Question about Garden

2 Answers

AHS 4-16 Bosch hedgetrimmer

I have the above split open. Two problems have occurred. I have browsed for a parts blowout plan but no luck.

First, a spring suddenly popped out and is approx. 1" long. I think its for the squeeze trigger on the handle but cant see where it goes.
Second, the bushing on the bottom side, [looks a bit like a hat with no lid] also fell off. I have put that back on and it slots in well. It does not appear to fit the other way round. Is that right? Thankyou for any help.

Posted by on


2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

There is a small protusion in the plastic of the handle that acts as a seat for the spring. If you look carefully it is suddemly very obvious. The same is true with the soring for the upper handle.

Posted on Sep 10, 2012

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.


    An expert whose answer gotĀ voted for 20 times.


    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 76 Answers

You can try and in the search box enter your model numberand hopefuly that will help you on a break-down for your machine. Your welcome in advance if it worksif it doesn't let me know and I will need the model # and serial # and I will look again for you.

Posted on Mar 02, 2009


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

I have a Bosch hedge trimmer AHS 52 LI and yesterday when I tried to fit the battery to the trimmer it would not fit

Make sure that you are using the right battery, positioning it right to match how it goes the receptacle. Last thing is do not be afraid to give it a good push in there. New ones in particular have a firm seating which can take a little bit to get it in.

Feb 20, 2015 | Bosch AHS 52 Li Cordless Hedge Trimmer

1 Answer

How to open a Bosch AHS 4-16 Hedge Trimmer ?

Not sure how to open it - if engine runs but clutch doesn't engage on revving perhaps the clutch has seized... point to bear in mind though is if you can't open the gear box (don't know how to) you most certainly won't be able to change a part inside - you will just get fiddly bits everywhere and never get them back where they should be - best get a pro to give you their opinion on whether it is worth the cost of getting it fixed.

Sep 22, 2014 | Bosch Ahs4-16 42Cm 390W Electric...

2 Answers

My Bosch AHS 45 16 electric hedge trimmer start, is there anything you can suggest?

Hi Dan Walsh, When an electric motor won't start, it could be an open temperature device in the winding of the motor itself. If you have brushes and they are worn, then one or maybe two of the brushes can't stay inside the brush holder. They are spring loaded and if worn out can pop out. Also, if the winding are open, then there is not continuity. This will cause the condition you described. Not the best news, but it might answer your question.
Good Luck!

Jun 03, 2014 | Bosch AHS 45-16 Electric Hedge Trimmer

1 Answer

AHS 4-16 Bosch hedgetrimmer. Where can I find an exploded schematic, or even a photograph of the internals? Thanks

Go to Bing on your computer type in what you need and they help you there look at pictures and tell you about it.

Sep 08, 2012 | Ace Hardware Garden

2 Answers

Where can I order an upper spray arm for my bosch dishwasher

Hi -

I order all Bosch parts direct from Bosch. You wont get them much cheaper anywhere else. If the model number above is correct, the part number is 359976. This is the whole upper spray arm assembly which clips onto the upper basket. The arm and retaining nut are not sold separately.

(0614 is the position number in the parts list, not the part number)

$21.60 + shipping (in stock)

The link is for the Bosch USA eShop. If you are somewhere else, please let me know your location and I'll provide a different link. If you have a different from the one listed above, I can verify the part number for you, but this fits most Siemens/Bosch dishwashers, so it's likely to be the correct part..

Hope this helps.


Mar 24, 2011 | Bosch SHU5316UC Dishwasher

1 Answer

I have a Bosch AHS 42-16 Electric Hedgetrimmer . I don't like its 'hard wired cable' and I wish disconnect this and insert a safety 'easy disconnect' plug. My problem is knowing what type of 'star key' I...

Go to your local home center, or a hardware/tool store, or even Harbor Freight. For less that $10 you can buy a kit that has a screwdriver handle and the 'forbidden' bits for screws that manufacturers use to keep you from working on your own equipment. Some are called "Torx" but there are others too. If you can take the equipment with you, you can be certain to get what you need. Now that I've shared this secret, please don't electrocute yourself -- unplug before your unscrew! Good luck.

Aug 16, 2010 | Garden

1 Answer

Bosch Hedge Trimmer AHS 4-16 Starts now and

sounds like you will need to replace starter pulley in the starter cover assy and check that the starter pawls are free to move and the pawl springs are no broken or the pawls are frozen

but your problem is most likley starter pulley

remove the starter cover and check the starter pulley

worn or damage teeth on pulley may be quite evident

cheers pauly46

Sep 19, 2009 | Garden

1 Answer

Bosch wfk2801 washing machine drum does not rotate

Remove rear panel and check the belt is o/k, if it is, then remove belt, undo 2 bolts that hold motor, unplug the motor connector, lever motor back with a screwdriver, and remove motor.
Check the brushes, they should be at least 5mm long, \any shorter, then replace.
Plz rate my solution.

Jan 11, 2009 | Bosch Axxis+ WFR 2460 Front Load Washer

Not finding what you are looking for?
Garden Logo

Related Topics:

421 people viewed this question

Ask a Question

Usually answered in minutes!

Top Garden Experts

Dennis Key
Dennis Key

Level 3 Expert

2478 Answers


Level 3 Expert

666 Answers

john h

Level 3 Expert

12744 Answers

Are you a Garden Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides