Question about Phones

1 Answer

I have purchased a new handset nokia and people cant hear me but i can hear them its very annoying~!

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 3 Answers

It sounds to be a microphone or IC interference problem. If possible provide me your mobile serial no. and IMEI no. so that I can track your firmware update. Maybe it would solve ur problem.
Reply @ esys_and@yahoo.co.in
Bye!
Abhishek

Posted on Nov 05, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I cant dial out it says register HS i am not familiar with the procedure.


When you reset a handset (or if you buy a new one1, that handset displays a Handset Not Registered message. If you see this message on a handset, you need to register it to a base before you can use it.
Registering a handset
Does the handset fit in the base cradle?
Yes
No
Place the handset in the base.
The display should say Handset Registering.
1. On the base, open the menu and select Register Handset. The display should say Handset Registering.
2. On the handset you want to register, press and hold # until the handset display says Handset Registering (about 2 seconds).
In about 30 seconds, the handset display should say Registration Complete. Press TALK ( )/FLASh and make sure you get a dial tone. page29image32024
27
If...
Try...
- you don't hear a dial tone- the display says Registration Failed
Making sure the handset is fully charged, then start over at step 1.
To register a handset to a different base, see the section "Expanding Your phone" in the user's guide for the other base.

Mar 18, 2014 | Uniden DECT 6.0 Cordless Phone ID

1 Answer

THEY CANT HEAR ME


since the other person can hear you well, i dint think there is a problem with the battery.. there might be a problem with the network, or the handset.. its good that u check it out withthe manufacturer, if it has a customer cover.. good luck!!

Sep 25, 2009 | Uniden Phones

1 Answer

How to remove Uniden handset from base


The brillian people at Uniden don't feel it necessary to provide this type information in their manuals. You have to trial and error to find it, but what can you do. All you have to do to reset the base unit itself is to unplug the power, then while holding down the delete key, plug it back in. Hold the delete button down until you hear a beep, which indicates it has reset. Now you can readd handsets and they will start at 1.

Mar 08, 2009 | Uniden TCX905 Cordless Expansion Handset

1 Answer

Handset problem


It sounds like you have a defective handset cord or handset. First, at your phone, switch your handset with another phones handset that you know for sure works. From your phone make a test call. If the caller can now hear you, the original handset from your phone is defective. If the caller still can not hear you, switch your handset cord with another handset cord from another phone that you know works. From your phone make another test call. If the caller can hear you, then your original handset cord is defective. You can purchase another handset cord from your local office supply store. Your phone uses a standard handset cord. It may be difficult to match the original color of your handset cord. Be sure to take your defective handset cord with you, so you can try to match the color. If the caller still does not hear you. Put your original handset and original handset cord back on your phone. Then plug your phone in to another wall jack, that you know works with another phone. The other phone needs to be an identical phone to yours (same number of buttons and same model number. The model number can be found under the phone). Wait approximately 90 seconds, sometimes longer, after you plug your phone into the other wall jack. Now, make another test call from your phone. If the caller can now hear you from your phone with it plugged into another working jack, then you have a defective station port or jack where your phone was originally plugged in at. If the caller still can not hear then you have a defective phone.

Nov 19, 2008 | NorStar M7208 Corded Phone

3 Answers

Tesco ARC200 Cordless DECT Phone


[ARC20x User Guide p20: 11 Handset Registration]
To register a new handset:
  1. Press and hold the HANDSET LOCATOR on the base unit until you hear Registration tone (repeated 'beeps')
  2. On the handset, press the PROG then the UP or DOWN button to display "REGISTER"
  3. Press the PHONE/OK
    -> The display shows "BS 1234". If any of these numbers is steady (not flashing), then the handset is already registered to that base unit.
  4. Press 1 to select base unit number 1
    -> The display shows "BASE PIN _ _ _ _"
  5. Key in the system PIN (default 0000) and press the PHONE/OK
    -> The display shows "WAIT _ _ _ _" for a few moments, while the handset searches for a base. Then it shows a list of handset numbers which are still free on the base unit.
    (For example, "1 34 6" indicates that numbers 1, 3, 4 and 6 are free; 2 and 5 are already assigned to other handsets.)
  6. Key in a free handset number
    -> After a moment, the display should show the handset's name and number.
If registration fails...
  • Try again, making sure you begin step 2 as soon ans Registration tone starts.

Nov 08, 2008 | Uniden Cordless Phone

4 Answers

Handsets are saying searching can not use the phone


This is a portable home telelphone. I removed the batteries, waited a few minutes, and replaced the SAME batteries. Now the phone works perfectly. Maybe it needed to be reset?

Oct 16, 2008 | Uniden Cordless Phone

1 Answer

Problems with C110 & A110 Vtech Mirage Dect Home phones


Have strangely got the same problem - about the same time you posted this, but intermitently. I have isolated that the problem is in fact the handset itself, not the base unit. I eliminated a problem with the base unit by a) registering a different DECT phone to it. - The base still works fine. b) Leaving the handset switched off for an hour or so (press and hold the "OK" botton to switch off / on); then whislt it was working, registering the handset to a different base (Base 2). And guess what, after 30 mins the "BASE 2" message started flashing on the faulty handset.
So, if you already have an A110 extension handset, make sure it's also registered to base 1 and maybe try to get just the handset repaired via VTECH. (or just buy a new handset if they are available).

Jun 21, 2008 | Vtech 5.8GHz Cordless Phone with Digital...

1 Answer

Uniden cordless phone - model DSS7855


Press and hold "end" and "#" for more than 5 seconds this will de-register your handset without the base unit.
Bobby@welleasy.com
see for more info. http://www.uniden.com.au/RESOURCES_MAIN/pdfs/ELITE8805_OM.pdf

Jan 21, 2008 | Uniden Cordless phone EXS9950

2 Answers

Cordless phone keeps reading, "lift handset"


This would normally happen when the cordless handset was still in the charger stand. Are you saying it will still tell you to lift the handset after it's removed from the charger stand or base? I would not waste money buying a new battery as it is most likely not the problem but if you have more than one handset you should try swapping batteries. Removing and re-inserting the battery may reset the phone and clear up the problem as well.

Jul 05, 2007 | Coby CT-P8700 Phone (CTP8700)

Not finding what you are looking for?
Phones Logo

Related Topics:

58 people viewed this question

Ask a Question

Usually answered in minutes!

Top Phones Experts

kakima

Level 3 Expert

96333 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Cindy Wells

Level 3 Expert

4751 Answers

Are you a Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...