Question about Remote Controls

1 Answer

No picture or sound?

When I turn on the tv manually or w/remote, the green power on light is displayed to indicate power is on but the tv shows no picture or sound. i have a Apex 27 inch i have sound no picture

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Hi i have a 42 inch plasma samsung tv i have picture and no sound

Posted on Nov 16, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I got the huayu rm36e+s universal remote. Unfortunately there is no code listed for JAI TV. What is the code ???


  1. Turn on the TV first.
  2. On the remote, press SET for 3 seconds, or press SET and POWER, until indicator lights up. Release the key/s at the same time.
  3. Press and release the POWER key. The indicator will flash every few seconds. What it does is cycle through TV codes and transmit a "Volume +" command on your TV.
  4. Pay attention to the TV. When you see the Volume being adjusted on the screen, quickly press SET. The indicator light will turn off and you just successfully programmed your URC to work with your TV.

Apr 06, 2015 | Universal Remote Controls

1 Answer

Magnavox 37MF23ID, would not turn on. Power button only blinks (green light). We have switched power cords and nothing happens. No picture, no sound.


if the power light comes on but the screen stays black, then your TV might be on the wrong input Channel. for example: you switch inputs when you play games or watch dvds vs. watching regular tv. Try to change the input

Dec 27, 2014 | Magnavox Remote Controls

1 Answer

Red light on not green


helllllo.........red lite......[a] red lites means during the update if it lite red remove the thumb drive from the system ,unplug it from the wall outlet one minute +..then plug back in.make sure the system is power on[ showing green led] insert thumb drive....if problem persist call bose @ 1-877-335-2073us/1-877-701-2175canada.......bose-on see me on amazon for bose remotes bookbundler

Sep 01, 2014 | Bose Solo TV sound system - Black

1 Answer

Model 40BF1C-1108.LED TV.No display.Green indicator lighting.manual power, remote not working


open the r.control clean the keypads for dirty, oxide, corrosion,replace old batteries, and tight the spring contacts battery use plyer. and try again.

God bless you

Oct 29, 2013 | Remote Controls

1 Answer

Green indicating lamp blinking with no picture and no sound


How many times the indicator light blinks at one time. These number of blinks are important because, it it fault indications. Visit the site named 'Electro-help' for more details. Click this link. View it in Timeslide or Flipcard option, which can be selected from the drop down box menu by the Sidebar tag, at the top left corner of the display window. You can also click the Home tab to see the latest updates. It will make search easier. There are more than 1400 posts to different brand TVs till now. Setup proceedings and code list to different brand remote controls also included. Pull up older posts or do a search by type in the Brand Name of your device in the Search Box, at the top right of the display window.

Dec 12, 2012 | Hitachi P50X01A 50" MULTISYTEM PLASMA TV

1 Answer

Green indicating lamp blinching with no picture and no sound


Check this site for more details. It has more than 1400 posts to different brands of electronic entertainment and other equipments. All posts referrers with the repair and fault finding to electronic entertainment equipments. It will be best to view it either in Flipcard or Timeslide option, can be selected by the sidebar tag at the top left of the display screen. Timeslide view will be the best to select. If you are using Google Chrome as browser, Flipcard option will be the best.

Dec 12, 2012 | Hitachi P50X01A 50" MULTISYTEM PLASMA TV

1 Answer

Remote control not working with tv


The remote control is an acess to the TV device for example only from a distance. A remote controll for functionality would require to insert batteries a power source making possible communiction with devices requiring reception transmittion of signals. The remote is handheld pointed to the direction of TV requiring signal before button pressed woudl achieve response. a common button to start the remote control experience is pressing on the power button, that displays a signal on the TV. The TV should momentarily produce a sound and lighting effect,, and displaying on the dark screen a light blue screen. The initial signal response from remote control to TV indicates devices are functioning as required. Additional buttons on the remote controll could perform functions of several available.
The remote control has master button, menu on which every additional function is deriveable. Once the menu button is pressed with remote pointed in the direction of TV, should dicplay a list of options on the blue screen already established by power button. Every additional remote control device functionality is achievable by only after the first two buttons have been powered and pressed to display option results on a screen of TV. The remote controll buttons remaining perform complementary functionalities. For example, the arrow keys on remote control make movement of the options displayed on the screen, where a comfrimation button or identified as select allows to confirm remote functions displayed on the screen. A remote control could have several functionalities only accessible once made to display in screen. The three most common buttons on a remote control are First power button that powers on the TV, menu button that displays a list of functionalities on the powered on bl;ank blue screen, and using the arrow buttons on the remote would moves an indicator arround the screen area options. The selection button makes confrimation of the option.

Dec 02, 2010 | Philips Remote Controls

1 Answer

My remote for the samsung htc550 home theater system does not switch back to the set top after I have switched it to my tv. I no longer have a working remote for it and do not know how to switch it back....


Press the BD Receiver / TV button twice in quick succession. The light should now be orange which indicates it will operate the Home Cinema system....Pressing it twice again in quick succession will turn the light green indicating it will operate the TV.....Unfortunately the useless operator manual with the system does not tell you this....

Apr 29, 2010 | Samsung TV Remote Control

1 Answer

I need the code for sharp tv please


Configuring codes:
  1. Turn on the component that you want to set up. In the code listing find the 4-digit code numbers for your component brand.
  2. Hold the component key down until the green indicator light comes on. The green light should come on after approximately 3 seconds.
  3. Release the component key.
  4. If you are programming the DVD or CD device press the "action" key. The red indicator light will come on.
  5. Within thirty seconds, enter in a 4-digit code number. The component key lights will blink with an upward motion when a code has been successfully entered. In this case proceed to step #5. If the code has not been successfully entered, the componment lights will not blink. In this case return to strep #1 and start over.
  6. Test code by pressing "Power" key. If the component turns off, you've got the right code. Follow the same instructions to set up your other components. If the component doesn't turn off, return to step 2 and use the next 4-digit code listed. Note: If none of the codes turn your component off, try the Auto Code Scan function.

Auto Code Scan:
    The Auto Code Scan feature allows you to set up your components without having to enter in code numbers. The Jensen will do the work for you! (It may take a few minutes to find your code using this method.)
  1. Turn on the component that you want to set up.
  2. Hold the component key down until the light comes on. The green light should come on after approximately 3 seconds.
  3. Release the component key.
  4. If you are programming the DVD or CD device press the "action" key. The red indicator light will come on.
  5. Press "0" - "9" The green light will blink as codes are sent.
  6. As soon as the remote turns your component off, press the "action" key. (You have 1 second in which to press the "action" key to save the code.) The component key lights will blink with an upward motion when a code has been successfully entered. The component is now programmed. To find that code, proceed to Code Readback.
  7. If none of the codes turn your component off, return to step 2 and start over.

Code Readback:
  1. Hold the component key down until the green indicator light comes on. The green light should come on after approximately 3 seconds.
  2. Release the component key.
  3. If you are programming the DVD or CD device press the "action" key. The red indicator light will come on.
  4. Press the "enter" key.
  5. Count the number of times the green light blinks. There will be four numbers, separated by a two second pause. The red light will tum off after the remote is finished reading numbers back. Make sure you write the code number below for future use!

Multi-Component Power On/Off:
    The Jensen remote has the ability to turn On/Off multiple components at once. When you perform the following steps, you can turn On/Off the TV, VCR, Satellite, Cable Box and Audio Receiver.
  1. Press the "action" key.
  2. Press the "power" key. Note: This feature does not work for DVD and CD.

Volume Priority Punch-Through:
    When you press the volume keys on the remote they will control the volume on your TV. If you have a home theater system and want the volume keys to control your receiver only, you may set your volume priority to the receiver.
  1. Hold the "RCVR" key down until the green indicator light comes on. The green light should come on after about 3 seconds.
  2. Press "RCVR" key.
  3. Press "Vol+" key. To disable the volume priority you have to set and return to the default.
    To change back to TV priority:
  1. Hold the "RCVR" key down until the green indicator light comes on. The green light should come on after about 3 seconds.
  2. Press "RCVR" key.
  3. Press "Vol-" key. The volume priority will now default to the TV volume.
hope this helps
Robb

Apr 22, 2010 | Jensen SC-570 Remote Control

1 Answer

Our son dropped our Jensen Universal Remote, the batteries fell out, I no longer have the manual or code to reprogram it, can you help me. Have replaced batteries, red light is on, just can't get TV to...


Manually turn on the component you want to
program.

Find the three-digit code numbers for the
component brand.

Hold the Device key down until the green
indicator light comes on.

Release the Device key. Within 30 seconds,
enter in the three-digit code number. The light will flash when the right code has been entered.

press the Power key. If the component turns
off, you have found the right code.

Send me a mail get your tv code

Feb 18, 2010 | Jensen JR400 Remote Control

Not finding what you are looking for?
Remote Controls Logo

Related Topics:

609 people viewed this question

Ask a Question

Usually answered in minutes!

Top Remote Controls Experts

The Knight
The Knight

Level 3 Expert

68157 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Cindy Wells

Level 3 Expert

4753 Answers

Are you a Remote Control Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...