HOW DO I FIND MY LINKSYS G2.4 ENCRIPTION KEY?

"encription code"? Security Key? Password? If you have the wireless secured, only you have the password. You can reset it to default settings and reconfigure the SSID and Security Key. If you supply the Make, Model of wireless device, it would be helpful.

connect it directly to your laptop/pc with a network cable RJ45 and log into it, you should have a disk or book which gives you the password, usally admin and password, in here you can set the encription code

try reboot router (power off and on), change all router passw and secure wireless with WPA2 encription level with a long passw)

There is no way that you can view the encryption key. It negates the purpose of creating one. You will have a to create a new one unfortunately.

you set it connecting as admin to your router.
set xeme encription as your PC and of course same key

Try going to the 2wire website ...

http://support.2wire.com/index.php?page=download

Not sure from your post if your using the adapter or their gateway.

in esence what you do is:

1. go into configuration page (check your router manual or documentation)
2. go into wireless
3. change the defaul SSID (that is the network name or Access point name or your router name)
4. make a note of the SSID you have defined (you needed when setting up your client computer)
5. if you want you can stop broadcasting the SSID (recommeded.. that's why you noted that on previous step
4. set up your encription method (wep, wpa, wpa2).. wp2 is recommeded or wpa if wpa2 is not avaliable or wep if that's the only option as it is better than nothing.
5. configure and note you passphrase/key (you need this to configure your client computer)

this is a good article that will give you some fundaments
http://technicallyeasy.net/2007/07/securing-wireless-network/
and this is a walk through securing a router with an example for a popular linksys router:
http://technicallyeasy.net/2007/09/securing-linksys-wrt54g-wireless-router/
and this is a wlak through securing a router with an example for a polar d-link router:
http://technicallyeasy.net/2007/09/securing-d-link-di-524-wireless-router/

other routers may be different but in esence is the same.

let us know how it went!! good luck!!

To secure your belkin wireless network you need to type http://192.168.2.1 into your internet explorer or click on the link in this message.
On the left menu click on security,
Down the box choose 64 bit WEP OR 128 bit WEP.
Select Automatically generate hex pairs using Pass Phrass by placing a tick.
Type in a Pass Phrass in the box and click Apply Changes.
It will open a new window with encription key.
Write it down and keep it a good place.
Close your browser and you are done.
Click on your network icon to search for wireless, when found your network SSID, double click to connect and a pop up window will ask for the encription key.
Type in the key and confirm it and that's all the game.
Hope that help.

If you mean the encription key, which technically is not a password, you may get it acessing to the router page with Internet Explorer. You will need your router's IP and a wired connection.

hope it helps

cheers