Question about Durabrand HT-3915 System
My sister purchased a welcome home gift from Iraq it was the Durabrand HT-3915. I blew a fuse in it and bought severl new one 1.6 250v type "T" fuse the one that it says to use. Now when I turn it on all the lights on the front are illuminated. I'll turn it off and back on again and then only 4-5 lights are illuminated. I'm not sure what the problem is could you please help me? Thanks
The easiest thing to do would be to go to an electronics store, look on the back of the remote control package and look for Durabrand.
It should come with a booklet with the setup codes.
Thats all I got for now.
Hope that helped, good lukc, please rate.
Posted on May 10, 2008
Your regular TV set must be able to process the surround encoding through its output to where the Durabrand is taking the sound from.
Also, if you are using the TV set on a converter, Cable Box, or Sat receiver, and you are not taking the output from the component output there will be no surround from the source.
Surround sound is critical to how it is processed and applied.
Posted on Feb 23, 2009
Look here. They say it's not available.
ditto on eBay, just replacements...
Keep searching. I've seen some whole systems appear on eBay for the cost of just a remote.
Posted on Jun 19, 2011
SOURCE: I need a fuse for
any electronics store will have that , so will radio shack, or if you have a FRY's near you, they are pretty common so you should be able to locate one pretty easy
Posted on Aug 23, 2011
Tips for a great answer:
Jun 23, 2011 | Durabrand HT-3915 System
Jun 19, 2011 | Durabrand HT-3915 System
May 24, 2011 | Durabrand HT-3915 System
Apr 10, 2011 | Durabrand HT-3915 System
Mar 27, 2011 | Durabrand HT-3915 System
Feb 11, 2011 | Durabrand HT-3915 System
Dec 23, 2009 | Durabrand HT-3915 System
Mar 15, 2009 | Durabrand HT-3915 System
May 10, 2008 | Durabrand HT-3915 System
34 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: