Question about Flat Panel Televisions

1 Answer

Plasma Spares http://www.fixya.com/transcript.aspx?cnvid=30400 Had the above chat with you but the store you said would supply the board has not got one and so far not responded to my mails is there another place I can purchase it?

Posted by on

  • 1 more comment 
  • ckchamb Nov 05, 2008

    Eagle 338, no joy with these people either. Anymore ideas!



    Thnaks

    ckchamb

  • ckchamb Nov 13, 2008

    Eagle 338



    Still no joy with the Plasma PSU, anymore suggestions as to where I can purchase one?



    Thanks

  • ckchamb Nov 16, 2008

    Eagle the power supply you told me to get is not inside the plasma. Good job i could not source one. I think this merits my money back as this has proved fruitless!!!!!!!!!



    I trust I will be recieving my money back following this waste of time!!!!

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 4,889 Answers

You can try getting it from here..
http://meratv.googlepages.com/plasmalcdparts
Let me know if you got it..

Posted on Nov 04, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My Philips 50" plasma screen won't work. the sound


It can be the power supply, Z-sustain boards failures due to bad caps, blown fuses. Yopu should alos check the Y-SUSTAIN board also.

You can see what the boards look like here:
http://www.shopjimmy.com/catalogsearch/result/?q=Philips+50PF9631D+

Basic LCD monitor and TV troubleshooting guide:
http://www.fixya.com/support/r5093881-lcd_flat_panel_tv_troubleshooting_guide
http://www.fixya.com/support/r6150077-basic_lcd_monitors_troubleshooting
http://www.fixya.com/support/r7406380-tv_training_manuals
Failed TV and Monitors: http://s807.photobucket.com/albums/yy352/budm
Learn about bad caps: http://en.wikipedia.org/wiki/Capacitor_plague
Parts: www.shopjimmy.com
Capacitors kit: http://lcdalternatives.auctivacommerce.com/Default.aspx he can make you a set of caps.
Or www.digikey.com, just make sure to use caps with low ESR, 105c, high ripple current and long life rating such as PANASONIC FM or FC series.
Please post back what you find.
Please leave rating if it helps.

Jan 21, 2011 | Philips 50PF9631D 50 in. HD-Ready Plasma...

1 Answer

I don't know what the fault is, just went off and into standby, now when switched on the screen comes on green for a couple of seconds then goes back into standby with the standby light flashing 5 times, I...


From Googling it seems to be the power supply problem.

http://www.fixya.com/support/t317402-pdp_5030

Most failures in PLASMA TV are due to failed power supply, Y and Z sustain boards. So check all three boards for shorted circuits, blown fuse and caps. You may want to download any one of the PLASMA TV training manuals to learn about PLASMA TV since the operating principles are about the same.

Basic LCD monitor and TV troubleshooting guide:
http://www.fixya.com/support/r5093881-lcd_flat_panel_tv_troubleshooting_guide
http://www.fixya.com/support/r6150077-basic_lcd_monitors_troubleshooting
http://www.fixya.com/support/r7406380-tv_training_manuals
Failed TV and Monitors: http://s807.photobucket.com/albums/yy352/budm
Learn about bad caps: http://en.wikipedia.org/wiki/Capacitor_plague
Parts: www.shopjimmy.com
Capacitors kit: http://lcdalternatives.auctivacommerce.com/Default.aspx he can make you a set of caps.
Or www.digikey.com, just make sure to use caps with low ESR, 105c, high ripple current and long life rating such as PANASONIC FM or FC series.
Please post back what you find.
Please leave rating if it helps.

Jan 21, 2011 | Pioneer PureVision PDP-503HDE 50 in....

1 Answer

Tv will not power up, and before it stopped it ha a green vertival bar on the left side of the screen.


You probably has X left drive board problem and also the power supply module. I would check out all of these boards at the same time for blown fuses, ICs, caps in the power supply, X drive left, center, right ICs, Z- sustain, and Y sustain boards.
Parts: http://www.shopjimmy.com/catalogsearch/result/?q=Magnavox+42MF231D+

Please post back what you find.
http://www.fixya.com/support/r5093881-lcd_flat_panel_tv_troubleshooting_guide
http://www.fixya.com/support/r6150077-basic_lcd_monitors_troubleshooting
http://www.fixya.com/support/r7406380-tv_training_manuals
Failed TV and Monitors: http://s807.photobucket.com/albums/yy352/budm/
Learn about bad caps: http://en.wikipedia.org/wiki/Capacitor_plague
Parts: www.shopjimmy.com
Capacitors kit: http://lcdalternatives.auctivacommerce.com/Default.aspx he can make you a set of caps.
Or www.digikey.com just make sure to use caps with low ESR, 105c, high ripple current, long life rating such as PANASONIC FM or FC series.

Please leave rating if it helps
Plasma TV is a lot more complex than LCD flat panel TV.

Jan 18, 2011 | SNK Magnavox 42MF231D 42 in. Plasma TV

1 Answer

Nothing comes on, just the little red light.


Right now the 5vdc standby power supply is working, but the power supply may have failed due to bad caps or it is in shutdown mode due to shorted circuits.
Please check the fuses, caps in the power supply, Z-SUSTAIN BAORD, and Y-SUSTAIN board, these are commonly failed boards in PLASMA TV.

Basic LCD monitor and TV troubleshooting guide:
http://www.fixya.com/support/r5093881-lcd_flat_panel_tv_troubleshooting_guide
http://www.fixya.com/support/r6150077-basic_lcd_monitors_troubleshooting
http://www.fixya.com/support/r7406380-tv_training_manuals
Failed TV and Monitors: http://s807.photobucket.com/albums/yy352/budm
Learn about bad caps: http://en.wikipedia.org/wiki/Capacitor_plague
Parts: www.shopjimmy.com
Capacitors kit: http://lcdalternatives.auctivacommerce.com/Default.aspx he can make you a set of caps.
Or www.digikey.com, just make sure to use caps with low ESR, 105c, high ripple current and long life rating such as PANASONIC FM or FC series.
Please post back what you find.
Please leave rating if it helps.

Jan 18, 2011 | Pioneer PureVision Pro-1000HD 50 in....

1 Answer

How much does a new board cost for a 50 inch samsung plasma tv


I am not sure since you do not provide the model number.
You can try here to what the boards are at www.shopjimmy.com

Most failures are due to the power supply, Y-SUSTAIN, Z-SUSTAIN boards. Inspect those boards for blown fuses, caps, semiconductors.

Basic LCD monitor and TV troubleshooting guide:
http://www.fixya.com/support/r5093881-lcd_flat_panel_tv_troubleshooting_guide
http://www.fixya.com/support/r6150077-basic_lcd_monitors_troubleshooting
http://www.fixya.com/support/r7406380-tv_training_manuals
Failed TV and Monitors: http://s807.photobucket.com/albums/yy352/budm
Learn about bad caps: http://en.wikipedia.org/wiki/Capacitor_plague
Parts: www.shopjimmy.com
Capacitors kit: http://lcdalternatives.auctivacommerce.com/Default.aspx he can make you a set of caps.
Or www.digikey.com, just make sure to use caps with low ESR, 105c, high ripple current and long life rating such as PANASONIC FM or FC series.
Please post back what you find.
Please leave rating if it helps.

Jan 17, 2011 | Samsung 50 in. Plasma TV

1 Answer

No picture


PLASMA TV's do not use backlights inverter board since it does not use CCFL for lighting.
Common boards that go out in the PLASMA TV are the power supply, Z SUSTAIN BD, Y SUSTAIN BOARD.
Inspect those boards for blown fuses and caps.
Please read the PLASMA TV training manuals to learn more about the TV.

If you are going to DIY and have proper tools, electronics knowledge, and know safety precaution then please read on:

Basic LCD monitor and TV troubleshooting guide:
http://www.fixya.com/support/r5093881-lcd_flat_panel_tv_troubleshooting_guide
http://www.fixya.com/support/r6150077-basic_lcd_monitors_troubleshooting
http://www.fixya.com/support/r7406380-tv_training_manuals
Failed TV and Monitors: http://s807.photobucket.com/albums/yy352/budm
Learn about bad caps: http://en.wikipedia.org/wiki/Capacitor_plague
Parts: www.shopjimmy.com
Capacitors kit: http://lcdalternatives.auctivacommerce.com/Default.aspx he can make you a set of caps.
Or www.digikey.com, just make sure to use caps with low ESR, 105c, high ripple current and long life rating such as PANASONIC FM or FC series.
Please leave rating if it helps.
Please post back what you find.

Jan 11, 2011 | Sanyo DP42746 42 in. Plasma Television

1 Answer

I have a 2 year old Samsung 50 Plasma HD TV with sound but no picture???


Please check the power supply, Z-SUSTAIN board, Y-SUSTAIN board for blown fuses, bad caps first. You can download the PLASMA TV training manual to learn about PLASMA TV by the link below.

Basic LCD monitor and TV troubleshooting guide:
http://www.fixya.com/support/r5093881-lcd_flat_panel_tv_troubleshooting_guide
http://www.fixya.com/support/r6150077-basic_lcd_monitors_troubleshooting
http://www.fixya.com/support/r7406380-tv_training_manuals
Failed TV and Monitors: http://s807.photobucket.com/albums/yy352/budm
Learn about bad caps: http://en.wikipedia.org/wiki/Capacitor_plague
Parts: www.shopjimmy.com
Capacitors kit: http://lcdalternatives.auctivacommerce.com/Default.aspx he can make you a set of caps.
Or www.digikey.com, just make sure to use caps with low ESR, 105c, high ripple current and long life rating such as PANASONIC FM or FC series.
Please leave rating if it helps.
Please post back what you find.

Jan 11, 2011 | Samsung SPN4235 42 in. Plasma HDTV

1 Answer

Screen is blank....powers up fine, sound comes through home ent. system, but no picture. cannot change input modes,no input display. repairable? what to do?


First of all, this is PLASMA TV, it DOES NOT use backlights inverter boards for the CCFL backlights.

Most boards that go out in the PLASMA TV are the power supply, Y sustain board, Z sustain board.
Look at those boards for bad caps, blown fuse, shorted semiconductors, etc.
It will not be cheap to repair.
You can download any one of the PLASMA TV training manuals to get some understanding how PLASMA TV's work.
If you are going to DIY and have proper tools, electronics knowledge, and know safety precaution then please read on:

Basic LCD monitor and TV troubleshooting guide:
http://www.fixya.com/support/r5093881-lcd_flat_panel_tv_troubleshooting_guide
http://www.fixya.com/support/r6150077-basic_lcd_monitors_troubleshooting
http://www.fixya.com/support/r7406380-tv_training_manuals
Failed TV and Monitors: http://s807.photobucket.com/albums/yy352/budm
Learn about bad caps: http://en.wikipedia.org/wiki/Capacitor_plague
Parts: www.shopjimmy.com
Capacitors kit: http://lcdalternatives.auctivacommerce.com/Default.aspx he can make you a set of caps.
Or www.digikey.com, just make sure to use caps with low ESR, 105c, high ripple current and long life rating such as PANASONIC FM or FC series.
Please post back what you find.
Please leave rating if it helps.

Jan 08, 2011 | Vizio JV50P 50 in. Plasma TV

1 Answer

Our plasma began emitting a bad electrical smell this evening. The tv now has sound but no picture. What has happened, and is there something we can do to fix it?


It can be the power supply board or the Y or Z Sustain boards have burnt up. It will not be an easy repair. You need to look inside.
You should read one of the SAMSUNG Plasma TV training manual to get some understanding how Plasma TV works.
You can download one of them here:
http://elektrotanya.com/?q=showresult&megnev=SAMSUNG%20&megnev2=PLASMA%20TRAINING&kategoria=tv&kat2=all

Basic LCD monitor and TV troubleshooting guide:
http://www.fixya.com/support/r5093881-lcd_flat_panel_tv_troubleshooting_guide
http://www.fixya.com/support/r6150077-basic_lcd_monitors_troubleshooting
http://www.fixya.com/support/r7406380-tv_training_manuals
Failed TV and Monitors: http://s807.photobucket.com/albums/yy352/budm
Learn about bad caps: http://en.wikipedia.org/wiki/Capacitor_plague
Parts: www.shopjimmy.com
Capacitors kit: http://lcdalternatives.auctivacommerce.com/Default.aspx he can make you a set of caps.
Or www.digikey.com, just make sure to use caps with low ESR, 105c, high ripple current and long life rating such as PANASONIC FM or FC series.
Please post back what you find.
Please leave rating if it helps.

Jan 07, 2011 | Samsung HP-R4252 42 in. Plasma HDTV

1 Answer

My screen is black but I still have sound. Serial # 808RMXX226794


There are at least 3 boards you need to check for fuses, caps, blown parts.
They are; power supply module, Z sustain board, and Y sustain board.
You may want to download the LG PLASMA TV training manuals to get some understanding about PLASMA TV first from my links below.

Basic LCD monitor and TV troubleshooting guide:
http://www.fixya.com/support/r5093881-lcd_flat_panel_tv_troubleshooting_guide
http://www.fixya.com/support/r6150077-basic_lcd_monitors_troubleshooting
http://www.fixya.com/support/r7406380-tv_training_manuals
Failed TV and Monitors: http://s807.photobucket.com/albums/yy352/budm
Learn about bad caps: http://en.wikipedia.org/wiki/Capacitor_plague
Parts: www.shopjimmy.com
Capacitors kit: http://lcdalternatives.auctivacommerce.com/Default.aspx he can make you a set of caps.
Or www.digikey.com, just make sure to use caps with low ESR, 105c, high ripple current and long life rating such as PANASONIC FM or FC series.
Please post back what you find.
Please leave rating if it helps.

Jan 06, 2011 | LG 50PG20 50 in. Plasma HDTV

Not finding what you are looking for?
Flat Panel Televisions Logo

Related Topics:

47 people viewed this question

Ask a Question

Usually answered in minutes!

Top Flat Panel Televisions Experts

The Knight
The Knight

Level 3 Expert

68153 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Jaime Hernandez

Level 3 Expert

2267 Answers

Are you a Flat Panel Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...