Need a user manual for a toshiba l300d laptop

if yr laptop still can logon, recover yr system use system recovery on yr laptop, if not use cd recovery or recovery partition on yr laptop hard disk

I have come across this issue in a number of Toshiba laptops recently. The DC jack assembly (which includes a wiring harness and the DC jack) actually breaks away from the bottom laptop housing. What I have done is to glue the jack back in place using a hot glue gun. You need to be careful and observe how the right speaker (located on the top housing) is situated. Be liberal on the glue and make sure the jack is encased in the glue. I have not had any units returned after this was done.

Good luck

You can easily and carefully disassemble the notebook and depending on your model some come with a cable that can be purchased and replaced, if its part of the motherboard then you would have to get someone to get it back on it or replaced the motherboard, if its a manual fix it might not always work.

The BIOS password maybe able to be removed provided this laptop had a LPT printer port.
For details of a BIOS password dongle, please click on this link and follow my instructions :-
http://www.fixya.com/support/r4350719-remove_toshiba_bios_password

Go to this link on another PC, download all of the drivers related to Windows XP and burn them to a CD. Run the drivers from the CD on the Satellite.

http://www.csd.toshiba.com/cgi-bin/tais/support/jsp/modelContent.jsp?ct=SB&os=&category=&moid=2221251&rpn=PSLC8U&modelFilter=L300D-ST3501&selCategory=3&selFamily=1073768663

Make sure that the ventilation system (fans) is working

If your laptop is only 3 months old it should be covered by warranty with Toshiba, the best course of action would be to consult them regards this issue.

Follow the link below for the drivers
http://www.drivershq.com/Drivers/Toshiba/SATELLITE-PRO/L300D-EZ1003X/4183/10934/37667/Drivers.aspx
Mark

restart in bios setup
then click to default settings press f10 to save and exit
if problem persists let me know
don't forget to rate

http://explore.toshiba.com/laptops/satellite-pro/L300
this shows all the l300d models at the bottom and what the card is in it. I would get the newest available for speed, and reliability. it is N. an N router will be backward compatible with B, G, and A