Question about PC Desktops

1 Answer

How do I access my speedtouch router administrastion interface

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

Open the EXPLORER in your machine and put 192.168.1.1 and enter .

Posted on Nov 03, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Speedtouch default password


That is located on the bottom of your router on a silver label next to your default SSID and other pertinent information. If, by chance, you've forgotten a password that you set, unplug the router (not just power off, remove from wall power) for 10 minutes then press tiny pinhole sized reset button on the back to restore factory defaults.

Dec 19, 2013 | PC Desktops

1 Answer

I have a thompson speedtouch 510 that works just fine but when i add my SPARKLan WRTR-141 it wont get connected neither by the computer or the laptop. i have 2 ethernet cables i added one end of the first...


Have you gone into the SPARKLan and configured it yet? It should be like this Speedtouch>SPARKLan>your computer in to the SPARKLan.
Turn on your new routers SSID so it can be "found" by the wireless devices. You should turn OFF the DHCP server in the Speedtouch and turn DHCP ON in the SPARKLan.

Hope this helps.

Jan 13, 2009 | PC Desktops

1 Answer

My Belkin 4 port router has the same IP as my Modem so my router will not detect my DSL connection. Ive asked Belkin for help but all they send me is gobblygoop!


Hi!
I'm sorry to hear that Belkin did not help you with your problem. Let me help you with your concern instead.

Here's what we need to do:

Start by resetting the router to factory default - you just need to press and hold the rest button on the router for about 30 seconds (with the power on).

1.) Disconnect the Belkin router from your modem , connect a PC to the router (use the LAN port - either port 1 to 4).

2.) Open Internet browser - clear the address bar and type in http://192.168.2.1 , press enter. It will ask you for a password , do not type anything just press Submit. You should be able to access the router's web interface.

The router's web interface should like this (depending on the model #):

92853d1.jpg



3.) Go to LAN settings. Change the router's IP address to 10.10.10.1 (this will be the new IP address of your router) . Apply the changes. Once youapply the changes, you can access the router using the new IP - http://10.10.10.1.

4.) Reconnect your modem - router and computers. Reboot device by switching off the modem , router and PC.

5.) Power up the modem first. Wait for about 2 minutes, power up the router and restart your PC.

The steps I gave is applicable if your modem is not on bridge mode. If your modem is on bridge mode (meaning it requires a username and password from your ISP) - access again the router by going to http://10.10.10.1 and do the following:

Click Internet WAN > Connection Type and select PPPOE. Type the username and password from your ISP. Apply the settings. Reboot the modem and router.


I hope that helps.

Good luck and have a nice day!

Nov 25, 2008 | Belkin PC Desktops

1 Answer

Belkin (F5D7050) 802.11a/g/b Wireless Adapter, home networking. I am on AOl using Thomson speedtouch, I am trying to link up 2 pc's and one laptop to access the net. Main Pc is Vista - with wireless...


try to reset the wireless router to factory default.( with out encryption). connected the Xp first. then the other two.
try to use simple encryption (8 characters).

Oct 12, 2008 | Belkin PC Desktops

1 Answer

Have belkin wireless/modem router, was using aol but now with the utility warehouse using there uwclub.net service. They sent a thompson speedtouch fixed line modem which we had to connect to get on i.e.,...


Try using a dynamic ip address. I think you only use the static if having problems. Just read this.

A dynamic IP address is assigned to a customer’s modem or router, generally via a remote server (such as our own UWClub server). This provides the user with an IP address from an available pool of addresses every time a connection is made. This is the most common type of IP address for our broadband/Broadcall customers.

Thats off The Utility Warehouse page.


Aug 04, 2008 | PC Desktops

2 Answers

How do i access the configeration set up of my router. It is a thomson speedtouch. Have got to it before but can not for the life of me remember how. cheers in advance steve


Try this
Proceed as follows:
1 Open a Web browser.
2 In the address bar, type your SpeedTouch™’s IP address or DNS host name
(http://speedtouch.lan or 192.168.1.254 by default)
The SpeedTouch™ Home page appears, from where you can navigate to all
the configurable aspects of the SpeedTouch™.
For more information on the Web pages, see “4 SpeedTouch™ Web Interface” on
page 21

Mar 25, 2008 | PC Desktops

1 Answer

Wireless routers


most routers are compatible with many of the ISP's, due to conventions for use..you may want to go on google, and do a comparison..

I have some links to the big three, here, if you'd like to evaluate them from a technical standpoint.

Mar 25, 2008 | PC Desktops

1 Answer

Netgear connection problem


After you connected the new router to your modem (using the WAN connection on the router) did you restart the modem? Try restarting the modem and the router.

Mar 10, 2008 | PC Desktops

Not finding what you are looking for?
PC Desktops Logo

Related Topics:

50 people viewed this question

Ask a Question

Usually answered in minutes!

Top PC Desktops Experts

joecoolvette
joecoolvette

Level 3 Expert

5660 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18298 Answers

Are you a PC Desktop Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...