enter line number of line and under night mode tell it the station group number you programmed above

May 07, 2014 | Samsung Falcon iDCS 18D Display Phone with...

3 Answers

Samsung iDCS 18D


http://www.telephonesystemsdirect.com/pdfs/iDCS_Keyset_User_Guide_10_2005.pdf

here is the user manual .. usually you would dial 9 to get an outside line .. or just push one of the open line buttons. No batteries are needed it gets its power from the phone line.

Mar 11, 2008 | Samsung Falcon 18 Corded Phone

3 Answers

Samsung idcs 18d


got the scoop on how to change the date and time. first while handset is on hook press TRSF then dial 200 Dial 1234 the display shows enable cus prog dial 1 to enable then press TRSF To change the date and time from here out press TRSF and dial 505 the display will show : (this is an example)
old: 6010104:0047
new:WMMDDYY:HHMM
Enter the new time and date using the above format and the system will return to step 2. Verify the time and date and re enter if necessary Press TRSF to store and exit. or press SPK to store and advance to the next program.

Mar 10, 2008 | Phones

Not finding what you are looking for?
Phones Logo

Related Topics:

215 people viewed this question

Ask a Question

Usually answered in minutes!

Top Phones Experts

kakima

Level 3 Expert

96417 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Cindy Wells

Level 3 Expert

4755 Answers

Are you a Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...