Question about Sampo PME-42S6 42 in. HD-Ready Plasma Television
I think this TV had a quality issue. I had the same problem [sounds the same anyway]. It was an assembly issue. the circuit board in the middle twards the bottom was wedged in but not flat. the bend eventually caused the same type symptons. I removed the board, applied presure over a couple days, heated the board with hair dryer and finally got the board to flatten somewhat. Also had to file one edge of the board to get it to set flat in its slot. Has worked since [over 3 years]. I do not recommend doing this unless you are prepared to throw it out, since this is very unorthodxed.
Posted on May 29, 2010
Tips for a great answer:
Jul 19, 2013 | Vizio VF550M 55 in. LCD HDTV
Feb 21, 2008 | Samsung HP-R5072 50 in. Plasma HDTV
Nov 30, 2009 | Sampo PME-42V3 42 in. Plasma Television
Mar 09, 2009 | Sampo PME-42S6WT 42 in. HD-Ready Plasma...
Jan 08, 2008 | Flat Panel Televisions
106 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: