My camara has not been working as it use to .When i take a picture with my flash its bleech white and without my flash its bad quality.Also there is a grey block that says MF in the middle of the right hand side just above where the little hand comes up when it worns you to use your flash.What does Mf mean and how can i get ride of it ?Please help as there is a horse show coming up in 2 days and i need my camara to be working properly
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Two choices, if you have an SD card reader, take the card out of the camera, and put it into your card reader. If you don't have a reader, you can get cheap ones from Amazon or the like, just type "SDHC card reader".
If you still have the USB connecting cable for this camera, wire it up to your computer.
Then in "My Computer" (Windows), you can browse the SD card as if it were another hard drive on your PC. This means you can copy, delete, move photos from the card to your computer's storage device.
one suggestion is if they are still on the card,load them into your computer then open with a picture editing software and save them back to the card as a jpeg image.i have found this to work for me in many cases.hope this helps.
The flash will only fire if it is required on Auto mode, flash on mode means it will fire all the time Please rate our solutions and if you still have problems please call back for more ideas to help you
Thanks Richard Scott Technical Support New Zealand
I gave the lense part of the camara a moderate slap, and the camara has worked fine since. looks like a lot of people have the same problem. Most of the people call it black screen problem. the shutter gets stuck. Tap it a few times on the side of the lense part of the camara moving it from bright to dark objects back and forth.
I use my Sony camaras (F55) with the PCMCIA card adapter. It works great. But now I'm switching from a powerbook to an iBook so I have to get a PCMCIA USB reader!! For you, I'd get the USB PCI card that goes into your mac and then find drivers for the Sony camara if they have them for the mac. Otherwise, go the PCMCIA reader route.