Question about Tricity Bendix 24 in. DH102 Free-standing Dishwasher

1 Answer

Tricity bendix dh101

The dishwasher will not fill up with water

Posted by on

  • gopub Feb 09, 2009

    tricitybendix, dh101 will not fill up with water

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Tricity Bendix Master
  • 19,396 Answers

Check pressure from power supply, check if the inlet valve is faulty or obsstructed.


If you enter model number here , you can find parts and diagrams.

Posted on Dec 08, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Bendix bdw53 dishwasher pump not working?


Don't try it at home, please contact authorized service center. It may be hazardous, Please don't use it before Authorized Service Professional fixes it.

Apr 23, 2014 | Tricity Bendix 24 in. BDW53 Free-standing...

1 Answer

Hello my tricity bendix dishwasher won't take in water, it will pump it out and when I turned water off at the mains and disconnected the water pipe and put it in a bucket turned mains back on the...


Hi

When the Dishwasher won't fill you'll need to check for the water inlet hose, the water inlet valve and the float switch assembly. When the water fills your dishwasher, a float rises along with it. As the float reaches a certain threshold level, it shuts off the flow of water, thereby preventing a leak. Sometimes the float can get stuck in the wrong position in your dishwasher, and it can prevent your dishwasher from filling. Sometimes it can happen due to float valve and on other occasions due to float switch. Inspect the water hose coming to the dishwasher for any blockages. If the hose is not clogged then check the water inlet valve for any clogs, if the water will not even fill for few seconds then certainly the water inlet valve is bad and should be replaced. You can also use a multimeter to check continuity on inlet valve. If you don't get any value on the multimeter then you'll need to replace the water inlet valve assembly. However, if the valve is fine then the float switch assembly should be replaced. Hope this helps... Please post back if you need more information.

Daniel

Aug 11, 2011 | Tricity Bendix 24 in. DH102 Free-standing...

1 Answer

I have a tricity bendix dh101 stopped working cold water not going in to manchaine many thanks if u can help


Possible that the INLET valve is faulty /clogged or there is no voltage to switch ON the inlet valve.
So measure the voltage at the inlet valve, also check if the inlet filter is clogged.
Check the water pressure at the inlet to confirm, remove the line from the inlet valve and confirm the flow when activated.

Aug 08, 2011 | Tricity Bendix Dishwashers

1 Answer

I have a Tricity DH101 replacement element, but can't see how I remove the old and replace it with the new one, do I have to do this from beneath the unit?


No. You need to remove the perforated floor of the machine to access the heater element, and you need to remove the rear cover to disconnect the wires. Once you have access to these points the job is actually very easy. Make sure that the power cord is removed from the wall socket before attempting any work on the machine.

Jun 25, 2011 | Tricity Bendix Dishwashers

1 Answer

Dishwasher CDW101 not filling with water




Hi,


Here is a tip that will help you to find out why water will not come into the dishwasher...

Dishwasher Trouble
No Water entering Dishwasher

heatman101

Jan 28, 2011 | Tricity Bendix 18 in. DH090 Free-standing...

1 Answer

Solve Your


I have spent most of the afternoon looking for the float etc. In frustration I upended the machine to look for the inlet hose point, water started pouring out so I put the machine back in the upright position. Now it's filling with water and working again. Maybe there was something in the hose which became free with upending it. Not sure, but worth a try, it worked for me!

Mar 11, 2010 | Tricity Bendix 18 in. DH090 Free-standing...

1 Answer

Tricity bendix dh101 wont empty trying to but only a trickle was working ok no kinks in extract pipe


Check the drain hose and the drain lines, if you find no obstructions, then you have a defective drain pump.

If you find no problem with the drain lines, you may need to replace the pump.

If you enter model number here , you can find parts and diagrams.

Dec 08, 2008 | Tricity Bendix 24 in. DH102 Free-standing...

2 Answers

Tricity Bendix DH101 dishwasher


my tricity bendix dh101 will not fill up with water what could be the problem

May 09, 2008 | Tricity Bendix 24 in. DH102 Free-standing...

1 Answer

My Tricity Bendix won't work


Check out the water inlet solenoid valve if this is clicking then it is probably the water level pressure switch which appears to be controling the flow of water mechanicaly dependent on whether the water is high enough in the machine and therefore giving enough pressure to close the switch .This may be stuck closed.

Oct 17, 2007 | Tricity Bendix 24 in. DH102 Free-standing...

Not finding what you are looking for?
Tricity Bendix 24 in. DH102 Free-standing Dishwasher Logo

Related Topics:

367 people viewed this question

Ask a Question

Usually answered in minutes!

Top Tricity Bendix Dishwashers Experts

kakima

Level 3 Expert

96681 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Brad Brown

Level 3 Expert

13569 Answers

Are you a Tricity Bendix Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...