Question about Computers & Internet

1 Answer

My son is a soldier stationed on a base in Iraq. He has a Ts2 satellite network. He is having problems getting there routers to connect to the primary switches. Any help would be greatly appreciated.

Posted by on

  • 1 more comment 
  • wjones0957 Nov 04, 2008



    They are trying to connect 4 or 5 routers together. These routers are in different locations. Some of the soldiers have connections but others don't. Thank you for your help. As a mother I am anxious for them to get this promblem fixed. This is one of the few ways we can stay in contact.

  • Lalit Varadpande
    Lalit Varadpande May 11, 2010

    thank youfor the reply..i am sorry to tell you that i will be not be able to help you..please do consult other experts for a solution or you could post this question as a premium question or a chat with one of them..regards!


  • Lalit Varadpande
    Lalit Varadpande May 11, 2010

    please give more details of the problem..


×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Make sure the routers are set to router operating mode and not gateway (in advanced routing settings if linksys brand) and they are set as uplinks to each other and not in the WAN port. Make sure all the DHCP servers are set to OFF and just have the one hosting the internet enabled. This way anyone who connects to any router will be pointed to the correct DHCP server (the one hosting your internet connection)

...being in military i would assume they have unix based routers or at least standard routers with flashed unix firmware ...im using DD-WRT flashed linksys WRT54G routers and boost the transmit power to 210mW. Plus being military they should really have a yagi based antenna with at least 24DBi.
..any more questions email jon@thamind.net

Posted on Mar 18, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Wireless router configuration


If you don't already have a wireless network, you can use an AirPort base station to create one. To configure an AirPort base station, you connect the Ethernet connection to the WAN port on the base station. In turn, the base station creates a Wi-Fi (wireless) connection to the Internet. Consult the documentation for your AirPort base station for more information on how to set up your wireless connection. Once you have a Wi-Fi network available, use these steps to tell your Mac to join it:
  1. Click the Wi-Fi menu icon airport_symbol.png and select your Wi-Fi network from the list of available networks.
  2. If prompted, enter the password for your Wi-Fi network.
  3. Check "Remember this network" to have your Mac automatically join your home network.

Mar 03, 2014 | ASUS Us Rtn53 Dual Band Wireless Router...

1 Answer

I am trying to connect a mac to the router - need some help


. you will need the "airport " networking gear
2. If you have a base station you need to connect this to your router or modem with an Ethernet cord ( RJ45)
3. Connect the base to the MAC pc Ethernet port.
4.connect the base station power and look for the power light to go on.
5.Open MAC applications folder then the "utilities " sub folder.
6. Double click the "airport utility icon"
7. Base station on the left of the screen ( click) then choose "continue".
8. if not on the left of the screen then select "setup a new station" then click "continue .
9. enter password for the base station ( write it down) keep it . click "continue".
10. next select create and new wireless network
11. create a name for the connection
12. then select "WPA" for the security then type in a password
13Next .make a selection for either a router or modem the click "continue.
14. next select DHCP the click continue
15.Verified then click "continue" then wait for the restart of the base station.
16. You should see "congratulations" then click "quit"

Aug 13, 2010 | Dell TrueMobile 2300 Wireless Broadband...

1 Answer

Weak or NO signal to MN-500 Wireless Base Station


Have you tried upgrading the firmware - http://www.tomshardware.co.uk/forum/page-7797_17_0.html

Jan 25, 2009 | Microsoft Broadband Networking MN-500...

1 Answer

Sph200d not getting ip address from router


I had the same problem. I set up a static address instead and it works very well. I just copied the details form my laptop, diabled the laptop and set up the phone with the same details as I had on my laptop. Once I start the laptop again, it will get another address. --Jonas

Jul 23, 2008 | NetGear SPH200D IP Wireless Phone

1 Answer

How to set up network on belkin G+ wireless usb adapter


do you have a Wireless Router + Broadband modem?

This is like a base station to which your remote wireless node communicates (to get connected to your home network and internet.

something like this http://catalog.belkin.com/IWCatProductPage.process?Product_Id=187337 for an ADSL connection.

If you are on cable, you can either get a Router similar to the one above (but for cable) http://www.linksys.com/servlet/Satellite?c=L_Product_C2&childpagename=US%2FLayout&cid=1138056788757&pagename=Linksys%2FCommon%2FVisitorWrapper&lid=8875739789B01

or if your Cable modem has LAN ports you may just be able to use an "Access Point" to add Wireless capabilities. http://www.linksys.com/servlet/Satellite?c=L_Product_C2&childpagename=US%2FLayout&cid=1126536803676&pagename=Linksys%2FCommon%2FVisitorWrapper&lid=0367639789B22

Oct 14, 2007 | Belkin (F5D7050) 802.11a/g/b Wireless...

1 Answer

Networking a Printer on a wireless network


Deanna, if the mfc is not that old, take it back to the dealer and ask for changing it to a wireless printer (extension: CW). Do you really need the fax function? If not, try this printer: DCP 750CW. If yes, get the MFC 845 CW. The CN printer have to be connected directly to router or pc/laptop.

Sep 27, 2007 | Brother MultiFunction Center MFC-440CN...

1 Answer

Network, Internet, or Base Station Management Tool Are Unavailable


To resolve this issue, turn off Internet Connection Sharing on your network connection: 1. Click Start, click Control Panel, and then double-click Network Connections. 2. Click your network connection, and then under Network Tasks, click Change settings of this connection. 3. On the Advanced tab, clear the Allow other network users to connect through this computer's Internet connection check box. 4. Click OK. 5. Restart your computer.

Feb 16, 2006 | Microsoft Broadband Networking MN-500...

1 Answer

Network, Internet, or Base Station Management Tool Are Unavailable


To resolve this issue, turn off Internet Connection Sharing on your network connection: 1. Click Start, click Control Panel, and then double-click Network Connections. 2. Click your network connection, and then under Network Tasks, click Change settings of this connection. 3. On the Advanced tab, clear the Allow other network users to connect through this computer's Internet connection check box. 4. Click OK. 5. Restart your computer.

Feb 16, 2006 | Microsoft Broadband Networking MN-100...

1 Answer

Connection Issues Occur When I Try to Connect Through a Broadband Network Adapter


To resolve this issue, remove the network bridge. To do so, follow these steps: 1. Click Start, and then click My Network Places. 2. In the left pane, click View Network Connections. 3. Look for any connection that is bridged. 4. Right-click the bridged connection, and then click Remove From Bridge. 5. Repeat step 4 for each connection that is connected with a bridge. 6. When the bridge is removed from each network adapter, right-click Network Bridge, and then click Delete. 7. Click OK. When the all the bridged connections and the network bridge are removed, the broadband hardware is automatically detected.

Feb 16, 2006 | Microsoft Broadband Networking MN-100...

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

78 people viewed this question

Ask a Question

Usually answered in minutes!

Top Computers & Internet Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

kakima

Level 3 Expert

102366 Answers

David Payne
David Payne

Level 3 Expert

14161 Answers

Are you a Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...