Question about Projection Televisions

1 Answer

I load paper and press ok , and the error pops up saying there is no paper . Load paper and press ok. I have a canon MX700, and yes I know how to load paper

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Trashed it and bought a new one... !!!

Posted on Nov 04, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Mitsubishi big screen model vs-50604. i hit a button on the front of the tv and now all i have on the screen is a caption that says installng guide plus data now. is there a reset on the tv anywhere. i...


Open the front panel. Just to the left of the RCA imputs is a small button that says reset. You may need to use a pen or paper clip to press it. Press that and the system will reset .That should fix your issue, or do like me and get a Sharp. LOL. My bulb went out 2 times and I got irritated with it.

Nov 07, 2013 | Mitsubishi VS-50605 50" Rear Projection...

1 Answer

What do you do to get the error codes?


try to reset the
  • 1
    Open the front panel by pushing on it. Pressing on the panel releases the lock and allows the front panel to pop open slightly. Pull the corner gently to open the panel completely.

  • 2
    Use a pointed object, such as the sharpened end of a pencil or the tip of a paper clip, to push the "System Reset" button.




  • 3
    Wait about one minute, or until the green LED light on the front panel display stops flashing.

  • 4
    Turn your television back on once the green LED light turns off.


God bless you

Jul 27, 2013 | Mitsubishi WS-55859 55" Rear Projection...

1 Answer

Disk wont load


If it says disc error, it is likely the lens. If disc wont go in, it is something mechanical. Try lens cleaner if you suspect the lens, but a faulty lens usually signals a need for repair. [new lens-part]

May 09, 2009 | Projection Televisions

1 Answer

HOW do you reset the timer>? the lights on front of the tv flash 3 gree then 2 orange. Says to replace lamp,which I did then reset timer...HOW?


press "menu" button, scroll down to "special features" and press "ok" button, scroll down to "reset lamp timer" and press "ok" button, you will notice the "no" change to "yes" and press "ok" button, you will notice "yes" change to "no", this will reset the lamp timer

Mar 20, 2009 | Vivitek V37655 56" DLP TV

1 Answer

Reseting lamp counter (LG)


Make sure the TV is on and:
1) Press and hold the Menu button on your TV SET
2) Press and hold the Menu button on your REMOTE CONTROL (at the same time)
3) Continue holding BOTH buttons down for 5 secconds or until the Service Menu pops up
4) Release the MENU button from your REMOTE CONTROL, then release the MENU button from the TV Set.
5) Press and hold ENTER (or OK) on the TV Set, then:
6) Press and hold MUTE on the REMOTE CONTROL (while still holding down the ENTER button on the TV SET
7) Holding both buttons down should lead to the Lamp Life Hours screen to pop up.
Release the MUTE button the REMOTE CONTROL, then release the ENTER (or OK) button on the TV Set.
9) Come back to this blog and post your HOURS on our site
10) Now press SELECT, then SELECT again to confirm the reset of the counter
** If the procedure above does not work swap steps 5 & 6.
** For a few special models (including 44SZ8D), you might have to change step 5 to:
5a) Press Enter on the TV Set to enter the Position Adjustment Screen
5b) Press and hold Enter on the TV Set (the TV should go back to the main Service Menu, continue holding Enter) and now also hold down the MUTE button on your REMOTE CONTROL. After about 5 seconds, your Lamp Life Counter should pop up.

Jun 30, 2008 | Projection Televisions

1 Answer

Hi I have a rca tv that has guide plus on it , But I have lost the remote and the demo keeps popping up. Is there a away to take it off without the remote control?


yes U can use volume up and down channels up and down and menu key as ok key look in the guide plus is and option to turn that of just play with if still having problems let me know and I' get the steps to get rid of

Apr 17, 2008 | Projection Televisions

1 Answer

Scenium DLP quit recognizing cable signal


You may have inadvertently pressed some buttons on the remote to take it out of the mode to receive cable channels.
If you unplug the tv from the wall for a while, it may clear the error.

Step 1: Identifying Your TV’s Location
1. If your country is highlighted, press OK on the remote control.
If your country isn’t highlighted, press the up or down arrow button on the
remote control to highlight your country and press OK.
2. Use the number buttons and/or the arrows on your remote to enter your
zip code or postal code. Press OK when you’re fi nished.
Note: If your postal code contains letters, press the up and down arrow
buttons on your remote to enter letters, and press the right arrow button
to go to the next space. The left arrow button also moves the highlight to
the left.
Step 2: Confi guring for Cable
The next series of screens asks you about your cable setup. To supply your TV
with the correct TV program listings, the TV Guide On Screen system needs to
know if your TV is connected to cable.
Note: If you’re using a cable box, always leave it on so you can receive
program information.
1. If your TV is connected to cable, highlight Yes and press OK.
If your TV isn’t connected to cable, highlight No and press OK. (STEP 3:
Confi guring for Antenna
appears–go to page 24).
2. If you have a cable box connected to this TV, highlight Yes and press OK.
Note: The next series of screens is very important because the TV Guide
On Screen system must fi nd the correct cable box information in order
to receive the correct TV program listings.
If you don’t have a cable box connected to this TV, highlight No and
press OK (STEP 3: Confi guring for Antenna appears–go to page 24).
3. Highlight the input where you connected your cable box to the TV, and
press OK.
If you select Cable Input, continue to step 4.
If you select any other option, go to step 5 on the next page.
Important Note: Your cable box can’t be connected to ANTENNA
INPUT if it is to be controlled by the TV Guide On Screen system.

try using the guidelines above.

Mar 25, 2008 | Projection Televisions

Not finding what you are looking for?
Projection Televisions Logo

Related Topics:

40 people viewed this question

Ask a Question

Usually answered in minutes!

Top Projection Televisions Experts

Jaime Hernandez

Level 3 Expert

2267 Answers

matt martin
matt martin

Level 3 Expert

1191 Answers

yadayada
yadayada

Level 3 Expert

60960 Answers

Are you a Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...