Question about SkyScan 86742 Digital Atomic Wall Clock

Open Question

How to set time date year and day for model 86742

How to set the time-date and year for this clock ?





































Posted by on

3 Suggested Answers

jyackle5
  • 8197 Answers

SOURCE: how do you set the alarm on model 86742?

TO SET ALARM:

Press mode to go to alarm screen (AL shows above temp)

Hold the alarm on/off button for about 5 seconds and the hour will flash.

Press the adjust button to change the hour.

Press the alarm on/off button again to move to minute

Press the adjust button to change the minutes

Press the mode key to save and exit
Good Luck and please rate 4 thumbs for the free answer

Posted on Apr 23, 2010

gopakumarg43
  • 72670 Answers

SOURCE: manual for SkyScan atomic clock -model 86742 I

Hello

The SkyScan ATOMIC Clock

With the Skyscan Atomic Clock, you have the most accurate timepiece within the continent. It can receive the time signal transmitted by the National Institute of Standards and Technology (NIST), which is regulated by 3 atomic clocks and deviates less than 1 second within 3,000 years. The NIST broadcasts the time signal (WWVB, 60kHz) continuously from Fort Collins, Colorado. This signal can be received anywhere in the continental USA that long wave (AM) radio reception is possible with a portable radio. It is expected that the signal can cover a distance of over 2,000 miles from the transmitter. Therefore, your clock will receive the signal within the broadcast range anywhere an AM signal can be received; generally the signal cannot be picked up in massive metal and concrete structures unless near a window. In addition, some environmental effects (see next page) may affect the transmitting distance.

Posted on Nov 10, 2011

gopakumarg43
  • 72670 Answers

SOURCE: How to set the time for SkyScan 86742?

Hello
http://www.atomicclocksstore.com/
Get into this link. You can download the user manual for your SkyScan clock from here.
OK.

Posted on Nov 10, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Looses time after day light savings time


Clock shouldn't lose time if it is receiving time signal. Do you have the signal indicator showing?
If not suggest you take the batteries out and reset the clock, making sure that you do not set a time.

Apr 02, 2013 | SkyScan 86742 Digital Atomic Wall Clock

1 Answer

How to adjust date and time free of charge


Hello,
You did not specify the phone you using.

To set date and time on your nokia phone

Select Menu > Settings and Phone > Date and
time.
Select from the following:
Time - Enter the current time.
Time zone - Select your location.
Date - Enter the date.
Date format - Select the date format.
Date separator - Select the symbol that separates days, months, and years.
Time format - Select the time format.
Time separator - Select the symbol that separates hours and minutes.
Clock type - Select the clock type.
Clock alarm tone - Select the tone for the alarm clock.
Alarm snooze time - Adjust the snooze time.
Workdays - Select your working days. You can then set an alarm only for working day mornings, for example.
Automatic time update - To update the time,date, and time zone, select On. This network service may not be available on all networks.

Regards

Jun 30, 2011 | Lands Phones

1 Answer

I have a clock that will not get correct time. I have no way yo set it . Model #44100 Equity.


All Equity Insta-Set clocks automatically set the correct time and date when you turn on the power. Occasionally, the automatic time-setting feature malfunctions and you must reset the time yourself. Manually changing the time to the correct time on an Equity Insta-Set clock requires the push of only a few buttons to get the clock back on track:

1. Press and hold the "Alarm Set" button for five to seven seconds, the year will begin to blink when the clock is ready for adjustment.
2. Set the year by pressing the right-arrow, "Up" or "+" button, depending on your model of clock
3. Set the month, day, hour and minute. Press the "Alarm Set" button to cycle through each field, and use the "Up," "+" or right-arrow button to adjust the values within each field.
4. Press the "Alarm Set" button after setting the date and time to store the information into your clock's memory.
Best regards,
gylacz

Mar 18, 2011 | Audio Players & Recorders

1 Answer

How to reset time zone for skyscan 86742?


Starting in time mode:

1. Press "MODE" (brings up alarm time) 2. Press "SET" (toggles between the four zones)


P - Pacific

M - Mountain

C - Central

E - Eastern

3. Once the desired time zone is set, press "MODE" to return to the clock.

Nov 07, 2010 | SkyScan 86742 Digital Atomic Wall Clock

1 Answer

I have a atomic clock and dont know how to set it


I have a skyscan Atomic clock model no 86730 and can't set it, every time i get it set, it goes back 1 hr, i need to know to set it to daylight savings time

Mar 17, 2010 | SkyScan 86742 Digital Atomic Wall Clock

1 Answer

Atomic clock is 2 hoursfast


You need to reset it to YOUR time zone. The default on this model is Pacific Coast time so you must be in the Central Time Zone (2 hours ahead of Central). Instruction manual should show you how to reset.

Feb 09, 2010 | SkyScan 86742 Digital Atomic Wall Clock

1 Answer

My solar clock needs setting. I set it back an


1) Pull the batteries and replace them, or gently insert a straightened paper clip into the "reset" hole in the back of the clock. The clock will beep.

2) Press the "receive" button" so the clock sets itself. The default time zone will be "EA".

3) Press the "adjust" button untill the time zone is showing (rather than the day-of-the-week).

4) Press and HOLD the "set" button down untill the hours digits start to flash2.gif.

5) Now press the "set" button again six times. The time zone characters will flash.

6) Press the "adjust" button untill your time zone appears.

7) Press the "mode" button to return the clock to normal operation.

8) Press the "adjust" button to display the day-of-week.

Nov 09, 2009 | SkyScan 86742 Digital Atomic Wall Clock

2 Answers

How do I set time zone


My 86742 batteries took a dump after many years so I ended up with the same problem. It took me about an hour to figure it out, but here is the solution:

1) Pull the batteries and replace them, or gently insert a straightened paper clip into the "reset" hole in the back of the clock. The clock will beep.

2) Press the "receive" button" so the clock sets itself. The default time zone will be "EA".

3) Press the "adjust" button untill the time zone is showing (rather than the day-of-the-week).

4) Press and HOLD the "set" button down untill the hours digits start to flash.

5) Now press the "set" button again six times. The time zone characters will flash.

6) Press the "adjust" button untill your time zone appears.

7) Press the "mode" button to return the clock to normal operation.

8) Press the "adjust" button to display the day-of-week.

Do you think they could have made it any MORE complicated?

May 18, 2009 | SkyScan 86742 Digital Atomic Wall Clock

Not finding what you are looking for?
SkyScan 86742 Digital Atomic Wall Clock Logo

Related Topics:

24 people viewed this question

Ask a Question

Usually answered in minutes!

Top SkyScan Home Experts

The Knight
The Knight

Level 3 Expert

72670 Answers

buzz flewhart
buzz flewhart

Level 3 Expert

655 Answers

Jerry Greenberg
Jerry Greenberg

Level 3 Expert

1667 Answers

Are you a SkyScan Home Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...