Question about Toshiba Satellite A55-S1063 Notebook
When my laptop starts up I get 2 errors. The first says: CFSServ - Listen Error. I press OK. I then get: CFSServ - Recv Socket InitConnect Error. I press OK. I have SBC Yahoo DSL - SBC says the line is good. I have a Belkin Wireless Router (802.11b, v 2000) - Belkin says the router is good and that the fact that I'm having wireless issues is that there is a known Toshiba problem with the wireless not working. How do I get my wireless working again? It was working 3 weeks ago, then nothing.
The process erroring out has to do with the Toshiba wireless settings. http://www.liutilities.com/products/wintaskspro/processlibrary/cfsserv/ "cfsserv.exe is a process belonging to Toshiba's ConfigFree utility and searches for Wireless Devices. This program is a non-essential process, but should not be terminated unless suspected to be causing problems." I would attempt to completely un-install this utility and then re-install it. After re-installing this utility, make sure the wireless setting on your Toshiba and your wireless router match exactly. If you have trouble using the Toshiba utiliy, you can always try the built in Window utility (that is if you have Windows XP Service Pack 2 installed).
Posted on Sep 29, 2006
Tips for a great answer:
May 04, 2011 | Acer Aspire 5600 Series 5630-6951 Laptop
Mar 15, 2011 | PC Laptops
Feb 13, 2011 | PC Laptops
1. Error: BOOTMGR is missing:
• The following error opens when attempting to start the PC:
??¢ If you recently installed an additional hard drive, turn off the computer and remove the drive before using the following steps:
??¢ Open HP System Recovery:
??¢ CAUTION: Do not perform a system recovery! Stop at the first recovery screen.
- Press the F11 key repeatedly while the computer is starting.
- If you have a recovery disc, turn on the PC and insert the first recovery disc into the drive. Use the disc to enter the system recovery.
??¢ Select Microsoft Startup Repair tool and wait for repair to find and fix errors. When finished, restart the computer; even if the startup repair tool finds errors but cannot fix them.
??¢ If the error message persists, open the recovery manager screen as was done in step 1.
??¢ At the recovery manager screen, press ALT + D.
??¢ Enter the following text at the command prompt: bootrec /rebuildbcd
??¢ If bootrec displays "Add installation to boot list?", press y .
??¢ After bootrec completes successfully, the computer displays "The operation completed successfully".
??¢ To close the command prompt, enter the following text: exit
??¢ At the Recovery Manager screen, select Microsoft Startup Repair tool (again) and wait for startup repair to find and fix errors. When finished, restart the computer.
??¢ The error should no longer open. If it does, perform a system recovery, making sure to backup important files.
??¢ If you removed a hard drive before using these steps, replace the drive. If the error occurs again, make sure the additional hard drive is not set as an active drive. Only the main bootable drive should be set as active.
Dec 12, 2010 | HP Pavilion Ze4900 Notebook
Nov 02, 2010 | Acer Aspire 5315 Notebook
Sep 11, 2010 | IBM ThinkPad T40 2373 Notebook
Sep 04, 2010 | HP Pavilion dv7-1130us laptop
Nov 12, 2009 | HP PC Laptops
149 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: