Question about Philips CDR570 CD Recorder

1 Answer

Cdr570 i have a phillips cdr570 when on the whole thing freezes after a few seconds the power is still on but it will not let you press any buttons or eject disc can you help is there some sort of master reset?

Posted by on

  • hill79_620 Nov 04, 2008

    my phillips cdr570 seems to freeze after a few seconds and will not operate, the power is still on but nothing works can you help is there a reset?

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Draw will not shut

Posted on Feb 06, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

A CD got stuck in my Cambridge Soundworks 765i. How do I get it out?


There should be a small hole in the front of your CD player. Straighten out a paper clip, and poke it in that hole. That should eject the CD drawer.

Jan 08, 2016 | Cambridge Soundworks CD Players

1 Answer

Front panel lights not working however everything else works on it. the power light is the only light that comes on


error en fuente alimentacion comprueba los condensadores alguno estar rebentado, cabialos todos y casi seguro que funcionar,pero revisa tambien el circuito de la grabadora debajo de la mecanica.

Apr 08, 2014 | Philips CDR570 CD Recorder

1 Answer

Dn-s3500 cd stuck


The way to force an eject, is to turn off the deck for a few minutes. Then when you turn it back on, continuously keep pressing the eject

May 20, 2012 | Denon DNS3500 CD Changer

1 Answer

PLAY/PAUSE Button issue Hi, got a problem with an CDJ 1000 MKI when i put a cd on it , and starts playing i try to press the play/pause button it will freeze and will have to reset the machine, have...


Yes, this can be caused by a faulty button or buttons, where they are stuck in the on position. The control line gets blocked by the stuck button, and won't even eject in some cases. Take it to a service centre and they should be able to resolve it while you wait, and drink their tea :)

Aug 19, 2011 | Pioneer CDJ-1000 CD Player

2 Answers

The disktray automaticly opens and closed several times. When I put a cd in de tray the tray closed and opend without playing


Hi, when a disk tray automatically opens and closed several time, might be from the disk tray itself is jambed that's why it opening and closes by itself. You can open up the player and check if any thing in hooking it.

Also it might need to be replaced, the wheels inside the DVD player might be too weak to move in and out without moving automatically.

The way i see it, you might end up replacing the disk tray with a new one..

Have a nice day.

Feb 18, 2011 | CD Players

1 Answer

My dvd wont read discs


Hello,

When you get the no Disk Read Error, it normally occurs for one of two reasons. Either dust has built up on the lens of the laser mechanism, or the operating voltage of the laser has drifted off slightly due to heat and age. Of course, occasionally there are actual failures of components, which cause this, but these are the main two reasons.

Tools required by this guide are (not all are required for all parts however):

1) A normal sizes star (Phillips) screwdriver.
2) A very small Phillips screwdriver.
3) A small, flat screwdriver.
4) Some isopropanol alcohol (IPA)
5) A few cotton buds
6) A little mechanical grease. (I’ve used Vaseline before)
7) A can of compressed air.
8) An oscilloscope.
Cleaning the laser lens
1) Remove any CDs from the unit and unplug all leads and memory cards. Turn the unit upside down and use the small, flat screwdriver to pop out all the little plastic and rubber screw covers.
Take your normal sized Phillips screwdriver and unscrew all the screws.
Try to write down where each part comes from (including the screws as they have to be returned to the same location at the end. Stick them in a tub to keep them safe.

Turn the unit back up the right way, holding it all together. Place on the work surface and gently ease the case open. You may have to tilt the lid slightly towards the front, and slide out to avoid the cd tray.


BE CAREFUL not to damage the eject/power button ribbon cable, as these are very fragile..
Take a cotton bud and careful place some of the alcohol on it (but not so much that it is dripping everywhere). This alcohol is the same (or similar) to the small bottle of alcohol which is in audio and video cassette cleaning kits. This is probably the best way to locate a source. Locate the lens (the circular glass part) and very gently rub the cotton bud around the lens in circular motions for about 30 seconds, being very gentle. Once done, flip the cotton bud over and dry the lens with the other end for about 10 seconds.
The laser part slides on rods to reach different rings of the cd. These can become clogged up with dirt and dust, making movement difficult. So, take a clean cotton bud and clean the slide rods thoroughly, making sure you get to all parts and give a good clean. You have now completed the cleaning process. This often cures read errors and should always be attempted first. Reverse the dismantling process and put the machine back together, making sure you DON’T TRAP the eject / power button ribbon cable, as this can cause serious problems for you if it happens.
Power on the unit and try to load both a CD and a DVD game. If all works fine then CONGRATULATION on completing the guide. but if otherwise you have to change the You have now completed the cleaning process. This often cures read errors and should always be attempted first. Reverse the dismantling process and put the machine back together, making sure you DON’T TRAP the eject / power button ribbon cable, as this can cause serious problems for you if it happens.

Power on the unit and try to load both a CD and a DVD game. If all works fine then CONGRATULATIONS on completing the guide. if this dont wonk you have to change the DVD drive of the DVD player , in which this comes with a complete laser and mechanism...
Hope this help...




Jun 26, 2010 | CD Players

1 Answer

Disc(s) jammed in sony 5-disc player--eject won't work


There are 6 or 7 phillips head screws that keep the top on; remove them and pop the top. This will give you access to all CD's. Remove them all, then plug the unit back in and press the open close button and check for normal operation. If it still wont open, it's broken a gear and needs to be serviced. You may consider replacement of the unit if inoperative, the replacement model is priced at $129.00 and a repair would probably cost the same if not more. If you need further help, post a comment and I can help you further.

Dec 22, 2009 | Sony CDP-CA70ES 5-Disc CD Changer

2 Answers

DN- S3500 Cd won't eject.


HI...

There might be a round access hole on the bottom of the case with a symbol near it.If it does , turn the screw down inside. Many CD players have a Panic hole like that.

Feb 10, 2009 | Denon DN-S3500

4 Answers

DN- S3500 Cd stuck


HI,

Please reset the unit for 4 hours by unplugging all the cords,even the power cord from the unit and then plug them back again after 4 hours.Now try ejecting the disc.Let me know the result.

Feb 10, 2009 | Denon DN-S3500

Not finding what you are looking for?
Philips CDR570 CD Recorder Logo

Related Topics:

200 people viewed this question

Ask a Question

Usually answered in minutes!

Top Philips CD Players Experts

phil

Level 2 Expert

567 Answers

kakima

Level 3 Expert

96372 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21936 Answers

Are you a Philips CD Player Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...